MAQ20-FREQ, Frequency Input Module
The MAQ20-FREQ input module has channels that are individually configurable for range and alarms to match the most demanding applications. Four controllable outputs can be used for sensor excitation or as 5 V logic compatible outputs.
Features:
- 8 Frequency Input Channels
- Range: 0.5 Hz to 1 MHz plus State Change
- 50 mV Sensitivity
- Input-to-Bus Isolation, 1500 Vrms
- Channels Protected up to 240 Vrms
- Configurable Channels
- Selective Enabling of Channels for Scanning
- 4 Excitation Sources to Power Sensors or Provide 5 V Logic Compatible Output
Manufacturer: Dataforth
Quote
Datasheet
Specifications
Downloads
Similar Products
MAQ20-FREQ - Specifications
| Family | Dataforth MAQ20 |
| Unit Type | Module |
| Input Type | Frequency |
| Digital Inputs | 8 |
| Min Temperature | -40 °C |
| Max Temperature | 85 °C |
MAQ20-FREQ - Downloads
MAQ20-FREQ Frequency Input Module Datasheet |
AN101 RMS_Voltage_Current App Note |
AN121 RiseTime vs BW App Note |
AN126 Tuning_Surge_Tank_Level_Control_Loops App Note |
AN128 RMS Revisited App Note |
AN129 Harmonics and utility costs App Note |
AN901Cross Point Switch using MAQ20-DORLY20 Module App Note |
AN902 MAQ20 PID Control in a Home Heating Application App Note |
Hysteresis Specifications Tech Note |
Faraday's Law of Induction Tech Note |
Data Acquisition Systems Accessories Tech Note |
Signal Conditioner Surge Withstand Capability Tech Note |
Signal-to-Noise Ratio, SNR Tech Note |
Signal Conditioning Measured vs Combinational Error Tech Note |
When Good Grounds Go Bad Tech Note |
Why Should Sensors Be Isolated Tech Note |
MAQ20-FREQ - Similar Products
- 5 Discrete Voltage Input Channels
- 5 Discrete Voltage Output Channels
- Input-to-Bus Isolation, 1500 Vrms
- Channel-to-Channel Isolation, 300 Vrms
- Overload & Reverse Protection
- Industrial Control
- User-Defined Default & Waveform Output
- 7 High Performance Special Functions
| Family | Dataforth MAQ20 |
| Unit Type | Module |
| Input Type | Voltage, Frequency |
| Analog Inputs | 5 |
| Analog Outputs | 5 |
| Min Temperature | -40 °C |
- 4 Discrete Voltage Input Channels
- 4 Discrete Voltage Output Channels
- Input-to-Bus Isolation, 1500 Vrms
- Channel-to-Channel Isolation, 300 Vrms
- Overload & Reverse Protection
- Industrial Control
- User-Defined Default & Waveform Output
- 7 High Performance Special Functions
| Family | Dataforth MAQ20 |
| Unit Type | Module |
| Input Type | Voltage, Frequency |
| Analog Inputs | 4 |
| Analog Outputs | 4 |
| Min Temperature | -40 °C |
- 8 Differential Thermocouple Input Channels
- Interface to Types J, K, T or R & S
- Input-to-Bus Isolation, 1500 Vrms
- Overload Protection up to 150 Vrms
- Configurable Channels
- Selective Enabling of Channels for Scanning
| Family | Dataforth MAQ20 |
| Unit Type | Module |
| Input Type | Thermocouple/RTD |
| Analog Inputs | 8 |
| Min Temperature | -40 °C |
| Max Temperature | 85 °C |
- 5 Analog Input Channels
- 4-Wire RTD (Pt100, Ni120) or Potentiometer Inputs
- Input-to-Bus Isolation, 1500 Vrms
- Overload Protection up to 240 Vrms
- Configurable Channels
- Selective Enabling of Channels for Scanning
| Family | Dataforth MAQ20 |
| Unit Type | Module |
| Input Type | Thermocouple/RTD |
| Analog Inputs | 5 |
| Min Temperature | -40 °C |
| Max Temperature | 85 °C |
- 6 Analog Input Channels
- 3-Wire RTD (Pt100, Ni120) or Potentiometer Inputs
- Input-to-Bus Isolation, 1500 Vrms
- Overload Protection up to 240 Vrms
- Configurable Channels
- Selective Enabling of Channels for Scanning
| Family | Dataforth MAQ20 |
| Unit Type | Module |
| Input Type | Thermocouple/RTD |
| Analog Inputs | 6 |
| Min Temperature | -40 °C |
| Max Temperature | 85 °C |