SNDH-T, Quadrature Hall-Effect Speed & Direction Sensors
The SNDH-T series is a dual differential hall sensor that provides speed and direction information using a quadrature output with signals 90° phase shifted from each other. Target direction is determined by output lead/lag phase shifting.
Features:
- Dual Differential Hall-Effect Sensor
- Bipolar Complementary Metal-Oxide Semiconductor Technology
- Hall-effect magnetic sensing technology
- Advanced performance dynamic offset self calibration
- Air gap up to 2 mm [0.08 in]
- Near zero speed
- Automotive under-the-hood packaging integrity
- EMI hardened
- High frequency switching capability (1 hz to 15 kHz)
- -40 ºC to 150 ºC [-40 °F to 302 °F] continuous operating temperature
- Multiple connector options
- Short circuit protection
- Reverse voltage protection
- Open collector output
- Low jitter output
- O-ring seal
Quote
Datasheet
Specifications
Models & Accessories
Downloads
Similar Products
SNDH-T - Specifications
| Type | Hall Effect |
| Max Frequency | 15 kHz |
| Mounting | 6.3 mm Through Hole |
| Connection | AMP C-282192 |
| Min Temperature | -40 °C |
| Max Temperature | 150 °C |
SNDH-T - Models & Accessories
Models
| SNDH-T4C | 4-Wire Output, Connector |
| SNDH-T4L | 4-Wire Output, Leadwire |
| SNDH-T4P-G01 | 4-Wire Output, Pigtail with Rectangular Connector |
| SNDH-T4P-G02 | 4-Wire Output, Pigtail with Oval Connector |
SNDH-T - Downloads
SNDH-T Quadrature Hall-Effect Speed & Direction Sensors Datasheet |
SNDH-T - Similar Products
- Differential Hall-Effect Sensor
- Stainless Steel Housing (Model D12P)
- Smooth Flange Mount (Model D12A)
- Protection Class: IP67
- Mounting Thread: M12 x 1
- Connection: 4-pin M12 x 1 Connector (Model D12A)
- Connection: 24 AWG PTFE-Insulated Leads (Model D12P)
| Type | Hall Effect |
| Max Frequency | 20 kHz |
| Mounting | 10.8 mm OD flange |
| Connection | M12x1 |
| Min Temperature | -40 °C |
| Max Temperature | 125 °C |
- Zero Speed Hall-Effect Sensor
- Stainless Steel Housing
- Protection Class: IP67
- Mounting Thread: 5/8-18 UNF-2A
- Connection: 4-pin M12 x 1 Connector (Model F58A)
- Connection: 2-pin MS3102A Connector (Model F58AM)
- Connection: 22 AWG Silicone-Insulated Leads (Model F58S)
| Type | Hall Effect |
| Max Frequency | 15 kHz |
| Mounting | M12x1 |
| Connection | 22 AWG Silicone-Insulated Leads, MS3102A |
| Min Temperature | -40 °C |
| Max Temperature | 125 °C |
- Differential Hall-Effect Sensor
- O-Ring Sealed & Locator Key
- Mounting Thread: M12 x 1
- Connection: 4-pin M12 x 1 Connector
| Type | Hall Effect |
| Max Frequency | 15 kHz |
| Mounting | M12x1 |
| Connection | M12x1 |
| Min Temperature | -40 °C |
| Max Temperature | 125 °C |
- Hall-Effect Sensor
- Stainless Steel
- Protection Class: IP68
- Mounting Thread: 5/8-18 UNF-2A or 3/8-24 UNF-2A
- Connection: MS3106 or 20 AWG Teflon-Insulated Leads
- Simple Installation
- Omni-Directional to Target Orientation
- Digital Output
| Type | Hall Effect |
| Max Frequency | 15 kHz |
| Mounting | 3/8-24 UNF-2A, 5/8-18 UNF-2A |
| Connection | 24 AWG Leads |
| Min Temperature | -40 °C |
| Max Temperature | 125 °C |
- Zero Speed Hall-Effect Sensor
- Stainless Steel Housing
- Protection Class: IP67
- Mounting Thread: M12 x 1
- Connection: 4-pin M12 x 1 Connector (Model F12A)
- Connection: 22 AWG Silicone-Insulated Leads (Model F12S)
| Type | Hall Effect |
| Max Frequency | 15 kHz |
| Mounting | M12x1 |
| Connection | 22 AWG Silicone-Insulated Leads, M12x1 |
| Min Temperature | -40 °C |
| Max Temperature | 125 °C |