9038, Pressure Controller - Discontinued
- Differential
- Dry Noncorrosive Gas
- Over Pressure 1.3 Times Rated Pressure
- 1/4" or 1/8" Compression Fitting
- Designed to Measure Single Differential Pressure
- Protection Class IP50
The differential reference 9038 is designed to control pressures between vacuum and +100 % of the instrument’s full scale pressure range. The instrument will control pressures at elevated reference (line) pressures. As an example, if the applied reference pressure was 10 psi (69 kPa) and the requested control pressure was 5.0 psi (35 kPa), the instrument would output 15 psi (105 kPa) on the output port. Standard units are manufactured for atmospheric reference. Elevated reference pressure requires factory modifications. The pressure standard is measured under microprocessor control to maintain the desired control pressure. The rezero solenoid allows the user to execute pneumatic rezero of the pressure standard on demand. The instrument may also be used in a measurement mode by applying the pressure to be measured to the output port. The instrument is protected by bi-directional relief valves designed to vent whenever either the output or reference port exceeds the other by 110% of the full scale pressure.
| Type | Controller |
| Full Scale | 1 psi |
| 5 psi | |
| Output | Ethernet |
| Precision | ±0.025 % FS |
| Excitation | 18 - 36 V DC |
| Min Temperature | -10 °C |
| Max Temperature | 60 °C |
9038 Pressure Controller Datasheet |
- Differential
- Dry Noncorrosive Gas
- Over Pressure 1.3 Times Rated Pressure
- 1/4" or 1/8" Compression Fitting
- Designed to Measure Single Differential Pressure
- Protection Class IP50
| Type | Controller |
| Full Scale | 1 psi, 5 psi |
| Output | Ethernet |
| Precision | ±0.025 % FS |
| Excitation | 18 - 36 V DC |
| Min Temperature | -10 °C |
- Pneumatic Intelligent Differential Pressure Scanner
- Dry Noncorrosive Gases
- Proof Pressure 3 Times Rated Pressure (< 15 psi)
- Proof Pressure 2 Times Rated Pressure (15 - 100 psi)
- Proof Pressure 1.5 Times Rated Pressure (> 100 psi)
- 16 Pressure Sensors from 10WC up to 850 psi
- 0.063" Tubulation & Compression Fittings Available
| Type | Scanner |
| # of Channels | 16 |
| Operational Mode | Differential |
| Full Scale | 1 psi, 2.5 psi, 5 psi, 10 psi, 15 psi, 30 psi, 45 psi, 100 psi, 250 psi, 500 psi, 750 psi, 850 psi |
| Output | Ethernet |
| Precision | ±0.05 % FS |
- Absolute
- Dry Noncorrosive Gas
- Over Pressure 1.3 Times Rated Pressure
- 1/4" or 1/8" Compression Fitting
- Designed to Measure Single Absolute Pressure
- Protection Class IP50
| Type | Controller |
| Full Scale | 11 - 16 psi, 15 psi, 23 psi, 30 psi, 45 psi, 65 psi, 100 psi, 200 psi, 300 psi, 500 psi, 750 psi |
| Output | Ethernet |
| Precision | ±0.01 % FS |
| Excitation | 18 - 36 V DC |
| Min Temperature | -10 °C |
- Absolute
- Dry Noncorrosive Gas
- Over Pressure 1.3 Times Rated Pressure
- 1/4" or 1/8" Compression Fitting
- Designed to Measure Single Absolute Pressure
- Protection Class IP50
| Type | Controller |
| Full Scale | 11 - 16 psi, 15 psi, 23 psi, 30 psi, 45 psi, 65 psi, 100 psi, 200 psi, 300 psi, 500 psi, 750 psi |
| Output | Ethernet |
| Precision | ±0.01 % FS |
| Excitation | 18 - 36 V DC |
| Min Temperature | -10 °C |
- Differential or Absolute compensated engineering unit pressure data
- Precision measurements are provided by dual 24-bit ADC’s for pressure & temperature
- Electrically Driven Valve (optional) gives the scanner a purge and re-zero facility.
- Precise Temperature measurement compensates for thermal effects on the Pressure Measurements.
- Pressure Ranges from 4”WC up to 45 psid and 16 to 58 psia
| Type | Scanner |
| # of Channels | 64 |
| Operational Mode | Absolute, Differential |
| Full Scale | 0.5 psi, 50 psi |
| Output | Ethernet, CANOpen |
| Precision | ±0.03 % FS, ±0.06 % FS |