4751B1, B4 Miniature In-Line Charge Amplifiers
- Weight 25 grams
- Size (0.50x1.75 in)
- 10-32 connectors
- Frequency response determined by cable length and output signal scope
- Temperature Range: -46° to +87° C
- Stainless steel
Input Type | ±100 pC |
±500 pC | |
±5000 pC | |
±50000 pC | |
# of Inputs | 1 |
Output Type | ±5 V DC |
Isolation | No |
Supply Power | 18 - 30 V DC |
4751B1 | Input Range: ±100 pC; Sensitivity: 50 mV/pC |
4751B2 | Input Range: ±500 pC; Sensitivity: 10 mV/pC |
4751B3 | Input Range: ±5000 pC; Sensitivity: 1 mV/pC |
4751B4 | Input Range: ±50000 pC; Sensitivity: 0.1 mV/pC |
4751B Miniature In-Line Charge Amplifiers Datasheet |
- 10 mV/pC sensitivity
- Weighs 25 grams
- Fast turn-on time
- Tolerates low insulation resistance from sensors
- 10-32 jack input connector
- High Temperature Sensors
- BNC jack output connector
- Miniature Package
Input Type | ±500 pC, ±1000 pC, ±5000 pC |
# of Inputs | 1 |
Output Type | ±5 V DC |
Max Bandwidth | 40 kHz |
Isolation | No |
Supply Power | 18 - 30 V DC |
- Weight 33 grams
- Size (0.50 x 2.56 in)
- 10-32 input connector to BNC output connector
- High frequency response bandwidth depends upon drive current and cable length
- Temperature Range: -46° to +85° C
- Stainless steel
- Epoxy Seal
Input Type | ±100 pC, ±500 pC, ±5000 pC, ±10000 pC |
# of Inputs | 1 |
Output Type | ±5 V DC |
Isolation | No |
Supply Power | 18 - 30 V DC |
- Weight 33 grams
- Size (0.50x3.15 in)
- BNC connectors
Input Type | ±100 pC, ±500 pC, ±5000 pC, ±50000 pC |
# of Inputs | 1 |
Output Type | ±5 V DC |
Max Bandwidth | 2 kHz |
Isolation | No |
Supply Power | 18 - 30 V DC |
- In-line Amplifier
- Compatible with Most full bridge strain gauge transducers
- Provides variable excitation and signal amplification
- Accepts both uni-polar or bi-polar input signals
- Simple controls for gain and zero adjustment
- Voltage / 4-20mA output
- IP 65 Rating
- Aluminum Housing
Input Type | Strain Gauge |
# of Inputs | 1 |
Output Type | ±3 to ±10 V DC, 4 - 20 mA |
Max Bandwidth | 5 kHz |
Excitation | 3 - 10 V DC |
Isolation | No |
- In-line Amplifier
- Compatible with any standard RDP LVDT (without integral electronics) and most LVDTs from any manufacturer
- Produces a DC output voltage or current
- Screw terminal connections
- Simple controls for gain and zero adjustment
- Input zero switch
- Signal overload indicator
- Synchronous demodulation
Input Type | LVDT |
# of Inputs | 1 |
Output Type | ±4 to ±10 V DC, 4 - 20 mA |
Max Bandwidth | 500 Hz |
Excitation | 1 V AC |
Isolation | No |