3049D, High Temperature Accelerometer
- High temperature
- Lightweight
- 5.8 pC/g sensitivity
- 8,000 Hz upper frequency range (±5%)
- 10-32 axial connector
- 10-32 stud mount
- Weight: 3.2 grams
- Linearity; 1.0% - best fit between any two points used for calibration
- Max. vibration: ± 1000 G
- Max. shock: 2000 G
- +350°F (+177°C) operation
- Hermetic Seal
- Titanium
- Base isolated
- Charge mode
The Dytran model 3049D is a rugged high temperature charge mode accelerometer, designed to reliably operate in temperatures up to +350°F (+177°C). Featuring a lightweight titanium housing and a sensitivity of 5.8 pC/g, the base of the model 3049D is electrically isolated to avoid EMI/ground loop interference. Units are also hermetically sealed for use in demanding environments.
This sensor is part of Dytran's 3049D piezoelectric accelerometer series, which differ only in terms of their mounting configuration. The model 3049D features a 10-32 mounting stud, while its counterpart, the model 3049D1, is offered with adhesive mounting capabilities.
Recommended Accessories: model 4110C current source power unit, 4705A series in-line charge amplifier (BNC jack to BNC jack), 4751B series in-line charge amplifier (10-32 jack to 10-32 jack)
Compatible Cables: 6002A, 6013A, 6019A, 6036A, 6037A, 6049A, 6057A, 6097A, 6411A, 6417A, 6419A, 6924A, 6991A
| Type | Charge Mode |
| # of Axis | 1 |
| Full Scale | 1000 g |
| Output | 5 pC/g |
| Material | Titanium |
| Mounting | 10-32 Stud |
| Connection | 10-32 Micro Coaxial |
| Min Temperature | -73 °C |
| Max Temperature | 177 °C |
3049D Datasheet |
- Lightweight
- Charge mode
- 5.8 pC/g sensitivity
- 8,000 Hz upper frequency range (±5%)
- 10-32 axial connector
- Adhesive mount
- +350°F (+177°C) operation
- Linearity; 1.0% - best fit between any two points used for calibration
| Type | Charge Mode |
| # of Axis | 1 |
| Full Scale | 1000 g |
| Output | 5 pC/g |
| Material | Titanium |
| Mounting | Adhesive |
- 0.40 pC/g sensitivity
- 5,000 Hz upper frequency range (±5%)
- 10-32 axial connector
- 10-32 stud mount
- +500°F (+260°C) operation
- Charge mode
- Weight 6.8 grams
- Stainless Steel
| Type | Charge Mode |
| # of Axis | 1 |
| Full Scale | 500 g |
| Output | 0.4 pC/g |
| Material | Stainless Steel |
| Mounting | 10-32 Stud |
- Charge mode
- +350°F (+177°C) operation
- Ultra miniature teardrop design
- 1.8 pC/g sensitivity
- 10,000 Hz upper frequency range (±10%)
- Integral 3-foot cable or removable 3-foot cable assembly (Models 3225E1/E2/E3)
- Adhesive mount
- Weight: 0.6 grams up to 0.7 grams (Model 3225E2 only)
| Type | Charge Mode |
| # of Axis | 1 |
| Full Scale | 400 g |
| Output | 1.8 pC/g |
| Material | Titanium |
| Mounting | Adhesive |
- Charge mode
- +350°F (+177°C) operation
- Low outgassing
- Ultra miniature teardrop design
- 1.8 pC/g sensitivity
- 10,000 Hz upper frequency range (±10%)
- Integral 3-foot cable assembly
- Adhesive mount
| Type | Charge Mode |
| # of Axis | 1 |
| Full Scale | 400 g |
| Output | 1.8 pC/g |
| Material | Titanium |
| Mounting | Adhesive |