MS200, 200 kN (20 Ton) Assembly Servo Press
- Force range of 200 kN, (20 Ton)
- Stroke ranges available up to 200 mm
- Maximum speeds of up to 110 mm/s
- PC independent Force vs. Displacement Signature
- Analysis using:
- o Limits
- o Envelopes
- o Windows
- All popular PLC Interfaces:
- o EthernetIP
- o Digital I/O
- o DeviceNet
- o Profibus
- o CC-Link
- All limits, data and program info can be read and written through the PLC
The Coretec integrated servo press features a ball screw drive mounted on a custom collar load cell for force feedback. The repeatable force, displacement and speed control facilitated by the compact controller performs in process verification, providing added benefits such as early failure detectionand scrap reduction.
Don't settle with simple displacement and speed control or tolerate motor current draw approximation.
In addition to superior control,the integrated load cell and encoder can be used to perform Force vs. Distance Signature Analysis, with included PC software for Visualization and Data Collection.
This space-saving design and minimum mounting pitches allow for multi-axis press fitting with less installation time. Over time servo presses will provide cost savings compared to hydraulic presses, as there is less power, and less items to maintain.
Each press is "intelligent", and easily interchangeable when scheduled maintenance is required.
The press tool is equipped with a CPU enabling it to store items such as model numbers and load values in on board memory, thereby eliminating controller mismatch errors.
A specialized language for the servo press has been developed that permits description of complicated motions equivalent to robotic control systems.
The auto program generation provides examples based on your application, with comments generated. Application support will be provides as part of the system supplied by A-Tech Instruments Ltd.
| Max Force | 200 kN |
| Max Speed | 110 mm/s |
| Stroke | 100 mm |
| 200 mm | |
| Interface | Digital I/O |
| Profibus | |
| DeviceNet | |
| EthernetIP | |
| CC-Link |
Instruction Video for CPS Controller Ethernet TCP/IP Communication Setup with a Windows PC
instruction Video for CPS Controller Ethernet IP Communication Setup with PLC
Instruction Video for Coretec CS Series Servo Press Initialization and Auto Generation Programming using CORETEC CPS-SP Configurator. The procedure is identical for BS/MS series Servo Press Programming which uses BS-SP Configurator.
This video also discusses the Ethernet TCP/IP Communication Setup with the PLC and Manual Operation of the Servo Press Tool. This is similar to setup and communication with ProfiNet communication to & from a PLC.
Instruction Video for Coretec WPS Controller Ethernet TCP/IP communication setup using the Coretec WPS Configuration Software
Instruction Video for Coretec WPS Controller Ethernet IP Feildbus to PLC communication setup using the Coretec WPS Configuration Software
MS200-100B stp Drawings |
MS200-100C dxf Drawings |
MS200-200 dxf Drawings |
MS200-200B stp Drawings |
MS200-200C dxf Drawings |
MS200-200BC stp Drawings |
MS100-MS200 Datasheet |
AC Servo Presses Brochure |
MS200-100B stp Drawings |
MS200-100C dxf Drawings |
MS200-200 dxf Drawings |
MS200-200B stp Drawings |
MS200-200C dxf Drawings |
MS200-200BC stp Drawings |
- Force range of 100 kN, (10 Ton)
- Stroke ranges available up to 350 mm
- Maximum speeds of up to 150 mm/s
- PC independent Force vs. Displacement Signature
- Analysis using:
- o Limits
- o Envelopes
- o Windows
| Max Force | 100 kN |
| Max Speed | 150 mm/s |
| Stroke | 100 mm, 200 mm, 350 mm |
| Interface | Digital I/O, Profibus, DeviceNet, EthernetIP, CC-Link |
- Force range of 10 kN, (1 Ton)
- Stroke ranges available up to 350 mm
- Maximum speeds of up to 180 mm/s
- PC independent Force vs. Displacement Signature
- Analysis using:
- o Limits
- o Envelopes
- o Windows
| Max Force | 10 kN |
| Max Speed | 180 mm/s |
| Stroke | 100 mm, 150 mm, 250 mm |
| Interface | Digital I/O, Profibus, ProfiNet, DeviceNet, EthernetIP, CC-Link |
- Force range of 50 kN
- Stroke ranges available up to 350 mm
- Maximum speeds of up to 150 mm/s
- PC independent Force vs. Displacement Signature
- Analysis using: Limits, Envelopes, Windows
- All popular PLC Interfaces: EthernetIP, Digital I/O, DeviceNet, Profibus, CC-Link
- All limits, data and program info can be read and written through the PLC
| Max Force | 50 kN |
| Max Speed | 150 mm/s |
| Stroke | 100 mm, 200 mm, 350 mm |
| Interface | Digital I/O, Profibus, DeviceNet, EthernetIP, CC-Link |
- maximum Force Range, 30kN (3 Ton)
- Stroke ranges available – 100mm, 200mm and 350mm
- Special Stroke Range of 400 & 500mm
- Maximum actuator speed of 130 mm/sec.
- Cyclic loading up to 21kN without damage
| Max Force | 30 kN |
| Max Speed | 130 mm/s |
| Stroke | 100 mm, 200 mm, 350 mm, 400 mm, 500 mm |
| Interface | Digital I/O, ProfiNet, DeviceNet, EthernetIP, CC-Link |
- Maximum Force Range, 55 kN (5.5 Ton)
- Stroke ranges available – 100mm, 200mm & 350mm
- Maximum actuator speed of 200 mm/sec.
- Cyclic loading up to 45kN without damage
- Special Stroke Range of 500mm
| Max Force | 55 kN |
| Max Speed | 200 mm/s |
| Stroke | 100 mm, 200 mm, 350 mm, 400 mm, 500 mm |
| Interface | Digital I/O, ProfiNet, DeviceNet, EthernetIP, CC-Link |