7600B, High Precision MEMS Accelerometer
- MEMS technology
- Same power supply requirements as strain gage sensors
- DC response
- Differential output
- 2.5 mV/g, 5 mV/g, 10 mV/g, 20 mV/g, 50 mV/g and 100 mV/g sensitivity available
- Available in ranges of 5g, 10g, 25g, 50g, 100g and 200g
- 0 to 600 Hz frequency range (3dB)
- 4-pin M4.5 x 0.35 radial connector
- Mounting via two 4-40 screws
- Weight: 3.6 grams
- Titanium
- Hermetic Seal
The Dytran 7600B series is a high precision variable capacitance (VC) accelerometer, designed to be used as a drop-in replacement for piezoresistive units in new or existing zero-to-medium frequency instrumentation applications.
Available with a 5g up to 200g range, the Dytran 7600B series incorporates a MEMS capacitive sensing element and an advanced ASIC to simulate piezoresistive bridge operation, as well as an integrated VC accelerometer chip with high drive, low impedance buffering. Units respond to both DC and AC acceleration. On-board regulation minimizes supply voltage variation effects, making them relatively insensitive to temperature changes and thermal gradients. Sensors are hermetically sealed for reliable operation in high humidity and dirty environments, and feature a custom integrated circuit amplifier and differential output stages, with a 4-pin M4.5 x 0.35 radial connector, and easy mounting via two 4-40 screws.
The Dytran 7600B series accelerometer uses the same power supply as piezoresistive and strain gage sensors, allowing them to operate as stand-alone differential output accelerometers or in place of piezoresistive bridge-type accelerometers.
Supplied Accessories: (2) model 6743 mounting washers, (2) model 6746 mounting screws (4-40)
Recommended Accessories: model 6749 triaxial mounting block
Compatible Cables: 6895A, 6948B, 6949A
| Type | DC Response |
| # of Axis | 1 |
| Full Scale | 5 g |
| 10 g | |
| 25 g | |
| 50 g | |
| 100 g | |
| 200 g | |
| Output | 2.5 mV/g |
| 5 mV/g | |
| 10 mV/g | |
| 20 mV/g | |
| 50 mV/g | |
| 100 mV/g | |
| Excitation | 3 - 11 V DC |
| Material | Titanium |
| Mounting | 4-40 Screw |
| Connection | 4-Pin Radial Connector |
| Min Temperature | -40 °C |
| Max Temperature | 120 °C |
| 7600B1 | 100 mV/g, 5g range |
| 7600B2 | 50 mV/g, 10g range |
| 7600B3 | 20 mV/g, 25g range |
| 7600B4 | 10 mV/g, 50g range |
| 7600B5 | 5 mV/g, 100g range |
| 7600B6 | 2.5 mV/g, 200g range |
7600B1_ATI Datasheet |
7600B2_ATI Datasheet |
7600B3_ATI Datasheet |
7600B4_ATI Datasheet |
7600B5_ATI Datasheet |
7600B6_ATI Datasheet |
- Differential output
- MEMS technology
- Same power supply requirements as strain gage sensors
- DC response
- 2.5 mV/g, 5 mV/g, 10 mV/g, 20 mV/g, 50 mV/g, 100 mV/g sensitivity available
- 5g, 10g, 25g, 50g, 100g, 200g ranges available
- 0 to 600 Hz frequency range (3dB)
- 4-pin M4.5 x 0.35 radial connector
| Type | DC Response |
| # of Axis | 1 |
| Full Scale | 5 g, 10 g, 25 g, 50 g, 100 g, 200 g |
| Output | 2.5 mV/g, 5 mV/g, 10 mV/g, 20 mV/g, 50 mV/g, 100 mV/g |
| Excitation | 3 - 11 V DC |
| Material | Titanium |