9206, Multi-Channel USB Sensor Interface
- Strain Gauge, Potentiometer and DC/DC Input
- Pt 100 Input (Option)
- 50 V Continuous Isolation
- Accuracy: ± 0.05%
- Desktop Interface up to 4 Sensor Inputs
- Aluminum Housing
- Protection Class: IP67
The 9206-V3 USB sensor interface takes its supply from the connected PC via the USB port, and uses it to generate the power supply for the sensors. The initial settings and sensor settings are made by burster in-house and saved in the USB sensor interface. These can then be fine-tuned by the customer.
Software provides display and archiving functions. But a license key enables an open-end expansion. 32 interfaces output curves may be displayed at the same time. One USB sensor interface can be connected as standard. Each sensor can be tared individually, and measurement curves can be displayed jointly or separately in a graph. We can configure the interface to suit a specific sensor, although customer-specific parameters can be changed using the free analysis software supplied.
The connection to LabVIEW or the integration into customers’ software is enabled by a free driver package.
Input Type | Voltage |
Strain Gauge | |
Thermocouple/RTD | |
Analog Inputs | 1 |
2 | |
4 |
In the field there is a frequent need to measure sensor readings rapidly and easily right at the sensor and to transfer them directly to a PC without additional amplifiers or converters.
The 9206 USB sensor interface can satisfy this requirement admirably, thanks to its "plug & measure" design. The USB connection means installation could not be simpler.
Typical Applications:
- Mobile test measurements via laptop
- Laboratory test setups
- Instrumentation and control
- Diagnostic measurements in the chemical industry
- PC-based recording of expansion figures of bio-engineering
9206-V000x | User-Defined Input Types, IP67 |
9206-V200x | User-Defined Input Types, IP40 |
9206-V3000 | |
9206-V3001 | |
9206-V |
9206 USB Sensor Datasheet |
9206-VX00X CAD Drawing Drawings |
9206-V3XXXX CAD Drawing Drawings |
- Input ranges for mV/V, V and mA
- Input Types; Load Cells, Potentiometer, Temperature Probes, Quadrature Encoders
- Input Types can be intermixed
- 16 bit A/D with sample of up to 5kHz
- Digitally selectable analogue input filters, 30, 300 & 3000 Hz
- Synchronicity of measuring input channels
- Adjustment and control signal activation via software
- LabVIEW and DLL-drivers available
Input Type | Voltage, Current, Strain Gauge, Thermocouple/RTD, Digital, Frequency, Encoder |
Analog Inputs | 1, 2, 4 |
Digital Inputs | 2 |
- Input ranges for mV/V, V and mA
- Input Types; Load Cells, Potentiometer, Temperature Probes, Quadrature Encoders
- Input Types can be intermixed
- 16 bit A/D with sample of up to 5kHz
- Digitally selectable analogue input filters
- Adjustment and control signal activation via software
- LabVIEW and DLL-drivers available
- Protection Level of IP67
Input Type | Voltage, Current, Strain Gauge, Thermocouple/RTD, Digital, Frequency, Encoder |
Analog Inputs | 1, 2 |
Digital Inputs | 2 |
- USB-Sensor-Interface with Configuration and Evaluation Software
- Supply of the MeasuringSystem via PC USB Port
- Fast Measurement of up to 5000 Measurements/s
- Up to 16 bit Resolution
- Input Ranges for mV, V and mA
- Integrable in large Sensors as Board
- Adjustment and Control Signal Switch via Software
- High Level of Protection IP67
Input Type | Voltage, Current, Strain Gauge |
Analog Inputs | 1 |
- Fast Measurement of up to 2500/s
- Up to 16 Bit Resolution
- Full Synchronism of both Measuring Channels
- Input Ranges for mV, V and mA
- Input Ranges combinable with each other
- Adjustment and Control Trigger via PC Software (USB)
Input Type | Voltage, Current, Strain Gauge |
Analog Inputs | 2 |