9311, Next Generation Press Force Monitor

burster 9311 DigiForce Monitor Controller Ethernet TCP/IP communication setup video.       
This video discusses the initial configuration of the standard Ethernet communication port, 
This may be a prerequisite for data collection from the 9311 device, the data evaluation and
the development of the Curve Evaluation criteria, the Data Collection Windows & Acceptance
/ Reject Tolerance Windows.                     

burster 9311 DigiForce X & Y Channel input setup and Calibration,               
- this video explores the selection of input type, excitation, sensitivity, etc. 
- these inputs are typically X = Displacement & Y = Force                               .
- these inputs could also be X = Angle & Y = Torque                                         .
- this steps you through the full scale gain & offset for a Load Cell & LVDT . 

burster 9311 DigiForce X Channel Potentiometer Input Setup and Calibration, 
- this video explores the selection of input type, excitation, sensitivity, etc. 
- these inputs are typically X = Displacement                                                  .
- these inputs could also be X = Angle & Y = Torque                                       .
- these steps you through the full scale gain & offset for a Position Sensor    

burster 9311 DigiForce Y Channel input setup and Calibration                     ,
- this video explores the selection of input type, excitation, sensitivity, etc. 
- these inputs are typically Y = Force or Torque                                              .
- this steps you through the full scale gain & offset for a Load Cell & LVDT   .

burster 9311 DigiForce Monitor Controller Input Channel Configuration                    
- this video illustrates the selection of input type, sensitivity, teach-in, etc.             .
- these inputs are typically X = Potentiometer & Y = Strain Gauge Force Sensor.    .
- these inputs could also be X = Angle Pot or Encoder & Y = Rotary Torque Sensor.
- this steps you through the full scale gain & offset for a Load Cell & LVDT.            . 

burster 9311 DigiForce Monitor Controller Setup of the Measurement Mode

burster 9311 DigiForce Monitor Controller Ethernet IP for Control & Data Collection
- this video illustrates the selection of input type, sensitivity, teach-in, etc.             .
- these inputs are typically X = Potentiometer & Y = Strain Gauge Force Sensor.    .
- these inputs could also be X = Angle Pot or Encoder & Y = Rotary Torque Sensor.
- this steps you through the full scale gain & offset for a Load Cell & LVDT.            . 

burster 9311 DigiForce Monitor Controller Configuring an Evaluation Curve Window       
- this video illustrates the collection of a X - Y Signature Curve.                        .
- once data is collected, the curve is graphically illustrated for analysis.          .
- Tolerance Bands or Windows can be activated around the good part data.    .
- Specific Data within a Window can be transferred to the PLC via a Fieldbus.  .

burster 9311 DigiForce Monitor Controller Curve Window Evaluation Setup       
- this video illustrates the collection of a Data Signature Curve.                        .
- once data is collected, the curve is graphically illustrated for analysis.          .
- Tolerance Bands or Windows can be activated around the good part data.    .
- The Data within a Data Window can be transferred to the PLC via a Fieldbus.

burster 9311 DigiForce Monitor Controller Curve Window Envelope Evaluation Setup for a Signature Analysis
The Video of the standard Curve Window Evaluation Setup is a prerequisite for this video.
This video explores the unique Tolerance Band Curve Window that can be auto-created  ,  
for the purpose of acceptance and rejection of the Press Operation performed. There is the
possibility of 32 different programs, each can have a unique Tolerance Band Curve Window.

burster 9311 DigiForce Monitor Controller Curve Data Collection of a Signature                . 
This Video illustrates how to the Collect Data of a standard Curve Window for archiving and  
Evaluation Setup. There is the possibility of 32 different programs, each can have a unique
Tolerance Band Curve Window.                                                                                                  ,