MVB, imc Fieldbus Interface - MV-bus
The MVB-bus interface integrates the associated fieldbus into an imc measurement device in order to make the measurement channels, status information and control communication already in the vehicle available.
Features:
- imc MV-bus, Fieldbus Interface
- Hard-Wired for either EMD or ESD+
- Fully Supported by imc STUDIO Software
- Occupies 1 Fieldbus Slot
- Isolated
Manufacturer: imc Test & Measurement
Quote
Datasheet
Specifications
Models & Accessories
Downloads
Similar Products
MVB - Specifications
| Family | imc CRONOScompact |
| Unit Type | Module |
| Field Interface | MVB |
| Min Temperature | -10 °C |
| -40 °C | |
| Max Temperature | 55 °C |
| 85 °C |
MVB - Models & Accessories
Models
| CRC/MVB | For Portable CRONOScompact Housing, MVB Interface, -10°C to 55°C |
| CRC/MVB-ET | For Portable CRONOScompact Housing, MVB Interface, -40°C to 85°C |
| CRC/MVB-R | For Rack CRONOScompact Housing, MVB Interface, -10°C to 55°C |
| CRC/MVB-R-ET | For Rack CRONOScompact Housing, MVB Interface, -40°C to 85°C |
MVB - Downloads
Digital Fieldbus Datasheet Datasheet |
imc Company Brochure Brochure |
MVB - Similar Products
- imc LINbus, Fieldbus Interface
- Transfer Protocol: LIN 2.0; LIN 1.3
- Both LIN Specifications can Run Simultaneously
- "Master Node" 1000 ohm Resistor For Each Node
- Fully Supported by imc STUDIO Software
- Occupies 1 Fieldbus Slot
- Isolated
| Family | imc CRONOScompact, imc SPARTAN, imc CRONOS-SL |
| Unit Type | Module |
| Field Interface | LIN-Bus |
| Min Temperature | -10 °C, -40 °C |
| Max Temperature | 55 °C, 85 °C |
- imc CRONOScompact Fast Isolated Amplifier
- 8 Analog Input Channels, Isolated
- Voltage, Current, Temperature or ICP-Sensor Inputs
- 16-bit Resolution
- Overvoltage Protection
- Occupies 1 Slot
| Family | imc CRONOScompact |
| Unit Type | Module |
| Input Type | Voltage, Current, ICP, Thermocouple/RTD |
| Analog Inputs | 8 |
| Max Bandwidth | 48 kHz |
| Max Sample Rate | 100 kHz |
- imc CANbus, Fieldbus Interface
- Transfer Protocol: CAN High Speed 1 Mbaud
- Transfer Protocol: CAN Low Speed 125 Kbaud
- Parameterization of CANSAS module via CANbus Interface
- Fully Supported by imc STUDIO Software
- Occupies 1 Fieldbus Slot
- Isolated
| Family | imc CRONOScompact, imc SPARTAN, imc CRONOS-SL |
| Unit Type | Module |
| Field Interface | CANbus |
| Min Temperature | -10 °C, -40 °C |
| Max Temperature | 55 °C, 85 °C |
- imc CRONOScompact Differential Amplifier
- 8 Analog Input Channels, Differential
- Voltage, Current or ICP-Sensor Inputs
- Surge Protection
- Supports imc Plug & Measure
- Occupies 1 Slot
- Connectors for V, ma or ICP sensors under "Related" tab
| Family | imc CRONOScompact |
| Unit Type | Module |
| Input Type | Voltage, Current, ICP |
| Analog Inputs | 8 |
| Max Bandwidth | 20 kHz |
| Max Sample Rate | 100 kHz |
- imc CRONOScompact Fast Isolated Amplifier
- 16 Analog Input Channels, Differential
- Voltage or Current Inputs
- ICP-Sensor Inputs (option)
- Surge Protection
- Supports imc Plug & Measure
- Occupies 2 Slots
| Family | imc CRONOScompact |
| Unit Type | Module |
| Input Type | Voltage, Current, ICP |
| Analog Inputs | 16 |
| Max Bandwidth | 6.6 kHz |
| Max Sample Rate | 20 kHz |