CAN2, imc Fieldbus Interface - CANbus
- imc CANbus, Fieldbus Interface
- Transfer Protocol: CAN High Speed 1 Mbaud
- Transfer Protocol: CAN Low Speed 125 Kbaud
- Communication with CANSAS module via CANbus Interface
- Configuration and Monitoring is fully supported by imc STUDIO Software
- Occupies 1 Fieldbus Slot in the CRFX or CRC chassis
The CAN2 fieldbus system has a maximum transfer rate of 1 MBit/s which is widely prevalent and accepted in the automotive and other manufacturing industries.
Each Module has 2 Receive / Transmit ports. Multiple Feildbus modules can be provided within the CRFX and CRC chassis and 1 module is standard in all of the C-Series Data Acquisition and Control Systems.
These can be combined with LINbus, ARINC-429, Ethernet, RS232/485, Analog and digital modules. Each port supports up to 8 nodes as well as a variety of protocols such as CCP and KWP2000.
Measured data transmitted via CAN-Bus can be triggered, displayed and mathematically processed as desired. The protocol parameters are configured by means of the very user-friendly software, imc Studio or imc Devices, and can be saved in their physical units.
| Family | imc CRFX |
| Unit Type | Module |
| Field Interface | CANbus |
| Min Temperature | -10 °C |
| -40 °C | |
| Max Temperature | 55 °C |
| 85 °C |
These are used in the communication with CANbus devices to communicate "Real-Time" messages (data and conditions) within an vehicle, test bench, building, bridge, manufacturing process, etc.
There are numerous multi-drop applications along bridges, Railway Tracks, Airport Runways, within trains and ships, where the synchronised data is captured from sources that are up to 500 metres apart.
| CRFX/CAN2 | For CRFX Base Unit, CANbus Interface, -10°C to 55°C |
| CRFX/CAN2-ET | For CRFX Base Unit, CANbus Interface, -40°C to 85°C |
Digital Fieldbus Datasheet Datasheet |
imc Company Brochure Brochure |
TD_Digital_Fieldbus_connection_Options Datasheet |
- imc CRONOSflex Charge- & Audio Measurement Module
- 4 Analog Input Channels
- Per-Channel Galvanic Isolation
- Charge Measurement with Low Drift Over Time, for Quasi-Static Measurements
- Low Signal Distortion
| Family | imc CRFX |
| Unit Type | Module |
| Input Type | Voltage, ICP |
| Analog Inputs | 4 |
| Max Bandwidth | 48 kHz |
| Max Sample Rate | 100 kHz |
- imc CRONOSflex Digital Multiboard Option
- 8 Digital Input Channels
- 8 Digital Output Channels
- 4 Counter Input Channels
- 4 Analog Output Channels
- 16-bit Resolution
- Sampling Rate Adjustable in 1, 2, 5 Steps
| Family | imc CRFX |
| Unit Type | Module |
| Input Type | Digital, Frequency, Encoder |
| Digital Inputs | 12 |
| Analog Outputs | 4 |
| Digital Outputs | 8 |
- imc CRONOSflex Digital Multiboard Option
- 16 Digital Input Channels
- 8 Digital Output Channels
- 4 Counter Input Channels
- 16-bit Resolution
- Sampling Rate Adjustable in 1, 2, 5 Steps
| Family | imc CRFX |
| Unit Type | Module |
| Input Type | Digital, Frequency, Encoder |
| Digital Inputs | 20 |
| Digital Outputs | 8 |
| Max Sample Rate | 10 kHz, 50 kHz |
- imc RoaDyn, Fieldbus Interface
- Fully Supported by imc STUDIO Software
- Occupies 1 Fieldbus Slot
| Family | imc CRFX |
| Unit Type | Module |
| Field Interface | RoaDyn |
| Min Temperature | -10 °C, -40 °C |
| Max Temperature | 55 °C, 85 °C |
- imc APPMOD, Fieldbus Interface
- Supports TCP/IP, UDP
- C++ Programmable
- Fully Supported by imc STUDIO Software
- Occupies 1 Fieldbus Slot
| Family | imc CRFX |
| Unit Type | Module |
| Field Interface | RS-232/485, TCP/UDP |
| Min Temperature | -10 °C, -40 °C |
| Max Temperature | 55 °C, 85 °C |