4705M, In-Line Miniature Charge Amplifiers
Features:
- Weight 33 grams
- Size (0.50 x 2.56 in)
- 10-32 input connector to BNC output connector
- High frequency response bandwidth depends upon drive current and cable length
- Temperature Range: -46° to +85° C
- Stainless steel
- Epoxy Seal
Manufacturer: Dytran Instruments Inc.
Quote
Datasheet
Specifications
Models & Accessories
Downloads
Similar Products
4705M - Specifications
| Input Type | ±100 pC |
| ±500 pC | |
| ±5000 pC | |
| ±10000 pC | |
| # of Inputs | 1 |
| Output Type | ±5 V DC |
| Isolation | No |
| Supply Power | 18 - 30 V DC |
4705M - Models & Accessories
Models
| 4705M4 | Input Range: ±500 pC; Sensitivity: 10 mV/pC |
| 4705M5 | Input Range: ±5000 pC; Sensitivity: 1 mV/pC |
| 4705M11 | Input Range: ±100 pC; Sensitivity: 50 mV/pC |
| 4705M22 | Input Range: ±10000 pC; Sensitivity: 0.5 mV/pC |
4705M - Downloads
4705M4 In-Line Miniature Charge Amplifiers Datasheet |
4705M5 In-Line Miniature Charge Amplifiers Datasheet |
4705M11 In-Line Miniature Charge Amplifiers Datasheet |
4705M22 In-Line Miniature Charge Amplifiers Datasheet |
4705M - Similar Products
- 10 mV/pC sensitivity
- Weighs 25 grams
- Fast turn-on time
- Tolerates low insulation resistance from sensors
- 10-32 jack input connector
- High Temperature Sensors
- BNC jack output connector
- Miniature Package
| Input Type | ±500 pC, ±1000 pC, ±5000 pC |
| # of Inputs | 1 |
| Output Type | ±5 V DC |
| Max Bandwidth | 40 kHz |
| Isolation | No |
| Supply Power | 18 - 30 V DC |
- Weight 25 grams
- Size (0.50x1.75 in)
- 10-32 connectors
- Frequency response determined by cable length and output signal scope
- Temperature Range: -46° to +87° C
- Stainless steel
| Input Type | ±100 pC, ±500 pC, ±5000 pC, ±50000 pC |
| # of Inputs | 1 |
| Output Type | ±5 V DC |
| Isolation | No |
| Supply Power | 18 - 30 V DC |
- Weight 33 grams
- Size (0.50x3.15 in)
- BNC connectors
| Input Type | ±100 pC, ±500 pC, ±5000 pC, ±50000 pC |
| # of Inputs | 1 |
| Output Type | ±5 V DC |
| Max Bandwidth | 2 kHz |
| Isolation | No |
| Supply Power | 18 - 30 V DC |
- In-line Amplifier
- Compatible with Most full bridge strain gauge transducers
- Provides variable excitation and signal amplification
- Accepts both uni-polar or bi-polar input signals
- Simple controls for gain and zero adjustment
- Voltage / 4-20mA output
- IP 65 Rating
- Aluminum Housing
| Input Type | Strain Gauge |
| # of Inputs | 1 |
| Output Type | ±3 to ±10 V DC, 4 - 20 mA |
| Max Bandwidth | 5 kHz |
| Excitation | 3 - 10 V DC |
| Isolation | No |
- In-line Amplifier
- Compatible with any standard RDP LVDT (without integral electronics) and most LVDTs from any manufacturer
- Produces a DC output voltage or current
- Screw terminal connections
- Simple controls for gain and zero adjustment
- Input zero switch
- Signal overload indicator
- Synchronous demodulation
| Input Type | LVDT |
| # of Inputs | 1 |
| Output Type | ±4 to ±10 V DC, 4 - 20 mA |
| Max Bandwidth | 500 Hz |
| Excitation | 1 V AC |
| Isolation | No |