9235, Miniature Strain Gauge Input In-Line Amplifier
- Strain Gauge Input Amplifier
- Accuracy: < 0.10%
- In-Line Amplifier
- Aluminum Housing
- Protection Class: IP40 (IP65 Option)
- Space saving, lightweight
- Non-interchangeable and short circuit-proof
The sensor characteristics are first roughly preset by means of DIP switches, through an opening in the housing. The fine-tuning of the instrument zero and amplification settings is performed by means of a multiple trimmer, accessible by
screwdriver through holes drilled in the side of the housing. The amplifier connections are realized with sub-D plug and socket; short circuit-proof sensor power excitation and polarity reversal protection for the amplifier power excitation
afford additional safety for installation. If the amplifier has to be mounted to its environment, this is done by clamping the housing or affixing it with an adhesive. The amplifier’s cut-off frequency is > 1 kHz, its weight is < 65 g.
Input Type | Strain Gauge |
# of Inputs | 1 |
Output Type | ±10 V DC |
Max Bandwidth | 1 kHz |
Excitation | 2.5 V DC |
Isolation | No |
Supply Power | 15 - 30 V DC |
IP Rating | IP 40 |
Ideally suited for this purpose is the in-line measuring amplifier, which is inserted in between in the connection cable by means of plug contacts. Owing to its compact, robust design and low weight, it finds use in almost any application.
Even movable locations subject to forces of acceleration, for example manipulators, present no problems. It is intended mainly for use of control cabinets in just about any location and is matched to a specific sensor. The aluminium housing is extremely sturdy and affords the greatest possible protection even in harsh environments.
9235 | In-Line Amplifier |
9235-ABG | In-Line Amplifier with Factory Calibration |
9235 Series Datasheet |
9235-ABG STP File Drawings |
9235-V001 STP File Drawings |
- Strain Gauge Input
- 50 V Continuous Isolation
- Accuracy: 0.10%
- Multi-Channel up to 4 Inputs
- Aluminum Housing
- Available as Open Circuit without Housing
- Simple configuration using DIP switch
- Protection Class: IP20 (IP67 Option)
Input Type | Strain Gauge |
# of Inputs | 1, 2, 3, 4 |
Output Type | 0 - 5 V DC, 0 - 10 V DC, ±5 V DC, ±10 V DC |
Max Bandwidth | 1 kHz |
Excitation | 2.5 V DC |
Isolation | No |
- High Accuracy
- Direct Connection to PLC
- Long Input Lead Possibility from LCV to Evaluation
- Voltage or Current Output
- Integrable in large Sensors as Board
- High Level of Protection IP67
- Tube housing; IP67
- Linearity; 0.02% F.S.
Input Type | Strain Gauge |
# of Inputs | 1 |
Output Type | ±5 V DC, ±10 V DC, 0 - 20 mA, 4 - 20 mA |
Max Bandwidth | 1 kHz |
Excitation | 5 V DC |
Isolation | No |
- Input Ranges, 2.2 - 44 mV
- Excitation, 5 or 10 Vdc selectable
- High Accuracy
- Voltage or Current Output
- Direct Connection to PLC
- Long Input Lead from SI to Evaluation possible
- Applicable in heavy Industries by robust Aluminum Casting Housing
- High Level of Protection IP66
Input Type | Strain Gauge |
# of Inputs | 1 |
Output Type | ±5 V DC, ±10 V DC, 0 - 20 mA, 4 - 20 mA |
Max Bandwidth | 1 kHz, 5 kHz, 10 kHz |
Excitation | 5 V DC, 10 V DC |
Isolation | No |