OMX 380T, Programmable Isolated Transmitter for Strain Gauge
The OMX 380 model range are very fast digital transmitters to DIN rail with and Teach-in function. Modifications available are PM, DU and T. The instrument is based on a single chip microcontroller, 24-bit A/D and 16-bit D/A converter, which...
Features:
- Transmitter for strain gauge
- Isolated Versions Available
- USB Connectivity for easy calibration
- DAQ Mode with a measuring rate - up to 7500 measurements per second
- 2 Button teach-in for Potentiometer
- Teach-in, allows easy setting of both min. and max. of the measuring range
- Output: 4…20 mA/0…10 V
- Power supply 18…30 VDC
- Option: Excitation, Data output, Power supply 10...30 V AC/DC
- Accuracy: ±0,025 % of range
- DIN Rail Mount
- Rating: IP20
Manufacturer: Orbit Merret
Quote
Datasheet
Description
Specifications
Downloads
Similar Products
OMX 380T - Description
The OMX 380 model range are very fast digital transmitters to DIN rail with and Teach-in function. Modifications available are PM, DU and T. The instrument is based on a single chip microcontroller, 24-bit A/D and 16-bit D/A converter, which ensures good accuracy, stability and easy operation of the instrument. Model OMX 380T is a fast digital transducer from load cell signal to standardised analogue output.
The instrument is controlled by two push buttons on the front panel. The mode
of the output signal and the access to the teach-in mode is realised by a switch
at the rear. Standard equipment is the OM Link interface, which together with
operating program allowes modification and filing of all instrument‘s settings as
well as performing firmware updates (with OML cable). All settings are stored in the EEPROM memory (they hold even after the instrument
is switched off).
The instrument is controlled by two push buttons on the front panel. The mode
of the output signal and the access to the teach-in mode is realised by a switch
at the rear. Standard equipment is the OM Link interface, which together with
operating program allowes modification and filing of all instrument‘s settings as
well as performing firmware updates (with OML cable). All settings are stored in the EEPROM memory (they hold even after the instrument
is switched off).
OMX 380T - Specifications
| Interface | USB |
| Input Type | Strain Gauge |
| # of Inputs | 1 |
| Output Type | 0 - 10 V DC |
| 4 - 20 mA | |
| RS-485 | |
| Excitation | 10 V DC |
| Isolation | Yes |
| Supply Power | 10 - 30 V DC |
| 18 - 30 V DC | |
| 10 - 30 V AC | |
| IP Rating | IP 20 |
OMX 380T - Downloads
OMX 380T, Signal Conditioner Datasheet |
OMX 380T - Similar Products
- Transmitter for strain gauge
- Programmable analog output: 0/4-20 mA, 0/5 mA, 0/2/5/10 V, ±10 V
- Measurement rate up to 7200 measurements per second
- Teach-in, tare, linearization, and digital filters
- Quick configuration via DIP switch or PC
- Galvanic isolation: 2.5 kVAC
- Power supply: 10-30 VDC/24 VAC
- RS485 and Ethernet communication protocols
| Interface | USB |
| Input Type | Strain Gauge |
| # of Inputs | 1 |
| Output Type | 0 - 2 V DC, 0 - 5 V DC, 0 - 10 V DC, ±10 V DC, 0 - 5 mA, 0 - 20 mA, 4 - 20 mA, RS-485 |
| Excitation | 10 V DC |
| Isolation | Yes |
- High Accuracy
- For Switch Cabinet Assembly, Width 23 mm, only
- Direct Connection to PLC
- Long Input Lead from GM 40 to Evaluation possible
- Easy to operate
- Voltage or Current Output
- DIN Rail Mount
- Rating: IP20
| Input Type | Strain Gauge |
| # of Inputs | 1 |
| Output Type | ±5 V DC, ±10 V DC, 4 - 20 mA |
| Max Bandwidth | 1 kHz, 5 kHz, 10 kHz |
| Excitation | 5 V DC, 10 V DC |
| Isolation | Yes |
- Process Monitor, for process signals
- Extremely fast digital transducer
- Isolated Versions Available
- USB Connectivity for easy calibration
- DAQ Mode with a measuring rate - up to 7500 measurements per second
- 2 Button teach-in for Potentiometer
- Teach-in, allows easy setting of both min. and max. of the measuring range
- Output: 4…20 mA/0…10 V
| Interface | USB |
| Input Type | 0 - 10 V DC, 0 - 20 mA, 4 - 20 mA |
| # of Inputs | 1 |
| Output Type | 0 - 10 V DC, 4 - 20 mA, RS-485 |
| Excitation | 15 V DC, 24 V DC |
| Isolation | Yes |
- Programmable Isolated Transmitters
- DC Voltmeter and ammeter
- Teach- In, Digital Filter, Tare
- Output: 0/4...20 mA/0...5 mA/0...2/5/10 V/10V
- Power Supply 10...30 V AC/DC
- Option: Comparators, Data Output, USB Interface
- Isolated
- Accuracy: ±0,15 % of range (for 20 meas./s)
| Interface | USB |
| Input Type | ±25 V DC, ±50 V DC, ±100 V DC, ±200 V DC, ±400 V DC, ±1 A, ±5 A |
| # of Inputs | 1 |
| Output Type | 0 - 2 V DC, 0 - 5 V DC, 0 - 10 V DC, ±10 V DC, 0 - 5 mA, 0 - 20 mA, 4 - 20 mA, RS-485 |
| Isolation | Yes |
| Supply Power | 10 - 30 V DC, 10 - 30 V AC |
- Programmable Isolated Transmitters
- Universal Counter
- Teach- In, Digital Filter, Tare
- Output: 0/4...20 mA/0...5 mA/0...2/5/10 V/10V
- Power Supply 10...30 V AC/DC
- Option: Comparators, Data Output
- Isolated
- Accuracy: ±0,05 % of value UQC
| Interface | USB |
| Input Type | Frequency, Counter |
| # of Inputs | 1 |
| Output Type | 0 - 2 V DC, 0 - 5 V DC, 0 - 10 V DC, ±10 V DC, 0 - 5 mA, 0 - 20 mA, 4 - 20 mA, RS-485 |
| Isolation | Yes |
| Supply Power | 10 - 30 V DC, 10 - 30 V AC |