SCM5B392, Analog Signal Conditioner Controller Modules
- Matched-Pair Servo/Motor Controller Module
- Extends the Distance and Isolates Servo/Motor Controller Signals
- Provides Isolated Current Loop Interface Between Controller and Motor or Actuator
- 1500 Vrms Transformer Isolation
- Accuracy: ±0.06%
- Paired Modules
- ANSI/IEEE C37.90.1 Transient Protection
- Input Protected to 240 V AC Continuous
- Mix and Match SCM5B Types on Backpanel
- CSA Certified, FM Approved, CE and ATEX Compliant
The SCM5B392 servo/motor controller module set is designed to solve the problem of extending a servo or motor controller signal a long distance with the possibility for noise pickup and/or contacting hazardous voltages. Each SCM5B392 module set is made up of two modules: a voltage input/current output module and a current input/voltage output module.
The voltage input module connects to the servo or motor controller voltage output and provides an isolated 4 to 20mA output which connects to the input of the current input module. The current input module isolates and provides an output voltage identical to that of the servo or motor controller. Thus the original control signal has been isolated (twice) and extended via a 4 to 20mA current loop.
Several mounting options are available for the SCM5B392 module set. If a large number of channels are required, the SCMPB01 16 channel backpanel and SCMPB05 8 channel backpanel are available. Smaller channel numbers can be accommodated with the SCMPB03 single channel mounting panel and SCMPB04 dual channel mounting panel. These can be mounted on a DIN rail.
| Family | Dataforth 5B |
| Input Type | 0 - 5 V DC |
| 0 - 10 V DC | |
| ±5 V DC | |
| ±10 V DC | |
| 4 - 20 mA | |
| # of Inputs | 1 |
| Output Type | 0 - 5 V DC |
| 0 - 10 V DC | |
| ±5 V DC | |
| ±10 V DC | |
| 4 - 20 mA | |
| Bandwidth | 1 kHz |
| Isolation | Yes |
| Supply Power | 5 V DC |
| SCM5B392-0111 | Paired Modules, 0-5 V Input, 0-5V Output, 4-20 mA Interface |
| SCM5B392-0212 | Paired Modules, ± 5 V Input, ± 5 V Output, 4-20 mA Interface |
| SCM5B392-0313 | Paired Modules, 0-10 V Input, 0-10 V Output, 4-20 mA Interface |
| SCM5B392-0414 | Paired Modules, ±10 V Input, ± 10 V Output, 4-20 mA Interface |
| SCM5B392-01 | Single Module, 0-5 V Input, 4-20 mA Output |
| SCM5B392-02 | Single Module, ± 5 V Input, 4-20 mA Output |
| SCM5B392-03 | Single Module, 0-10 V Input, 4-20 mA Output |
| SCM5B392-04 | Single Module, ± 10 V Input, 4-20 mA Output |
| SCM5B392-11 | Single Module, 4-20 mA Input, 0-5 V Output |
| SCM5B392-12 | Single Module, 4-20 mA Input, ± 5 V Output |
| SCM5B392-13 | Single Module, 4-20 mA Input, 0-10 V Output |
| SCM5B392-14 | Single Module, 4-20 mA Input, ± 10 V Output |
SCM5B392 Datasheet |
AN101 RMS_Voltage_Current App Note |
AN121 RiseTime vs BW App Note |
AN126 Tuning_Surge_Tank_Level_Control_Loops App Note |
AN128 RMS Revisited App Note |
AN129 Harmonics and utility costs App Note |
Hysteresis Specifications Tech Note |
Faraday's Law of Induction Tech Note |
Data Acquisition Systems Accessories Tech Note |
Signal Conditioner Surge Withstand Capability Tech Note |
Signal-to-Noise Ratio, SNR Tech Note |
Signal Conditioning Measured vs Combinational Error Tech Note |
When Good Grounds Go Bad Tech Note |
Sample Test Report Tech Note |
Analog Signal Isolation and Protection Tech Note |
Why Should Sensors Be Isolated Tech Note |
- Analog Output Module
- 1500 V Transformer Isolation
- Accuracy: ± 0.03%
- Module
- ANSI/IEEE C37.90.1 Transient Protection
- Input Protected to 240 V AC Continuous
| Family | Dataforth 5B |
| Input Type | 0 - 5 V DC, ±5 V DC, ±10 V DC, 0 - 20 mA |
| # of Inputs | 1 |
| Output Type | 0 - 20 mA, 4 - 20 mA, ±20 mA |
| Bandwidth | 275 Hz, 400 Hz |
| Isolation | Yes |
- General Purpose Input Module
- 1500 V Transformer Isolation
- Accuracy: ± 0.03%
- Module
- ANSI/IEEE C37.90.1 Transient Protection
- Input Protected to 240 V AC Continuous
| Family | Dataforth 5B |
| Input Type | ±1 V DC, ±2 V DC, ±3 V DC, ±4 V DC, ±5 V DC, ±6 V DC, ±7 V DC, ±8 V DC, ±9 V DC, ±10 V DC |
| # of Inputs | 1 |
| Output Type | ±5 V DC, ±10 V DC |
| Bandwidth | 1 kHz |
| Excitation | 10 V DC |
- Voltage Output Module
- 1500 V Transformer Isolation
- Accuracy: ±0.03%
- Module
- ANSI/IEEE C37.90.1 Transient Protection
- Track & Hold Circuit
| Family | Dataforth 5B |
| Input Type | 0 - 5 V DC, 0 - 10 V DC, ±5 V DC, ±10 V DC |
| # of Inputs | 1 |
| Output Type | 0 - 5 V DC, 0 - 10 V DC, ±5 V DC, ±10 V DC |
| Bandwidth | 400 Hz |
| Isolation | Yes |
- Narrow Bandwidth Voltage Input Module
- 1500 V Transformer Isolation
- Accuracy: ± 0.03%
- Module
- ANSI/IEEE C37.90.1 Transient Protection
- Input Protected to 240 V AC Continuous
| Family | Dataforth 5B |
| Input Type | ±10 mV DC, ±50 mV DC, ±100 mV DC, ±1 V DC |
| # of Inputs | 1 |
| Output Type | 0 - 5 V DC, 0 - 10 V DC, ±5 V DC, ±10 V DC |
| Bandwidth | 4 Hz |
| Isolation | Yes |
- Narrow Bandwidth Voltage Input Module
- 1500 V Transformer Isolation
- Accuracy: ± 0.03%
- Module
- ANSI/IEEE C37.90.1 Transient Protection
- Input Protected to 240 V AC Continuous
| Family | Dataforth 5B |
| Input Type | ±1 V DC, ±5 V DC, ±10 V DC, ±20 V DC, ±40 V DC |
| # of Inputs | 1 |
| Output Type | 0 - 5 V DC, 0 - 10 V DC, ±5 V DC, ±10 V DC |
| Bandwidth | 4 Hz |
| Isolation | Yes |