S7AC, DC Powered LVDT Transducer Amplifier
- In-line Amplifier
- Compatible with any standard RDP LVDT (without integral electronics) and most LVDTs from any manufacturer
- Produces a DC output voltage or current
- Screw terminal connections
- Simple controls for gain and zero adjustment
- Input zero switch
- Signal overload indicator
- Synchronous demodulation
- IP 65 Rating
- Aluminum Housing
The unit is housed in a robust aluminium case with connections via glands, all sealed to IP65 specification. All controls are internal with coarse range switches and fine adjustment potentiometers for gain and zero setting. Other controls include a zero-input switch, over-range indicator and pins to which resisters can be fitted for half-bridge operation.
The unit is suitable for use with the complete range of RDP LVDT transducers.
Input Type | LVDT |
# of Inputs | 1 |
Output Type | ±4 to ±10 V DC |
4 - 20 mA | |
Max Bandwidth | 500 Hz |
Excitation | 1 V AC |
Isolation | No |
Supply Power | 12 - 36 V DC |
IP Rating | IP 65 |
S7AC Datasheet Datasheet |
S7AC Manual Tech Note |
- In-line Amplifier
- For use with a wide range of LVDT or half-bridge transducers
- Screw terminal connections
- Simple controls for gain and zero adjustment
- Input zero and circuit test switch
- Signal overload indicator
- Excitation frequency change via resistor
- 115/230V supply selector switch
Input Type | LVDT |
# of Inputs | 1 |
Output Type | ±10 V DC, 4 - 20 mA |
Max Bandwidth | 500 Hz |
Excitation | 5 V AC |
Isolation | No |
- In-line Amplifier
- 2-Wire 4-20mA-output oscillator/demodulator
- Compatible with most standard RDP LVDT (without integral electronics) transducers
- Compatible with most LVDTs from any manufacturer
- Simple controls for gain and zero adjustment
- Electrical output bandwidth: 0 to 250Hz (25Hz with filter turned on)
- High environmental protection, IP 65
- Limit trips
Input Type | LVDT |
# of Inputs | 1 |
Output Type | 4 - 20 mA |
Max Bandwidth | 250 Hz |
Excitation | 0.5 V AC |
Isolation | No |