CRFX-2000, imc CRONOSflex Base Unit
The CFRX-2000 base unit provides the core features of the imc CRONOSflex data acquisition system extended by online processing. Extensive real-time processing together with digital I/O and analog output a complete measurement and control system.
Features:
- imc CRONOSflex Base Unit
- 8/16 Digital Inputs, 4 Encoder Inputs (Optional)
- 8 Digital Outputs, 4 Analog Outputs (Optional)
- 1 Gbit Ethernet TCP/IP
- Multipurpose Data Acquisition
- Onboard Computation & Control Logic
- TCP/IP Ethernet Interface for PC Connectivity
- Onboard Flash, Optional Hard Drive Storage and/or Network Storage
- Standalone Operation & Power-Failure Control Logic
- GPS & External Display Connectivity
Manufacturer: imc Test & Measurement
Quote
Datasheet
Specifications
Applications
Models & Accessories
Downloads
Related Products
Similar Products
CRFX-2000 - Specifications
| Family | imc CRFX |
| Unit Type | Base |
| Standalone | |
| Max Throughput | 2000 kS/s |
| Field Interface | GPS |
| Sync Pulse | |
| Max Sample Rate | 100 kHz |
| Resolution | 16-bit |
| Communication | Ethernet |
| Min Temperature | -10 °C |
| -40 °C | |
| Max Temperature | 55 °C |
| 85 °C | |
| IP Rating | IP20 |
CRFX-2000 - Applications
Data logging of any analog, digital and field bus channels can be managed by a single base unit, with up to 100,000 samples per second per channel and up to 2,000,000 samples per second in total, streamed continuously to disk, flash storage, the control PC, remote viewers.
CRFX-2000 - Models & Accessories
Models
| CRFX-2000G | 2000 kS/s Max Throughput, -10°C to 55°C |
| CRFX-2000G-ET | 2000 kS/s Max Throughput, -40°C to 85°C |
| CRFX-2000G-I | 2000 kS/s Max Throughput, -10°C to 55°C, Isolated DC Supply Input |
| CRFX-2000G-I-ET | 2000 kS/s Max Throughput, -40°C to 85°C, Isolated DC Supply Input |
CRFX-2000 - Downloads
imc CRONOSflex, CRFX-400/CRFX-2000 Datasheet Datasheet |
imc Company Brochure Brochure |
CRFX_Ethernet_vs_EtherCAT Manual |
imc_CRONOS-series_Manual Manual |
TD CRFX Mounting Systems Manual |
CRFX-2000 - Related Products
2-8_2015_ATI.jpg)
- imc CRONOSflex Bridge Measurement Amplifier Module
- 8 Analog Input Channels
- Medium Signal Bandwidths of up to 5 kHz
- Sensor Supply with Adjustable Voltage Supply
- Software Selectable Quarter-Bridge Completion Between 120 & 350 ohms
- Graphical Configuration Wizard to Set Strain Gauge Bridges
- Supports imc Plug & Measure
- High Density DSUB Connectors Available
| Family | imc CRFX |
| Unit Type | Module |
| Input Type | Voltage, Current, Strain Gauge, ICP |
| Analog Inputs | 8 |
| Max Bandwidth | 5 kHz |
| Max Sample Rate | 100 kHz |
- imc CRONOSflex Universal Measurement Amplifier
- 8 Analog Input Channels
- Finely Adjustable Input Voltage Range (±5 mV to ±50 V)
- Each Channel with its Own Adjustable Filter & Simulatneous A/D Converter
- Graphical Configuration Wizard to Setup Strain Gauge Bridges
- Software Selectable Quarter Bridge Completion 120 & 350 ohms
- Supports imc Plug & Measure
| Family | imc CRFX |
| Unit Type | Module |
| Input Type | Voltage, Current, Strain Gauge, ICP, Thermocouple/RTD |
| Analog Inputs | 8 |
| Max Bandwidth | 48 kHz |
| Max Sample Rate | 100 kHz |
- imc CRONOSflex IEPE/ICP-Measurement Module
- 8 Analog Input Channels, Isolated
- Finely Adjustable Input Voltage Range (From ±5 mV to ±50 V)
