8713, Potentiometric Linear Displacement Sensor
- Potentiometer
- Rectangular Profile Housing
- Aluminium
- Connection: 5-pin Plug Connector
- Available with Internal Spring
- Durability: 10^8 Operations
- Displacement Speed: up to 10m/s
Due to the technology employed in potentiometric displacement sensors, they always operate with a sliding contact system. Special processes are applied to give the resistance tracks low friction, low tendency to stick/slip, resistance to
abrasion and a long-term stability.
The rods are guided in long-life, low friction sliding bearings with close tolerances which provide high durability and measuring quality. The pre-stressed spring presses the sensor tip against the measurement object. This spring is
double-guided and disappears in the probe head, if the rod is in its end position.
The probe tip consists of a ball made of stainless steel. The bore at rod end serves for coupling retraction units.
The rod is protected against twist for measurement ranges up to 50 mm. The probe tip (hexagonal) must not be turned by any tool, otherwise its anti-twist protection will be destroyed.
| Type | Potentiometer |
| Full Scale | 10 mm |
| 25 mm [0.984"] | |
| 50 mm | |
| Output | Potentiometric |
| Non-Linearity | ±0.10 % FS |
| ±0.20 % FS | |
| ±0.30 % FS | |
| Resolution | 0.01 mm |
| Excitation | 0 - 14 V DC |
| 0 - 25 V DC | |
| 0 - 50 V DC | |
| IP Rating | IP40 |
| Min Temperature | -30 °C |
| Max Temperature | 100 °C |
Displacement on:
- Electromagnets
- Hydraulic cylinders
- Switches and buttons
- Measurements of Deformation
- Bending
- Press-fits
- Feed strokes
These displacement sensors are potentiometric displacement sensors used for direct measurement, testing and monitoring of mechanical displacements. The spring-loaded control rod eliminates the need of coupling with the measurement object.
A prerequisite for a very long life duration of the devices is a parallel alignment of the motion direction of the measurement object and the rod.
| 8713-10 | 10 mm Range |
| 8713-25 | 25 mm Range |
| 8713-50 | 50 mm Range |
| 8713-100 | 100 mm Range |
| 8713-125 | 125 mm Range |
| 8713-150 | 150 mm Range |
| 8712-10 | 10 mm Range |
| 8712-25 | 25 mm Range |
| 8712-50 | 50 mm Range |
| 8712-100 | 100 mm Range |
| 8712-125 | 125 mm Range |
| 8712-150 | 150 mm Range |
8713 Potentiometric Displacement Sensor Datasheet |
8713-10 CAD Drawing Drawings |
8713-25 CAD Drawing Drawings |
8713-50 CAD Drawing Drawings |
- Cost Effective Measurement for Strain Gauge, Potentiometer, Voltage and Current
- Transmitter for Linear Potentiometers
- Isolated Versions Available
- USB Connectivity for easy calibration
- DAQ Mode with a measuring rate - up to 7500 measurements per second
- 2 Button teach-in for Potentiometer
- Teach-in, allows easy setting of both min. and max. of the measuring range
- Output: 4…20 mA/0…10 V
| Interface | USB |
| Input Type | Potentiometer |
| # of Inputs | 1 |
| Output Type | 0 - 10 V DC, 4 - 20 mA, RS-485 |
| Excitation | 2.5 V DC |
| Isolation | Yes |
- ±0.2, ±2, ±20, ±200, ±300V & ±600V DC voltage ranges
- ±2, ±20, ±200 mA and ±5A DC current ranges
- 99.99% full scale accuracy ±2 counts
- Front panel scalable to ±99,999 for use with current shunts
- Transducer excitation output, 5, 10 or 24 Vdc (isolated)
- Universal 85-264 Vac / 90-300 Vdc or 10-48 Vdc / 12-32 Vac power
- Wide choice of options:
- 2 or 4 relays, mechanical or solid state (isolated)
- Potentiometer
- Rectangular Profile Housing
- Anodized Aluminium Housing
- Connection: 5-pin 9991 Plug Connector
- Durability: 10^8 Operations
| Type | Potentiometer |
| Full Scale | 10 mm, 25 mm [0.984"], 50 mm, 100 mm, 125 mm, 150 mm |
| Output | Potentiometric |
| Non-Linearity | ±0.05 % FS, ±0.10 % FS, ±0.20 % FS, ±0.30 % FS |
| Resolution | 0.01 mm |
| Excitation | 0 - 14 V DC, 0 - 25 V DC, 0 - 50 V DC |
- Potentiometer
- Rectangular Profile Housing
- Anodized Aluminum Housing
- Connection: 5-pin 9991 Plug Connector
- Duration: 10^8 Operations
- Displacement Speed up to 10m/s
| Type | Potentiometer |
| Full Scale | 25 mm [0.984"], 50 mm, 75 mm, 100 mm, 150 mm |
| Output | Potentiometric |
| Non-Linearity | ±0.05 % FS, ±0.10 % FS, ±0.20 % FS |
| Resolution | 0.01 mm |
| Excitation | 0 - 25 V DC, 0 - 60 V DC |
- Potentiometer
- Rectangular Profile Housing
- Anodized Aluminum Housing
- Connection: 1.0m Integral Cable
- Duration: 10^8 Operations
- Displacement Speed: up to 10m/s
| Type | Potentiometer |
| Full Scale | 25 mm [0.984"], 50 mm, 75 mm, 100 mm, 150 mm |
| Output | Potentiometric |
| Non-Linearity | ±0.05 % FS, ±0.10 % FS, ±0.20 % FS |
| Resolution | 0.01 mm |
| Excitation | 0 - 25 V DC, 0 - 60 V DC |
- Potentiometer
- Suitable for Mounting in Enclosed Devices
- Rectangular Profile Housing
- Anodized Aluminum Housing
- Connection: Soldering Pads on FR4 Cable & Lead Wires Available Upon Request
- Easy Mounting
- Long Life up to 50 Million Movements
| Type | Potentiometer |
| Full Scale | 10 mm, 25 mm [0.984"], 50 mm, 75 mm, 100 mm, 125 mm, 150 mm, 175 mm, 200 mm, 250 mm, 300 mm |
| Output | Potentiometric |
| Non-Linearity | ±0.05 % FS, ±0.10 % FS, ±0.20 % FS, ±0.25 % FS |
| Resolution | 0.01 mm |
| Excitation | 0 - 42 V DC |
- Potentiometer with Return Spring
- Rectangular Profile Housing
- Anodized Aluminum Housing
- Connection: TR Series: 2m Integral Cable
- Connection: TRS Series: 5-pin Round IEC 130-9 Connector
- Actuating Shaft with Double-Sided Support
- Special Ball-Coupling Eliminates Sideways Forces
- Long Life up to 100 Million Movements
| Type | Potentiometer |
| Full Scale | 10 mm, 25 mm [0.984"], 50 mm, 75 mm, 100 mm |
| Output | Potentiometric |
| Non-Linearity | ±0.05 % FS, ±0.10 % FS, ±0.15 % FS, ±0.20 % FS, ±0.25 % FS |
| Resolution | 0.02 mm |
| Excitation | 0 - 24 V DC, 0 - 42 V DC |