1061V, IEPE
- Weight 452-460 grams
- Diameter 2.00 in
- Height 1.25 in
- 10-32 axial & radial connector
- 3/8-16 tapped hole top surface
- 11/16-12 integral stem bottom surface
- IEPE (2 to 20 mA, +18 to +30 VDC)
- Stainless steel
The Dytran Series 1060V/1061V is an IEPE force sensor designed to measure dynamic forces from 500 lbf to 50,000 lbf over a wide frequency range. Offered with a sensitivity from 0.1 mV/lbf to 10mV/lbf. As an IEPE sensor, the Series 1060V/1061V features built-in electronics, eliminating the need for an external charge amplifier and converter.
Design of the Series 1060V features a quartz sensing element, operating in compression mode and packaged in a rugged stainless steel housing weighing 452 grams. Units utilize a 10-32 radial connector and 3/8-16 tapped holes at both the top and bottom of the sensor housing for ease of mounting.
Supplied Accessories: (2) model 6232 mounting studs (3/8-16).
Series 1060V - 460 Grams with axial connector. (500 lbf to 50,000 lbf)
Series 1061V - 452 Grams with radial connector. (500 lbf to 50,000 lbf)
| Type | Piezoelectric |
| Application | Tension & Compression |
| Full Scale | 500 lbs |
| 1000 lbs | |
| 5000 lbs | |
| 10000 lbs | |
| 25000 lbs | |
| 50000 lbs | |
| Output | 5 V DC |
| Precision | ±1.0 % FS |
| Excitation | 18 V - 30 V DC |
| Technology | Voltage Mode (IEPE) |
| Min Temperature | -73 °C |
| Max Temperature | 260 °C |
| 1060V1 | |
| 1060V2 | |
| 1060V3 | |
| 1060V4 | |
| 1060V5 | |
| 1060V6 | |
| 1061V1 | |
| 1061V2 | |
| 1061V3 | |
| 1061V4 | |
| 1061V5 | |
| 1061V6 |
1061V High Temperature Load Cell 452g Datasheet |
- Diameter 0.75 in
- Height 0.62 in
- 10-32 axial connector
- 1/4-28 mounting hole
- IEPE (2 to 20 mA, +18 to +30 VDC)
- Stainless steel
| Type | Piezoelectric |
| Application | Tension & Compression |
| Full Scale | 10 lbs, 50 lbs, 100 lbs, 500 lbs, 5000 lbs |
| Output | 5 V DC |
| Precision | ±1.0 % FS |
| Excitation | 18 V - 30 V DC |
- Weight 28 grams
- Size (diameter 0.75 in, height 0.62 in)
- 10-32 radial connector
- 1/4-28 mounting hole
- IEPE (2 to 20 mA, +18 to +30 VDC)
- Stainless steel
- General purpose dynamic force measurements
| Type | Piezoelectric |
| Application | Tension & Compression |
| Full Scale | 10 lbs, 50 lbs, 100 lbs, 500 lbs, 1000 lbs, 5000 lbs |
| Output | 5 V DC |
| Precision | ±1.0 % FS |
| Excitation | 18 V - 30 V DC |
- Tension & Compression
- Titanium
- Weight: 4.5 g
- Mounting: 10-32 Tapped Holes Top & Bottom
- Linearity: ±1.0% F.S.
- Outer Diameter: 10.2mm
- Height: 12.4mm
- Hermetic
| Type | Piezoelectric |
| Application | Compression |
| Full Scale | 50 lbs |
| Output | 5 V DC |
| Precision | ±1.0 % FS |
| Excitation | 18 V - 30 V DC |