- Input Coupling Switchable via Software: DC, AC, AC with Current Supply
- Each Channel with Adjustable Filter & Simultaneous A/D Converter
- Supports imc Plug & Measure
| Family | imc CRFX |
| Unit Type | Module |
| Input Type | Voltage, ICP |
| Max Bandwidth | 48 kHz |
| Max Sample Rate | 100 kHz |
| Resolution | 16-bit, 24-bit |
- imc CRONOSflex Audio Measurement Module
- 4 Analog Input Channels, Isolated
- Per-Channel Galvanic Isolation
- Robust & Feedback-Free Signal Acquisition
- Large Signal-to-Noise Ratio
- Low Signal Distortion
- High-Precision Measurements Over Broad Voltage Ranges
- Supports imc Plug & Measure
| Family | imc CRFX |
| Unit Type | Module |
| Input Type | Voltage, ICP |
| Analog Inputs | 4 |
| Max Bandwidth | 48 kHz |
| Max Sample Rate | 100 kHz |
- imc CRONOSflex Differential Measurement Module
- 8 Analog Inputs
- Channel-wise Isolated, Galvanically-separated Inputs
- Finely Adjustable Input Voltage Range (±5 mV to ±50 V)
- Each Channel with its Own Adjustable Filter & Simultaneous A/D Converter
- Supports imc Plug & Measure
- 40kHz bandwidth, 100,000 samples per second (4 to 20 Chns)
| Family | imc CRFX |
| Unit Type | Module |
| Input Type | Voltage, Current, ICP, Thermocouple/RTD |
| Analog Inputs | 8 |
| Max Bandwidth | 11 kHz |
| Max Sample Rate | 100 kHz |
- imc CRONOSflex Differential Measurement Amplifier Module
- 8 Analog Input Channels, Isolated
- Economical, High-Res Voltage & Current Measurement
- Finely Adjustable Input Voltage Range (±5 mV to ±50 V)
- Each Channel with its Own Adjustable Filter & Simultaneous A/D Converter
- Supports imc Plug & Measure
| Family | imc CRFX |
| Unit Type | Module |
| Input Type | Voltage, Current, ICP |
| Analog Inputs | 8 |
| Max Bandwidth | 48 kHz |
| Max Sample Rate | 100 kHz |
- imc CRONOSflex High Voltage & Current Measurement Module
- 4 Analog Input Channels, Isolated
- Measurement of up to 600 Vrms (CATIII)/ 1000Vrms (CATII)
- Phase Accuracy Better than 1° for measurements of up to the 50th Harmonic of 50/60 Hz Line Voltage
- Input Ranges from ±1000 V to 2.5 V, Selectable per Channel
- Direct Support for Use of Rogowski Coils
- Amplitude & Phase Response of Current Probes Recorded in TEDS, Used During Measurement
| Family | imc CRFX |
| Unit Type | Module |
| Input Type | Voltage, Current, High Voltage/Current |
| Analog Inputs | 4 |
| Max Bandwidth | 48 kHz |
| Max Sample Rate | 100 kHz |
- imc CRONOSflex Charge- & Audio Measurement Module
- 4 Analog Input Channels
- Per-Channel Galvanic Isolation
- Charge Measurement with Low Drift Over Time, for Quasi-Static Measurements
- Low Signal Distortion
| Family | imc CRFX |
| Unit Type | Module |
| Input Type | Voltage, ICP |
| Analog Inputs | 4 |
| Max Bandwidth | 48 kHz |
| Max Sample Rate | 100 kHz |
- Graphical User Interface ease of design capabilities
- Imc Hardware configuration and administration
- 3rd Party Hardware Interface available
- Visualization and Analysis of measured data
- Efficient trigger logic for Automated Data Acquisition & Control
- Real-time analysis and results captured and display
- Automated Test Sequence & Control options
- Complete Real-Time Test Automation
imc STUDIO 2024 is a modular software integrating multiple tools in a seamless environment, enhancing efficiency with improved metadata management, a new Python® interface, enhanced microphone calibration, and faster configuration handling.
