M70LL, Laser Distance Sensor
The analog sensors of series M70LL use a PSD for their receiver optics. This assures a continuous position measurement at high-speed movements. Replaceable protection classes and a robust casing allow the use even in dirty environments.
Features:
- Laser Sensor
- 100 kHz Measuring Frequency
- Square Profile
- Connection: 25-pin D-SUB Connector
- Reliable Results also with White/Black Transition
- Replaceable Protection Glasses
Quote
Datasheet
Specifications
Applications
Models & Accessories
Downloads
Similar Products
M70LL - Specifications
| Type | Laser |
| Full Scale | 0.5 mm [0.02"] |
| 2 mm | |
| 4 mm | |
| 10 mm | |
| 20 mm | |
| 50 mm | |
| 100 mm | |
| 200 mm | |
| Near Gap | 22 mm |
| 23 mm | |
| 23.8 mm | |
| 40 mm | |
| 55 mm | |
| 115 mm | |
| 170 mm | |
| 240 mm | |
| Output | 0 - 5 V DC |
| 0 - 10 V DC | |
| ±5 V DC | |
| ±10 V DC | |
| 0 - 20 mA | |
| 4 - 20 mA | |
| Ethernet | |
| Non-Linearity | ±0.30 % FS |
| Resolution | 0.33 mm |
| Excitation | 24 V DC |
| IP Rating | IP40 |
| IP64 | |
| Min Temperature | 0 °C |
| Max Temperature | 50 °C |
M70LL - Applications
Roundness Measurement: The sensor is mounted in a defined distance to the rotating object. Even smallest deviations from roundness are recognized due to a continuous displacement measurement.
IC Check: To avoid error during placement the ICs are detected by a M70LL laser sensor. Bent or absent pins are realised and can be signaled to the machine control.
Thus waste will be recognised immediately and the appropriate corrective action can be initiated without delay.
Thickness Measurement: Two sensors are measuring onto the top and the bottom side of the target. The thickness of the object results from the measured distance values.
Vibration Measurement: The M70LL measures the deflection of a membrane at vibrations up to 100 kHz
IC Check: To avoid error during placement the ICs are detected by a M70LL laser sensor. Bent or absent pins are realised and can be signaled to the machine control.
Thus waste will be recognised immediately and the appropriate corrective action can be initiated without delay.
Thickness Measurement: Two sensors are measuring onto the top and the bottom side of the target. The thickness of the object results from the measured distance values.
Vibration Measurement: The M70LL measures the deflection of a membrane at vibrations up to 100 kHz
M70LL - Models & Accessories
Models
| M70LL/0.5 | 0.5mm Range, Near Gap 23.75mm, Resolution 0.05µm |
| M70LL/2 | 2mm Range, Near Gap 23mm, Resolution 0.2µm |
| M70LL/4 | 4mm Range, Near Gap 22mm, Resolution 0.4µm |
| M70LL/10 | 10mm Range, Near Gap 40mm, Resolution 1µm |
| M70LL/20 | 20mm Range, Near Gap 55mm, Resolution 2µm |
| M70LL/50 | 50mm Range, Near Gap 115mm, Resolution 7.5µm |
| M70LL/100 | 100mm Range, Near Gap 170mm, Resolution 15µm |
| M70LL/200 | 200mm Range, Near Gap 240mm, Resolution 50µm |
M70LL - Downloads
M70LL Laser Distance Sensor Datasheet |
M70LL - Similar Products
- Laser Sensor
- 10 kHz Measuring Frequency
- Square Profile Housing
- Connection: 25-pin D-SUB Connector
- Reliable Results also with White/Black Transition
- Replaceable Protection Glasses
| Type | Laser |
| Full Scale | 0.5 mm [0.02"], 2 mm, 4 mm, 10 mm, 20 mm, 50 mm, 100 mm, 200 mm |
| Near Gap | 22 mm, 23 mm, 23.8 mm, 40 mm, 115 mm, 200 mm, 240 mm |
| Output | 0 - 5 V DC, 0 - 10 V DC, ±5 V DC, ±10 V DC, 0 - 20 mA, 4 - 20 mA, Ethernet |
| Non-Linearity | ±0.20 % FS |
| Resolution | 0.20 mm |
- Laser Sensor
- 10 kHz Measuring Frequency
- Square Profile Housing
- Connection: 2m Integral Cable
- Reliable Results also with White/Black Transition
| Type | Laser |
| Full Scale | 0.5 mm [0.02"], 2 mm, 4 mm, 10 mm, 20 mm, 50 mm, 100 mm, 200 mm, 400 mm |
| Near Gap | 22 mm, 23 mm, 23.8 mm, 40 mm, 55 mm, 95 mm, 170 mm, 240 mm, 480 mm |
| Output | 0 - 5 V DC, 0 - 10 V DC, ±5 V DC, ±10 V DC, 0 - 20 mA, 4 - 20 mA, RS-232 |
| Non-Linearity | ±0.20 % FS |
| Resolution | 0.60 mm |