3184E, Industrial Accelerometer
- IEPE
- Internal Faraday shield
- Available with water and oil resistant environmental boot
- 100 mV/g sensitivity
- 50g range
- 1 to 5,000 Hz frequency range (±5%)
- 2-pin axial connector
- 1/4-28 tapped hole
- Weight: 120 grams
- Max. vibration: ± 100 G
- Max. shock: 3000 G
- Stainless Steel
- Case isolated
The Dytran model 3184E is a highly rugged IEPE piezoelectric accelerometer with built-in Faraday shield for electrostatic noise immunity, a sensitivity of 100 mV/g, and excellent low frequency response.
Design of the model 3184E incorporates a ceramic shear sensing element, packaged in a stainless steel housing with a 2-pin MIL-C-5015 axial connector. Dytran model 3184E is also directly compatible with the model 6194 Immersion Proof sealing boot. When used together, the sensor remains fully functional in an IP65 environment. The model 3184E is also hermetically sealed for reliable operation in high humidity and dirty environments and case isolated to avoid EMI/ground loop interference.
Supplied Accessories: (1) model 6176 mounting stud (1/4-28 to 1/4-28)
Recommended Accessories: model 4110C current source power unit, model 6186 adhesive mounting base, model 6187 magnetic mounting base, model 6190 magnetic mounting base, model 6194 protective boot
Compatible Cables: 6038A, 6080A, 6082A, 6406A, 6407A, 6459A
| Type | Voltage Mode (IEPE) |
| # of Axis | 1 |
| Full Scale | 50 g |
| Output | 100 mV/g |
| Excitation | 20 - 32 V DC |
| Material | Stainless Steel |
| Mounting | 1/4-28 Tapped Hole |
| Connection | 2-Pin Axial Connector |
| Min Temperature | -51 °C |
| Max Temperature | 121 °C |
3184E_ATI Datasheet |
- IEPE
- Cost effective
- 100 mV/g sensitivity
- 50g range
- 0.3 to 10,000 Hz frequency range (±10%)
- 2-pin axial connector
- 10-32 tapped hole (3176B) or 1/4-28 tapped hole (3176B1)
- Weight: 44 grams
| Type | Voltage Mode (IEPE) |
| # of Axis | 1 |
| Full Scale | 50 g |
| Output | 100 mV/g |
| Excitation | 20 - 32 V DC |
| Material | Stainless Steel |
- IEPE
- Internal Faraday shield
- Available with water and oil resistant environmental boot
- 100 mV/g sensitivity
- 50g range
- 2 to 10,000 Hz frequency range (±10%)
- TNC axial connector
- 1/4-28 tapped hole
| Type | Voltage Mode (IEPE) |
| # of Axis | 1 |
| Full Scale | 50 g |
| Output | 100 mV/g |
| Excitation | 18 - 30 V DC |
| Material | Stainless Steel |
- Low frequency response
- IEPE
- Internal Faraday shield
- 1,000 mV/g sensitivity
- 5g range
- 0.5 to 1,000 Hz frequency range (±5%)
- 2-pin axial connector
- 1/4-28 tapped hole
| Type | Voltage Mode (IEPE) |
| # of Axis | 1 |
| Full Scale | 5 g |
| Output | 1000 mV/g |
| Excitation | 18 - 30 V DC |
| Material | Stainless Steel |
- IEPE
- 360° cable orientation
- 100 mV/g or 500 mV/g sensitivity
- 10g or 50g range
- 0.5 to 5,000 Hz frequency range (±5%)
- 2-pin radial connector
- 1/4-28 thru hole mount
- Weight: (3202A/A1) 160 grams, (3202A2/A3) 180 grams
| Type | Voltage Mode (IEPE) |
| # of Axis | 1 |
| Full Scale | 10 g, 50 g |
| Output | 100 mV/g, 500 mV/g |
| Excitation | 20 - 32 V DC |
| Material | Stainless Steel |
- IEPE
- 500 mV/g sensitivity
- 10g range
- 0.48 to 1,000 Hz frequency range (±5%)
- 2-pin axial connector
- 1/4-28 tapped hole
- Weight: 122 grams
- Max. vibration: ± 20 G
| Type | Voltage Mode (IEPE) |
| # of Axis | 1 |
| Full Scale | 10 g |
| Output | 500 mV/g |
| Excitation | 18 - 30 V DC |
| Material | Stainless Steel |