- Data source and file format management
- Multi-faceted visualization
- Comprehensive data analysis with function assistant
- Report creation
- Quick processing of large data sets: 64 bit technology
- Automated macro-supported work flow
- Project oriented work approach
- Synchronize measurement data with maps or videos
No matter where the data originates – test stand, test setup or mobile measurement – imc FAMOS combines all the tools you need for professional visualization and analysis of your data: from data importing to print-ready reports. With a vast...
CRFX-2000 - Similar Products
- imc CRONOSflex Base Unit
- 8/16 Digital Inputs, 4 Encoder Inputs (Optional)
- 8 Digital Outputs, 4 Analog Outputs (Optional)
- Multipurpose Data Acquisition
- Onboard Computation & Control Logic
- TCP/IP Ethernet Interface for PC Connectivity
- Onboard Flash, Optional Hard Drive Storage and/or Network Storage
- Standalone Operation & Power-Failure Control Logic
| Family | imc CRFX |
| Unit Type | Base , Standalone |
| Max Throughput | 400 kS/s |
| Field Interface | GPS, Sync Pulse |
| Max Sample Rate | 100 kHz |
| Resolution | 16-bit |
- imc CRONOSflex Audio Measurement Module
- 4 Analog Input Channels, Isolated
- Per-Channel Galvanic Isolation
- Robust & Feedback-Free Signal Acquisition
- Large Signal-to-Noise Ratio
- Low Signal Distortion
- High-Precision Measurements Over Broad Voltage Ranges
- Supports imc Plug & Measure
| Family | imc CRFX |
| Unit Type | Module |
| Input Type | Voltage, ICP |
| Analog Inputs | 4 |
| Max Bandwidth | 48 kHz |
| Max Sample Rate | 100 kHz |
-8_2015_ATI.jpg)
- imc CRONOSflex Dynamic Strain Gauge Module
- 8 Analog Input Channels
- Very High Signal Bandwidth of up to 48 kHz
- Software Selectable Quarter-Bridge Completion Between 120 - 350 ohms
- Graphical Configuration Wizard to Set Strain Gauge Bridges
- Supports imc Plug & Measure
- High-Density DSUB Terminal Connection Available
| Family | imc CRFX |
| Unit Type | Module |
| Input Type | Voltage, Current, Strain Gauge, ICP |
| Analog Inputs | 8 |
| Max Bandwidth | 48 kHz |
| Max Sample Rate | 100 kHz |
- imc CRONOSflex Bridge Measurement Amplifier
- 4 Analog Input Channels
- Carrier Frequency Excitation (5 kHz) for Bridges & LVDT
- Supports Single & Dual Sense Line Configurations
- Symmetric Bridge Supply of 1 V, 2.5 V, 5 V with DC & AC Mode
- Broken Wire Detection
- Integrated Calibration Resistor for Shunt Calibration
- Software Selectable Quarter-Bridge Completion 120 & 350 ohms
| Family | imc CRFX |
| Unit Type | Module |
| Input Type | Voltage, Current, Strain Gauge, ICP |
| Analog Inputs | 4 |
| Max Bandwidth | 14 kHz |
| Max Sample Rate | 100 kHz |
- imc CRONOSflex Bridge Measurement Amplifier Module
- 8 Analog Input Channels
- Medium Signal Bandwidths of up to 5 kHz
- Sensor Supply with Adjustable Voltage Supply
- Software Selectable Quarter-Bridge Completion Between 120 & 350 ohms
- Graphical Configuration Wizard to Set Strain Gauge Bridges
- Supports imc Plug & Measure
- High Density DSUB Connectors Available
| Family | imc CRFX |
| Unit Type | Module |
| Input Type | Voltage, Current, Strain Gauge, ICP |
| Analog Inputs | 8 |
| Max Bandwidth | 5 kHz |
| Max Sample Rate | 100 kHz |