3211M1, Submersible Single Axis IEPE Accelerometer
- IEPE
- 360° cable orientation
- Submersible to 175 psi
- 10 mV/g sensitivity
- 500g range
- 1 to 10,000 Hz frequency range (±5%)
- 10-foot integral cable
- Ø.17 thru hole mount for #8 or M4 screw
- Weight: 10 grams
- Titanium
- Hermetic Seal
- Base isolated
- Low profile
The Dytran model 3211M1 is a low profile IEPE accelerometer with a 10 mV/g sensitivity, weighing just 10 grams. The sensor features a factory molded urethane boot and a 10-foot integral urethane cable, for reliable operation in water depths to 175 psi.
Sensor design incorporates a ceramic shear sensing element for high natural frequency and integral low noise JFET electronics, encased within a rugged, lightweight titanium housing. The sensor is base isolated to avoid EMI/ground loop interference and mounts via #8 or M4 mounting screws.
Units are hermetically sealed for reliable operation in high humidity and dirty environments. A miniature thru hole design allows the sensor to be turned 360° prior to securing for ease of sensor installation.
Recommended Accessories: model 4110C current source power unit
| Type | Voltage Mode (IEPE) |
| Submersible | |
| # of Axis | 1 |
| Full Scale | 500 g |
| Output | 10 mV/g |
| Excitation | 18 - 30 V DC |
| Material | Titanium |
| Mounting | Thru Hole |
| Connection | 10-32 Micro Coaxial |
| Min Temperature | -54 °C |
| Max Temperature | 121 °C |
3211M1_ATI Datasheet |
- IEPE
- 360° cable orientation
- Low noise JFET electronics
- 10 mV/g or 100 mV/g sensitivity
- 50g or 500g range
- 1 to 10,000 Hz frequency range (±5%)
- 10-32 radial connector
- Ø.17 thru hole mount
| Type | Voltage Mode (IEPE) |
| # of Axis | 1 |
| Full Scale | 50 g, 500 g |
| Output | 10 mV/g, 100 mV/g |
| Excitation | 18 - 30 V DC |
| Material | Titanium |
- IEPE
- Low noise
- 360° cable orientation
- 10 mV/g sensitivity
- 500g range
- 1 to 10,000 Hz frequency range (±5%)
- 10-32 radial connector
- Ø.19 thru hole mount
| Type | Voltage Mode (IEPE) |
| # of Axis | 1 |
| Full Scale | 500 g |
| Output | 10 mV/g |
| Excitation | 15 - 24 V DC |
| Material | Titanium |
- IEPE
- Low noise JFET electronics
- Cost effective
- 10 mV/g, 20 mV/g, 50 mV/g, 100 mV/g, 200 mV/g or 500 mV/g sensitivity
- 10g, 25g, 50g, 100g, 250g or 500g range
- 1 to 10,000 Hz frequency range (±5%)
- 10-32 axial connector
- 10-32 tapped hole
| Type | Voltage Mode (IEPE) |
| # of Axis | 1 |
| Full Scale | 10 g, 25 g, 50 g, 100 g, 250 g, 500 g |
| Output | 10 mV/g, 20 mV/g, 50 mV/g, 100 mV/g, 200 mV/g, 500 mV/g |
| Excitation | 18 - 30 V DC |
| Material | Titanium |
- IEPE
- IEEE 1451.4 TEDS capabilities
- TEDS Operational Temperature Range: -40 to +85°C
- 10 mV/g, 20 mV/g, 50 mV/g, 100 mV/g, 200 mV/g or 500 mV/g sensitivity
- 25g, 50g, 100g, 250g, 500g range
- 1 to 10,000 Hz frequency range (±10%)
- 10-32 axial connector
- 10-32 tapped hole
| Type | Voltage Mode (IEPE) |
| # of Axis | 1 |
| Full Scale | 25 g, 50 g, 100 g, 250 g, 500 g |
| Output | 10 mV/g, 20 mV/g, 50 mV/g, 100 mV/g, 200 mV/g, 500 mV/g |
| Excitation | 18 - 30 V DC |
| Material | Titanium |
- IEPE
- 5 mV/g, 10 mV/g, 20 mV/g, 50 mV/g, 100 mV/g, 200 mV/g or 500 mV/g sensitivity
- 10g, 25g, 50g, 100g, 250gm, 500g, 1000g range
- 1 to 10,000 Hz frequency range (±10%)
- 10-32 axial connector
- 10-32 tapped hole
- Weight: 10 grams
- Titanium
| Type | Voltage Mode (IEPE) |
| # of Axis | 1 |
| Full Scale | 10 g, 25 g, 50 g, 100 g, 250 g, 500 g, 1000 g |
| Output | 5 mV/g, 10 mV/g, 20 mV/g, 50 mV/g, 100 mV/g, 200 mV/g, 500 mV/g |
| Excitation | 18 - 30 V DC |
| Material | Titanium |