S7MZ, 115/230V AC Powered Strain Gauge Transducer Amplifier
- In-line Amplifier
- Compatible with Most full bridge strain gauge transducers
- Screw terminal connections
- Simple controls for gain and zero adjustment
- Input zero and circuit test switch
- Signal overload indicator
- Synchronous demodulator
- Calibration: a "CAL" switch is included which connects a precision (59k) resistor across one arm of the bridge. The "SH.CAL" terminal may be used to operate this facility remotely via the internal relay
- Single jumper link selection of voltage or current output mode
- Voltage / 4-20mA output
- 115/230V supply selector switch
- 1 - 10kHz selectable excitation frequencies
- Aluminum Housing
- IP 65 Rating
A high stability oscillator provides sinusoidal excitation and a synchronous demodulator provides high level voltage or current outputs.
Further options include T (dual limits) or E (max/min store) which may also be used with Option Z, but T and E cannot be used together.
The module may be orientated in any direction but preferably with the glands facing away from any splashing, etc. Resistance to humidity is consistent with the IP rating.
The supply voltage is normally set to 230v unless specified otherwise by the user. If this is changed from that indicated on the label then the label must be changed accordingly.
The unit should be protected from the effects of excessive shock and/or vibration.
Input Type | Strain Gauge |
# of Inputs | 1 |
Output Type | ±10 V DC |
4 - 20 mA | |
Max Bandwidth | 500 Hz |
Excitation | 5 V AC |
Isolation | No |
Supply Power | 115 V AC |
230 V AC | |
IP Rating | IP 65 |
S7MZ Datasheet Datasheet |
S7MZ Manual Tech Note |
- In-line Amplifier
- For use with a wide range of LVDT or half-bridge transducers
- Screw terminal connections
- Simple controls for gain and zero adjustment
- Input zero and circuit test switch
- Signal overload indicator
- Excitation frequency change via resistor
- 115/230V supply selector switch
Input Type | LVDT |
# of Inputs | 1 |
Output Type | ±10 V DC, 4 - 20 mA |
Max Bandwidth | 500 Hz |
Excitation | 5 V AC |
Isolation | No |