3192A, Industrial Low Frequency Seismic
- Low frequency response
- IEPE
- Internal Faraday shield
- 1,000 mV/g sensitivity
- 5g range
- 0.5 to 1,000 Hz frequency range (±5%)
- 2-pin axial connector
- 1/4-28 tapped hole
- Weight: 190 grams
- Max. vibration: ± 50 G
- Max. shock: 100 G
- Stainless Steel
- Hermetically Sealed
- Case isolated
The Dytran model 3192A is a rugged IEPE piezoelectric accelerometer with a sensitivity of 1000 mV/g, a built-in Faraday shield for electrostatic noise immunity, excellent low frequency response of 0.5 Hz and the capability to resolve vibrations as low as 0.00007 g's RMS.
Design of the model 3192A incorporates an annular shear ceramic sensing element, packaged in a stainless steel housing with a 2-pin MIL-C-5015 axial connector and 1/4-28 mounting hole. The sensor is hermetically sealed for reliable operation in high humidity and dirty environments and case isolated to avoid EMI/ground loop interference.
Supplied Accessories: (1) model 6176 mounting stud (1/4-28 to 1/4-28)
Suggested Accessories: model 4110C current source power unit, model 6186 adhesive mounting base, model 6187 magnetic mounting base, model 6190 magnetic mounting base, model 6194 protective boot
Compatible Cables: 6038A, 6080A, 6082A, 6406A, 6407A, 6459A
| Type | Voltage Mode (IEPE) |
| # of Axis | 1 |
| Full Scale | 5 g |
| Output | 1000 mV/g |
| Excitation | 18 - 30 V DC |
| Material | Stainless Steel |
| Mounting | 1/4-28 Tapped Hole |
| Connection | 2-Pin Axial Connector |
| Min Temperature | -51 °C |
| Max Temperature | 121 °C |
3192A Datasheet |
- High sensitivity
- IEPE
- 1,000 mV/g sensitivity
- 5g range
- 1 to 1,000 Hz frequency range (±5%)
- 10-32 radial connector
- 10-32 tapped hole
- Weight: 55 grams
| Type | Voltage Mode (IEPE) |
| # of Axis | 1 |
| Full Scale | 5 g |
| Output | 1000 mV/g |
| Excitation | 18 - 30 V DC |
| Material | Stainless Steel |
- High sensitivity
- IEPE
- IEEE 1451.4 TEDS capabilities
- 1,000 mV/g sensitivity
- 5g range
- 1 to 1,000 Hz frequency range (±5%)
- 10-32 radial connector
- 10-32 tapped hole
| Type | Voltage Mode (IEPE) |
| # of Axis | 1 |
| Full Scale | 5 g |
| Output | 1000 mV/g |
| Excitation | 18 - 30 V DC |
| Material | Stainless Steel |
- IEPE
- Cost effective
- 100 mV/g sensitivity
- 50g range
- 0.3 to 10,000 Hz frequency range (±10%)
- 2-pin axial connector
- 10-32 tapped hole (3176B) or 1/4-28 tapped hole (3176B1)
- Weight: 44 grams
| Type | Voltage Mode (IEPE) |
| # of Axis | 1 |
| Full Scale | 50 g |
| Output | 100 mV/g |
| Excitation | 20 - 32 V DC |
| Material | Stainless Steel |
- IEPE
- Internal Faraday shield
- Available with water and oil resistant environmental boot
- 100 mV/g sensitivity
- 50g range
- 1 to 5,000 Hz frequency range (±5%)
- 2-pin axial connector
- 1/4-28 tapped hole
| Type | Voltage Mode (IEPE) |
| # of Axis | 1 |
| Full Scale | 50 g |
| Output | 100 mV/g |
| Excitation | 20 - 32 V DC |
| Material | Stainless Steel |
- IEPE
- 500 mV/g sensitivity
- 10g range
- 0.48 to 1,000 Hz frequency range (±5%)
- 2-pin axial connector
- 1/4-28 tapped hole
- Weight: 122 grams
- Max. vibration: ± 20 G
| Type | Voltage Mode (IEPE) |
| # of Axis | 1 |
| Full Scale | 10 g |
| Output | 500 mV/g |
| Excitation | 18 - 30 V DC |
| Material | Stainless Steel |