Knick P27000, Universal High Voltage Isolated Signal Transmitter
- 480 calibrated input ranges, +/- 0.02 to +/- 200 V or +/- 0.1 to +/- 100mA (unipolar/bipolar)
- Output Signals: +/- 20 mA, +/- 10V, or 4…20 mA
- Flexible set-up through onboard dipswitches
- Galvanically isolated to 1000 V AC/DC (input and output channels), with test voltage of 5.4 kV AC
- 10kHz Cut-off frequency
- Response Time of 70 microseconds (T90)
- Compact, 22.5 mm wide din-rail mountable housing
- Broad-range power supply 20 … 253 V AC/DC
The Knick P27000 compact universal signal conditioners can accommodate input signals from ±20mV to ±200V or ±20mA to ±100mA. 480 calibrated ranges are selectable using DIP switches. 3-way transformer based continuous isolation to 1000 V (input and output) provided in a very compact 12.5 mm housing. Gain error of <0.08% of measured value helps ensure quality and accuracy of converted signal.
Knick’s P27000 High-Voltage Universal Signal Conditioner is a powerful solution for Test & Measurement. With its continuous isolation specification of 1000 V, it can pair with data acquisition systems (DAQ’s) in applications where the level of voltage protection needed is beyond the capability of the acquisition hardware.
There are an extensive number of input and output configurations available.
Input Type | 0 - 10 mV DC |
0 - 50 mV DC | |
0 - 100 mV DC | |
0 - 1 V DC | |
±5 V DC | |
±10 V DC | |
±20 V DC | |
Output Type | ±10 V DC |
4 - 20 mA | |
±20 mA | |
Max Bandwidth | 10 kHz |
Isolation | Yes |
Supply Power | 20 - 28 V DC |
80 - 250 V AC |
P 27000 Datasheet |
- Process Monitor, for process signals
- Extremely fast digital transducer
- Isolated Versions Available
- USB Connectivity for easy calibration
- DAQ Mode with a measuring rate - up to 7500 measurements per second
- 2 Button teach-in for Potentiometer
- Teach-in, allows easy setting of both min. and max. of the measuring range
- Output: 4…20 mA/0…10 V
Interface | USB |
Input Type | 0 - 10 V DC, 0 - 20 mA, 4 - 20 mA |
# of Inputs | 1 |
Output Type | 0 - 10 V DC, 4 - 20 mA, RS-485 |
Excitation | 15 V DC, 24 V DC |
Isolation | Yes |
- Programmable Isolated Transmitters
- DC Voltmeter and ammeter
- Teach- In, Digital Filter, Tare
- Output: 0/4...20 mA/0...5 mA/0...2/5/10 V/10V
- Power Supply 10...30 V AC/DC
- Option: Comparators, Data Output, USB Interface
- Isolated
- Accuracy: ±0,15 % of range (for 20 meas./s)
Interface | USB |
Input Type | ±25 V DC, ±50 V DC, ±100 V DC, ±200 V DC, ±400 V DC, ±1 A, ±5 A |
# of Inputs | 1 |
Output Type | 0 - 2 V DC, 0 - 5 V DC, 0 - 10 V DC, ±10 V DC, 0 - 5 mA, 0 - 20 mA, 4 - 20 mA, RS-485 |
Isolation | Yes |
Supply Power | 10 - 30 V DC, 10 - 30 V AC |
- DC Voltmeter and Ammeter
- Transmitters have galvanic separation with isolation voltage of 600 V
- By trimmers accessible from the face of the transmitter we may adjust the range of output signal within the range of ±10%
- Accuracy: ±0,1 % of range
- 35 mm wide DIN Rail Mount
- Rating: IP 20
Input Type | 0 - 450 V DC, 0 - 5 A |
# of Inputs | 1 |
Output Type | 0 - 2 V DC, 0 - 5 V DC, 0 - 10 V DC, ±10 V DC, 0 - 20 mA, 4 - 20 mA, ±20 mA |
Excitation | 5 - 24 V DC |
Isolation | Yes |
Supply Power | 10 - 30 V DC, 10 - 30 V AC, 80 - 250 V AC |
- Process Monitor
- Transmitters have galvanic separation with isolation voltage of 600 V
- By trimmers accessible from the face of the transmitter we may adjust the range of output signal within the range of ±10%
- Accuracy: ±0,1 % of range
- 35 mm wide DIN Rail Mount
- Rating: IP 20
Input Type | 0 - 2 V DC, 0 - 5 V DC, 0 - 10 V DC, 0 - 5 mA, 0 - 20 mA, 4 - 20 mA |
# of Inputs | 1 |
Output Type | 0 - 2 V DC, 0 - 5 V DC, 0 - 10 V DC, ±10 V DC, 0 - 20 mA, 4 - 20 mA, ±20 mA |
Excitation | 5 - 24 V DC |
Isolation | Yes |
Supply Power | 10 - 30 V DC, 10 - 30 V AC, 80 - 250 V AC |
- Simple DIN rail mountable programmable signal convertors.
- Multifunction input UNI (DC, PM, RTD, T/C, DU)
- TEACH-IN, DIGITAL FILTER, TARE
- Isolated, 10-30 V AC/DC
- Accuracy: ± 0,15 % of range (for 20 meas./s), ± 0,3 % of range PWR, T/C, ± 0,05 % of value UQC
- DIN Rail Mount
- IP20 rating
Interface | USB |
Input Type | ±30 mV DC, ±60 mV DC, ±1 V DC, ±2 V DC, ±5 V DC, ±10 V DC, ±20 V DC, ±40 V DC, ±80 V DC, 4 - 20 mA, ±5 mA, ±20 mA, ±90 mA, ±180 mA, Potentiometer, Resistance, Thermocouple, RTD |
# of Inputs | 1 |
Output Type | 0 - 2 V DC, 0 - 5 V DC, 0 - 10 V DC, ±10 V DC, 0 - 5 mA, 0 - 20 mA, 4 - 20 mA, RS-485 |
Isolation | Yes |
Supply Power | 10 - 30 V DC, 10 - 30 V AC |