MS50, 50 kN (5 Ton) Assembly Servo Press
- maximum Force Range, 50kN (5 Ton)
- Stroke ranges available – 100mm, 200mm and 350mm
- Maximum actuator speed of 250 mm/sec.
- Cyclic loading up to 45kN without damage
- Special Stroke Range of 500mm
The MS50 has been redesigned for more Force and more Speed. It has the same bolt pattern as the existing CS50, the new CS55, the new CS80 and the existing MS100.
It can move up to 250mm per second, with stroke ranges from 100 to 350mm
Max Force | 50 kN |
Max Speed | 250 mm/s |
Stroke | 100 mm |
200 mm | |
350 mm | |
400 mm | |
500 mm | |
Interface | Digital I/O |
ProfiNet | |
DeviceNet | |
EthernetIP | |
CC-Link |
MS50 | Max. Speed 250mm/s |
MS50-100BK | 50kN Force Capacity Servo Press with 100 mm Stroke with Brake & M Load Holding |
MS50-200BK | 50kN Force Capacity Servo Press with 200 mm Stroke with Brake & M Load Holding |
MS50-350BK | 50kN Force Capacity Servo Press with 350 mm Stroke with Brake & M Load Holding |
MS50-400BK | 50kN Force Capacity Servo Press with 400 mm Stroke with Brake & M Load Holding, built to order |
MS50-500BK | 50kN Force Capacity Servo Press with 500 mm Stroke with Brake & M Load Holding, built to order |
Instruction Video for CPS Controller Ethernet TCP/IP Communication Setup with a Windows PC
Instruction Video for CPS Controller Ethernet IP Communication Setup with PLC
Instruction Video for Coretec CS Series Servo Press Initialization and Auto Generation Programming using CORETEC CPS-SP Configurator. The procedure is identical for BS/MS series Servo Press Programming which uses BS-SP Configurator.
This video also discusses the Ethernet TCP/IP Communication Setup with the PLC and Manual Operation of the Servo Press Tool. This is similar to setup and communication with ProfiNet communication to & from a PLC.
Instruction Video for Coretec WPS Controller Ethernet TCP/IP communication setup using the Coretec WPS Configuration Software
Instruction Video for Coretec WPS Controller Ethernet IP Feildbus to PLC communication setup using the Coretec WPS Configuration Software
MS50 Datasheet Brochure |
- Maximum Force Range, 50 kN (5 Ton)
- Stroke ranges available – 200mm and 400mm
- Maximum actuator speed of 215 mm/sec.
- Cyclic loading up to 40kN without damage
Max Force | 50 kN |
Max Speed | 215 mm/s |
Stroke | 200 mm, 400 mm |
Interface | Digital I/O, ProfiNet, DeviceNet, EthernetIP, CC-Link |
- Maximum Force Range, 55 kN (5.5 Ton)
- Stroke ranges available – 100mm, 200mm & 350mm
- Maximum actuator speed of 200 mm/sec.
- Cyclic loading up to 45kN without damage
- Special Stroke Range of 500mm
Max Force | 55 kN |
Max Speed | 200 mm/s |
Stroke | 100 mm, 200 mm, 350 mm, 400 mm, 500 mm |
Interface | Digital I/O, ProfiNet, DeviceNet, EthernetIP, CC-Link |
- maximum Force Range 80kN, (8 Ton)
- Stroke ranges available – 100mm, 200mm and 350mm
- Maximum actuator speed of 130 mm/sec.
- Cyclic loading up to 70kN without damage
- Special Stroke Range of 400mm available
Max Force | 80 kN |
Max Speed | 135 mm/s |
Stroke | 100 mm, 200 mm, 350 mm, 400 mm, 500 mm |
Interface | Digital I/O, ProfiNet, DeviceNet, EthernetIP, CC-Link |