1022V, Miniature
- Tension & Compression
- Titanium
- Weight: 4.5 g
- Mounting: 10-32 Tapped Holes Top & Bottom
- Linearity: ±1.0% F.S.
- Outer Diameter: 10.2mm
- Height: 12.4mm
- Hermetic
- Case Grounded
- 1.5m Integral Cable
- IEPE
The Dytran model 1022V is a miniature lightweight IEPE force sensor designed to offer low mass dynamic measurement capabilities within Dytran's smallest and most lightweight package. Measuring just 0.49 inches (12.4 millimeters) tall and weighing just 4.5 grams (less cable), the Dytran model 1022V offers precision force measurement capabilities of up to 50 lbf, with a 100 mV/lbf sensitivity and an unloaded 50 kHz natural frequency. As an IEPE sensor, the model 1022V features built-in electronics, eliminating the need for an external charge amplifier and converter.
Design of the model 1022V features a quartz sensing element, operating in compression mode and packaged in a lightweight titanium housing with an integral 5-foot coaxial cable terminating to a 10-32 coaxial connector. A series of 10-32 tapped holes, located at both the top and bottom of the sensor housing, are designed to facilitate mounting of the sensor in threaded holes on the driving rods and test specimen.
| Type | Piezoelectric |
| Application | Compression |
| Full Scale | 50 lbs |
| Output | 5 V DC |
| Precision | ±1.0 % FS |
| Excitation | 18 V - 30 V DC |
| Technology | Voltage Mode (IEPE) |
| Min Temperature | -73 °C |
| Max Temperature | 121 °C |
1022 V Miniature Load Cell, 4.5 g Datasheet |
- Weight 50 grams
- Size (outer diameter 1.10 in, inner diameter 0.40 in, height 0.50 in)
- Hermetic
- 10-32 radial connector
- 0.40 thru hole at center
- IEPE (2 to 20 mA, +18 to +30 VDC)
- Stainless steel
- Available in ranges of 100 LbF (1203V1)
| Type | Piezoelectric |
| Application | Compression |
| Full Scale | 100 lbs, 500 lbs, 1000 lbs, 5000 lbs, 10000 lbs |
| Output | 5 V DC |
| Precision | ±1.0 % FS |
| Excitation | 18 V - 30 V DC |
- Diameter 0.75 in
- Height 0.62 in
- 10-32 axial connector
- 1/4-28 mounting hole
- IEPE (2 to 20 mA, +18 to +30 VDC)
- Stainless steel
| Type | Piezoelectric |
| Application | Tension & Compression |
| Full Scale | 10 lbs, 50 lbs, 100 lbs, 500 lbs, 5000 lbs |
| Output | 5 V DC |
| Precision | ±1.0 % FS |
| Excitation | 18 V - 30 V DC |
- Weight 28 grams
- Size (diameter 0.75 in, height 0.62 in)
- 10-32 radial connector
- 1/4-28 mounting hole
- IEPE (2 to 20 mA, +18 to +30 VDC)
- Stainless steel
- General purpose dynamic force measurements
| Type | Piezoelectric |
| Application | Tension & Compression |
| Full Scale | 10 lbs, 50 lbs, 100 lbs, 500 lbs, 1000 lbs, 5000 lbs |
| Output | 5 V DC |
| Precision | ±1.0 % FS |
| Excitation | 18 V - 30 V DC |
- Weight 452-460 grams
- Diameter 2.00 in
- Height 1.25 in
- 10-32 axial & radial connector
- 3/8-16 tapped hole top surface
- 11/16-12 integral stem bottom surface
- IEPE (2 to 20 mA, +18 to +30 VDC)
- Stainless steel
| Type | Piezoelectric |
| Application | Tension & Compression |
| Full Scale | 500 lbs, 1000 lbs, 5000 lbs, 10000 lbs, 25000 lbs, 50000 lbs |
| Output | 5 V DC |
| Precision | ±1.0 % FS |
| Excitation | 18 V - 30 V DC |