SCM5B48, Accelerometer Input Analog Modular Signal Conditioner
The SCM5B48 provides constant current excitation to piezoelectric IEPE* sensors, with builtin amplifiers. The excitation current, gain, and filter high-pass & low-pass cutoff frequencies are field-configurable through slide switches.
Features:
- Accelerometer Input Module
- 1500 V Transformer Isolation
- Accuracy: ±0.20%
- Modular & Configurable
- ANSI/IEEE C37.90.1 Transient Protection
- Input Protected to 240 V AC Continuous
Manufacturer: Dataforth
Quote
Datasheet
Specifications
Models & Accessories
Downloads
Similar Products
SCM5B48 - Specifications
| Family | Dataforth 5B |
| Input Type | ±10 V DC |
| # of Inputs | 1 |
| Output Type | ±5 V DC |
| ±10 V DC | |
| Bandwidth | 20 kHz |
| Isolation | Yes |
| Supply Power | 5 V DC |
SCM5B48 - Models & Accessories
Models
| SCM5B48-01 | ± 10 V Input, ± 10 V DC Output |
| SCM5B48-02 | ± 10 V Input, ± 5 V DC Output |
SCM5B48 - Downloads
SCM5B48 Datasheet |
AN101 RMS_Voltage_Current App Note |
AN121 RiseTime vs BW App Note |
AN126 Tuning_Surge_Tank_Level_Control_Loops App Note |
AN128 RMS Revisited App Note |
AN129 Harmonics and utility costs App Note |
Hysteresis Specifications Tech Note |
Faraday's Law of Induction Tech Note |
Data Acquisition Systems Accessories Tech Note |
Signal Conditioner Surge Withstand Capability Tech Note |
Signal-to-Noise Ratio, SNR Tech Note |
Signal Conditioning Measured vs Combinational Error Tech Note |
When Good Grounds Go Bad Tech Note |
Sample Test Report Tech Note |
Analog Signal Isolation and Protection Tech Note |
Why Should Sensors Be Isolated Tech Note |
SCM5B48 - Similar Products
- Matched-Pair Servo/Motor Controller Module
- Extends the Distance and Isolates Servo/Motor Controller Signals
- Provides Isolated Current Loop Interface Between Controller and Motor or Actuator
- 1500 Vrms Transformer Isolation
- Accuracy: ±0.06%
- Paired Modules
- ANSI/IEEE C37.90.1 Transient Protection
- Input Protected to 240 V AC Continuous
| Family | Dataforth 5B |
| Input Type | 0 - 5 V DC, 0 - 10 V DC, ±5 V DC, ±10 V DC, 4 - 20 mA |
| # of Inputs | 1 |
| Output Type | 0 - 5 V DC, 0 - 10 V DC, ±5 V DC, ±10 V DC, 4 - 20 mA |
| Bandwidth | 1 kHz |
| Isolation | Yes |
- Narrow Bandwidth Voltage Input Module
- 1500 V Transformer Isolation
- Accuracy: ± 0.03%
- Module
- ANSI/IEEE C37.90.1 Transient Protection
- Input Protected to 240 V AC Continuous
| Family | Dataforth 5B |
| Input Type | ±1 V DC, ±5 V DC, ±10 V DC, ±20 V DC, ±40 V DC |
| # of Inputs | 1 |
| Output Type | 0 - 5 V DC, 0 - 10 V DC, ±5 V DC, ±10 V DC |
| Bandwidth | 4 Hz |
| Isolation | Yes |
- Voltage Input Module
- 1500 V Isolation
- Accuracy: ± 0.05%
- Module
- ANSI/IEEE C37.90.1 Transient Protection
- Input Protected to 240 V AC Continuous
| Family | Dataforth 8B |
| Input Type | ±1 V DC, ±5 V DC, ±10 V DC, ±20 V DC, ±40 V DC, ±60 V DC |
| # of Inputs | 1 |
| Output Type | 0 - 5 V DC, ±5 V DC |
| Bandwidth | 20 kHz |
| Isolation | Yes |
- Voltage Input Module
- 1500 V Isolation
- Accuracy: ± 0.05%
- Module
- ANSI/IEEE C37.90.1 Transient Protection
- Input Protected to 240 V AC Continuous
| Family | Dataforth 8B |
| Input Type | ±20 mV DC, ±50 mV DC, ±100 mV DC |
| # of Inputs | 1 |
| Output Type | 0 - 5 V DC, ±5 V DC |
| Bandwidth | 15 kHz, 20 kHz |
| Isolation | Yes |
- General Purpose Input Module
- 1500 V Transformer Isolation
- Accuracy: ± 0.03%
- Module
- ANSI/IEEE C37.90.1 Transient Protection
- Input Protected to 240 V AC Continuous
| Family | Dataforth 5B |
| Input Type | ±1 V DC, ±2 V DC, ±3 V DC, ±4 V DC, ±5 V DC, ±6 V DC, ±7 V DC, ±8 V DC, ±9 V DC, ±10 V DC |
| # of Inputs | 1 |
| Output Type | ±5 V DC, ±10 V DC |
| Bandwidth | 1 kHz |
| Excitation | 10 V DC |