SCM5B41, Analog Input Modular Signal Conditioner
The SCM5B41 wide-bandwidth input module provides a single channel of strain gauge input which is filtered, isolated, amplified and converted to a high-level analog voltage output. These modules can share an analog bus without external multiplexers.
Features:
- Analog Input Module
- 1500 V Transformer Isolation
- Accuracy: ± 0.03%
- Module
- ANSI/IEEE C37.90.1 Transient Protection
- Input Protected to 240 V AC Continuous
Manufacturer: Dataforth
Quote
Datasheet
Specifications
Models & Accessories
Downloads
Similar Products
SCM5B41 - Specifications
| Family | Dataforth 5B |
| Input Type | ±1 V DC |
| ±5 V DC | |
| ±10 V DC | |
| ±20 V DC | |
| ±40 V DC | |
| # of Inputs | 1 |
| Output Type | 0 - 5 V DC |
| 0 - 10 V DC | |
| ±5 V DC | |
| ±10 V DC | |
| Bandwidth | 10 kHz |
| Isolation | Yes |
| Supply Power | 5 V DC |
SCM5B41 - Models & Accessories
Models
| SCM5B41-01 | ± 1 V Input, ± 5 V DC Output |
| SCM5B41-02 | ± 5 V Input, ± 5 V DC Output |
| SCM5B41-03 | ± 10 V Input, ± 5 V DC Output |
| SCM5B41-04 | ± 1 V Input, 0-5 V DC Output |
| SCM5B41-05 | ± 5 V Input, 0-5 V DC Output |
| SCM5B41-06 | ± 10 V Input, 0-5 V DC Output |
| SCM5B41-07 | ± 20 V Input, ± 5 V DC Output |
| SCM5B41-08 | ± 20 V Input, 0-5 V DC Output |
| SCM5B41-09 | ± 40 V Input, ± 5 V DC Output |
| SCM5B41-10 | ± 40 V Input, 0-5 V DC Output |
SCM5B41 - Downloads
SCM5B41 Datasheet |
AN101 RMS_Voltage_Current App Note |
AN121 RiseTime vs BW App Note |
AN126 Tuning_Surge_Tank_Level_Control_Loops App Note |
AN128 RMS Revisited App Note |
AN129 Harmonics and utility costs App Note |
Hysteresis Specifications Tech Note |
Faraday's Law of Induction Tech Note |
Data Acquisition Systems Accessories Tech Note |
Signal Conditioner Surge Withstand Capability Tech Note |
Signal-to-Noise Ratio, SNR Tech Note |
Signal Conditioning Measured vs Combinational Error Tech Note |
When Good Grounds Go Bad Tech Note |
Sample Test Report Tech Note |
Analog Signal Isolation and Protection Tech Note |
Why Should Sensors Be Isolated Tech Note |
SCM5B41 - Similar Products
- Analog Input Module
- 1500 V Transformer Isolation
- Accuracy: ± 0.03%
- Module
- ANSI/IEEE C37.90.1 Transient Protection
- Input Protected to 240 V AC Continuous
| Family | Dataforth 5B |
| Input Type | ±10 mV DC, ±50 mV DC, ±100 mV DC, ±1 V DC |
| # of Inputs | 1 |
| Output Type | 0 - 5 V DC, 0 - 10 V DC, ±5 V DC, ±10 V DC |
| Bandwidth | 10 kHz |
| Isolation | Yes |
- Strain Gauge Input Module
- 1500 V Transformer Isolation
- Accuracy: ± 0.03%
- Module
- ANSI/IEEE C37.90.1 Transient Protection
- Input Protected to 240 V AC Continuous
| Family | Dataforth 5B |
| Input Type | Strain Gauge |
| # of Inputs | 1 |
| Output Type | ±5 V DC, ±10 V DC |
| Bandwidth | 10 kHz |
| Excitation | 3.33 V DC, 10 V DC |
- Voltage Output Module
- 1500 V Transformer Isolation
- Accuracy: ±0.03%
- Module
- ANSI/IEEE C37.90.1 Transient Protection
- Track & Hold Circuit
| Family | Dataforth 5B |
| Input Type | 0 - 5 V DC, 0 - 10 V DC, ±5 V DC, ±10 V DC |
| # of Inputs | 1 |
| Output Type | 0 - 5 V DC, 0 - 10 V DC, ±5 V DC, ±10 V DC |
| Bandwidth | 400 Hz |
| Isolation | Yes |
- Accelerometer Input Module
- 1500 V Transformer Isolation
- Accuracy: ±0.20%
- Modular & Configurable
- ANSI/IEEE C37.90.1 Transient Protection
- Input Protected to 240 V AC Continuous
| Family | Dataforth 5B |
| Input Type | ±10 V DC |
| # of Inputs | 1 |
| Output Type | ±5 V DC, ±10 V DC |
| Bandwidth | 20 kHz |
| Isolation | Yes |
- Matched-Pair Servo/Motor Controller Module
- Extends the Distance and Isolates Servo/Motor Controller Signals
- Provides Isolated Current Loop Interface Between Controller and Motor or Actuator
- 1500 Vrms Transformer Isolation
- Accuracy: ±0.06%
- Paired Modules
- ANSI/IEEE C37.90.1 Transient Protection
- Input Protected to 240 V AC Continuous
| Family | Dataforth 5B |
| Input Type | 0 - 5 V DC, 0 - 10 V DC, ±5 V DC, ±10 V DC, 4 - 20 mA |
| # of Inputs | 1 |
| Output Type | 0 - 5 V DC, 0 - 10 V DC, ±5 V DC, ±10 V DC, 4 - 20 mA |
| Bandwidth | 1 kHz |
| Isolation | Yes |