BeanDevice AN-mV-XTD, Self Powered Wireless Analog Data Acquisition System
- Wireless analog data acquisition system with low voltage inputs (±20 mV), 4 analog channels
- Ultra-Power and license-free 2.4Ghz radio technology (IEEE 802.15.4E)
- High measurement accuracy: < 0.08%, 16-bit of resolution
- Maximum sampling rate: 400 samples per second
- Watertight (IP65 | Nema 4) aluminum casing
- TimSync function: Time-synchronization over the Wireless Sensor Networks with an accuracy of ±2.5 ms
- Programmable power supply (4.5VDC to 20VDC) for external sensors
The BeanDevice® AN-mV Xtender is a wireless data logger with analog voltage inputs (±20mV). Special care is taken in the analog signal conditioner design with an accuracy of ±0.4% (FS) and a dynamic range of 16-bits.
The BeanDevice® AN-mV Xtender comes with an integrated data Logger that can store up to 1 000 000 data acquisitions.
The sensor is directly powered by a high accuracy and adjustable DC/DC converter integrated inside the device. The excitation voltage is remotely configurable through the BeanScape® (4.5 to 20V). This device is powered by Lithium-thionyl chloride primary battery with a capacity of 6.5 Ah.
Characterized by a watertight (IP65) and small (146.05 mm x 65.5 mm x 33.5mm) aluminum enclosure, an ultra-low power (30 µA in sleeping mode), an integrated data logger that can store up to 1 000 000 data acquisitions, as well as a maximum wireless range of 1 Kilometer (L.O.S.), this wireless device is well suited for all types of industrial applications.
While the vast majority of wireless sensors show their limits in harsh industrial environment, the BeanDevice® AN-mV Xtender integrates an innovative antenna diversity design, boosting the radio link quality in environments subject to random and diverse disturbances. Antenna diversity improves both the quality and reliability of a wireless link by 30%.
The wide range of industrial protocols available on our wireless device (ModBus TCP/RTU/ASCII and OPC DA) enable an easy integration into your IT environment.
BeanScape 2.4GHz - How to use the Alarm - Data Acquisition Mode: https://youtu.be/XxWJT7A9ntY
BeanScape 2.4GHz - How to use Low Duty Cycle Data Acquisition Mode: https://youtu.be/TGDBPrFeO_8
Beanscape 2.4GHz - How to perform streaming in Data Acquisition Mode: https://youtu.be/OVVpj0V8svU
How to switch between Standard and Expert HMI View : https://youtu.be/HFtu7HapIeI
The BeanDevice® AN-mV Xtender is suitable for the following applications:
- Remote Monitoring
- Built-In test equipment
- Condition monitoring
- Structural Health Monitoring (SHM)
BeanDevice AN-mV-XTD Datasheet |
BeanDevice AN-mV-XTD User Manual Manual |
BeanDevice AN-mV-XTD Mechanical Drawing Drawings |
AN-RF-006 How to extend your wireless range App Note |
TN-RF-008 Data acquisition modes available on the BeanDevice Tech Note |
UM-RF-01, SmartSensor wireless accelerometer inclinometer and shock sensor Manual |
UM-RF-02, ProcessSensor-Wireless DAQ Manual |
UM-RF-03, EcoSensor Wireless Sensor for Environment Manual |