5D30, LVDT Signal Conditioner
The 5D30 signal conditioner is based on the synchronous carrier-demodulator principle and can handle a remarkably wide range of signals with no special "long-stroke" cabling required for high-output sensors.
Features:
- For LVDT Signals
- 1500 V AC I/O Isolation
- Accuracy: 0.02% F.S.
- DIN-Rail, Panel or Fixture Mount
- Overvoltage Protection
- Extruded Aluminum Casing
Manufacturer: Daytronic Corp.
Quote
Datasheet
Specifications
Models & Accessories
Downloads
Similar Products
5D30 - Specifications
| Interface | RS-232 |
| Input Type | LVDT |
| # of Inputs | 1 |
| Output Type | 0 - 5 V DC |
| 0 - 10 V DC | |
| Max Bandwidth | 2 kHz |
| Excitation | 3 V AC |
| Isolation | Yes |
| Supply Power | 24 V DC |
5D30 - Models & Accessories
Models
| 5D30 | ±5 VDC Analog Output |
| 5D30S | ±5 VDC Analog Output |
| 5D30V | ±10 VDC Analog Output |
5D30 - Downloads
5D30 LVDT Signal Conditioner Datasheet |
5D30 - Similar Products
- For AC Strain Gauge Signals
- 1500 V AC I/O Isolation
- Accuracy: 0.02% F.S.
- DIN-Rail, Panel or Fixture Mount
- Overvoltage Protection
- Extruded Aluminum Casing
| Interface | RS-232 |
| Input Type | Strain Gauge |
| # of Inputs | 1 |
| Output Type | 0 - 5 V DC, 0 - 10 V DC |
| Max Bandwidth | 2 kHz |
| Excitation | 3 V AC |
- DIN Rail mount, LVDT Amplifier
- Compatible with any standard RDP LVDT (without integral electronics)
- Compatible with LIN & PY When fitted with two 1k Ohm bridge completion resistors (Does not provide analogue voltage linearisation for PY)
- Compatible with most LVDTs from any manufacturer
- Screw terminal connections
- Simple controls for gain and zero adjustment
- Input zero switch
- Signal overload indicator
| Input Type | LVDT |
| # of Inputs | 1 |
| Output Type | 0 - 10 V DC, ±10 V DC, 4 - 20 mA |
| Max Bandwidth | 250 Hz |
| Excitation | 1 V AC, 3 V AC |
| Isolation | Yes |
- For Frequency Signals
- 1500 V AC I/O Isolation
- Accuracy: 0.02% F.S.
- DIN-Rail, Panel or Fixture Mount
- Overvoltage Protection
- Extruded Aluminum Casing
| Interface | RS-232 |
| Input Type | Frequency |
| # of Inputs | 1 |
| Output Type | 0 - 5 V DC, 0 - 10 V DC |
| Max Bandwidth | 2 kHz |
| Excitation | 10 V DC |
- For DC Voltage Signals
- 1500 V AC I/O Isolation
- Accuracy: 0.02% F.S.
- DIN-Rail, Panel or Fixture Mount
- Overvoltage Protection
- Extruded Aluminum Casing
| Interface | RS-232 |
| Input Type | ±50 mV to ±150 V DC |
| # of Inputs | 1 |
| Output Type | 0 - 5 V DC, 0 - 10 V DC |
| Max Bandwidth | 2 kHz |
| Excitation | 10 V DC |
- For DC Strain Gauge Signals
- 1500 V AC I/O Isolation
- Accuracy: 0.02% F.S.
- DIN-Rail, Panel or Fixture Mount
- Overvoltage Protection
- Extruded Aluminum Casing
| Interface | RS-232 |
| Input Type | Strain Gauge |
| # of Inputs | 1 |
| Output Type | 0 - 5 V DC, 0 - 10 V DC |
| Max Bandwidth | 2 kHz |
| Excitation | 2 V DC, 5 V DC, 10 V DC |