D12, Hall-Effect Speed Sensor
The D12 Hall-Effect sensors offer frequency of the output signal that is proportional to the speed. The unit also outputs a square wave push-pull signal.
Features:
- Differential Hall-Effect Sensor
- Stainless Steel Housing (Model D12P)
- Smooth Flange Mount (Model D12A)
- Protection Class: IP67
- Mounting Thread: M12 x 1
- Connection: 4-pin M12 x 1 Connector (Model D12A)
- Connection: 24 AWG PTFE-Insulated Leads (Model D12P)
Manufacturer: Jaquet North America Inc.
Quote
Brochure
Specifications
Models & Accessories
Downloads
Similar Products
D12 - Specifications
| Type | Hall Effect |
| Max Frequency | 20 kHz |
| Mounting | 10.8 mm OD flange |
| Connection | M12x1 |
| Min Temperature | -40 °C |
| Max Temperature | 125 °C |
D12 - Models & Accessories
Models
| D12A | Smooth Flange Mount, 25mm Shaft, 4-pin M12x1 Connector |
| D12P | M12x1 Thread, 50mm Thread Length, PTFE-Insulated Leads |
D12 - Downloads
Greenline Speed Sensor Brochure Brochure |
D12 - Similar Products
- Differential Hall-Effect Sensor
- O-Ring Sealed & Locator Key
- Mounting Thread: M12 x 1
- Connection: 4-pin M12 x 1 Connector
| Type | Hall Effect |
| Max Frequency | 15 kHz |
| Mounting | M12x1 |
| Connection | M12x1 |
| Min Temperature | -40 °C |
| Max Temperature | 125 °C |
- Dual Differential Hall-Effect Sensor
- Bipolar Complementary Metal-Oxide Semiconductor Technology
- Hall-effect magnetic sensing technology
- Advanced performance dynamic offset self calibration
- Air gap up to 2 mm [0.08 in]
- Near zero speed
- Automotive under-the-hood packaging integrity
- EMI hardened
| Type | Hall Effect |
| Max Frequency | 15 kHz |
| Mounting | 6.3 mm Through Hole |
| Connection | AMP C-282192 |
| Min Temperature | -40 °C |
| Max Temperature | 150 °C |
- Zero Speed Hall-Effect Sensor
- Stainless Steel Housing
- Protection Class: IP67
- Mounting Thread: M12 x 1
- Connection: 4-pin M12 x 1 Connector (Model F12A)
- Connection: 22 AWG Silicone-Insulated Leads (Model F12S)
| Type | Hall Effect |
| Max Frequency | 15 kHz |
| Mounting | M12x1 |
| Connection | 22 AWG Silicone-Insulated Leads, M12x1 |
| Min Temperature | -40 °C |
| Max Temperature | 125 °C |
- Zero Speed Hall-Effect Sensor
- Stainless Steel Housing
- Protection Class: IP67
- Mounting Thread: M16 x 1.5
- Connection: 4-pin M12 x 1 Connector (Model F16A)
- Connection: 22 AWG Silicone-Insulated Leads (Model F16S)
| Type | Hall Effect |
| Max Frequency | 15 kHz |
| Mounting | M16x1.5 |
| Connection | 22 AWG Silicone-Insulated Leads, M12x1 |
| Min Temperature | -40 °C |
| Max Temperature | 125 °C |
- Zero Speed Hall-Effect Sensor
- Stainless Steel Housing
- Protection Class: IP67
- Mounting Thread: 5/8-18 UNF-2A
- Connection: 4-pin M12 x 1 Connector (Model F58A)
- Connection: 2-pin MS3102A Connector (Model F58AM)
- Connection: 22 AWG Silicone-Insulated Leads (Model F58S)
| Type | Hall Effect |
| Max Frequency | 15 kHz |
| Mounting | M12x1 |
| Connection | 22 AWG Silicone-Insulated Leads, MS3102A |
| Min Temperature | -40 °C |
| Max Temperature | 125 °C |