LCV-USB2, USB Sensor Interface

The sensor interface LCV-USB2 is connected between sensor and PC. By this, analog sensor signals are digitized with up to 16 bit resolution. By the measuring rate of up to 5000 measurements per second, high dynamic measuring tasks are realizable.

The measured values are transferred to the PC via the USB interface and are visualized by the software. If a control signal is integrated in the sensor, an automatic adjustment can be carried out, which is checkable at any time (monitoring of the measuring chain).

Output signals can be digitally converted and comfortably be displayed and evaluated by the corresponding freely available evaluation software.

Many commercially available sensors e.g. force, torque, displacement or pressure sensors can be used with the LCV-USB2. The sensor parameters can be stored in the LCV-USB2. After a one-time parameterization, each sensor is recognized automatically by the software.

Thus, the measurement can be immediately started after the connection of the sensor through the USB-connector. The robust metal housing with high protection level allows fast fixation by screw-clamps or cable ties. The board module can also be integrated in larger sensor.

The connection to LabVIEW and/or integration in-house programs is possible with the freely available driver package