KS91C, Sub-Miniature_IEPE_Accelerometer
These piezoelectric accelerometers are particularly suited for small and light test objects as well as test articles that have high resonant frequencies.
Features:
- IEPE voltage output for low mass test objects
- Wide dynamic range
- Low temperature coefficient
- High resonant frequency
- Connector with replaceable cable
- insulated base avoiding ground loops
Manufacturer: MMF
Quote
Datasheet
Specifications
Models & Accessories
Downloads
Similar Products
KS91C - Specifications
| Type | Voltage Mode (IEPE) |
| # of Axis | 1 |
| Full Scale | 500 g |
| Output | 10 mV/g |
| Material | Stainless Steel |
| Mounting | Adhesive |
| Connection | 2-Pin Axial Connector |
| Max Temperature | 120 °C |
KS91C - Models & Accessories
Models
| KS91C | Miniature Uni-axial Tear-Drop Accelerometer, Radial Connector 10mV/g, +/-600g range |
| KS93 | Sub-Miniature Uni-axial Accelerometer, Radial Connector 5pC/g, +/-6000g range |
Accessories
| 002 | Adhesive wax |
| 009-SUB-BNC-1,5 | Low-noise cable Subminiature / BNC; 1,5 m |
| 009-SUB-UNF-1,5 | Low-noise cable Subminiature / UNF 10-32; 1,5 m |
| 009/T-SUB-UNF-1,5 | High-temperature low-noise cable Subminiature / UNF 10-32; 1,5 m |
| 017 | Adapter UNF 10-32 (fem.) to BNC (male) |
| 016 | Coupler 2 x UNF 10-32 |
| 025 | Adapter UNF 10-32 to TNC |
| 038 | Instant glue |
| 039 | Removal tool for KS91C with adhesive mounting |
| 117 | Adapter UNF 10-32 to BNC |
| M208A | 8-channel IEPE conditioner |
| M29 | IEPE supply module |
| M72A1 | Charge Amplifier / IEPE Amplifier |
KS91C - Downloads
KS91CSub-Miniature IEPE Accelerometer Datasheet |
KS91C - Similar Products
- IEPE output: precision accelerometer with shear ceramics
- Sensitivity: 10mV/g to 100mV/g
- Well suited for Modal and Structural Analysis
- Frequency Response: 0.2Hz to 46kHz, -3db
- Operating Temperature: -20 to 120 deg.C
- Easy mounting by cubic case with M3 thread
- Versions with vertical and horizontal output
- TEDS
| Type | Voltage Mode (IEPE) |
| # of Axis | 1 |
| Full Scale | 50 g, 500 g |
| Output | 10 mV/g, 100 mV/g |
| Material | Stainless Steel, Aluminum |
| Mounting | Adhesive |
- IEPE output
- Compact design, round housing
- For adhesive, clamp or tube mounting
- UNF 10-32 socket (Microdot) Connector
| Type | Voltage Mode (IEPE) |
| # of Axis | 1 |
| Full Scale | 50 g, 500 g |
| Output | 10 mV/g, 100 mV/g |
| Material | Stainless Steel |
| Mounting | Adhesive |
- 10 mV/g to 100 mV/g
- acceleration and velocity transmitters
- Sealed to IP67
- Cabling for high temperature, Water & Oil Resistant
- Linear Frequency of 0.13 to 22000 Hz
| Type | Voltage Mode (IEPE) |
| # of Axis | 1 |
| Full Scale | 5 g, 50 g, 500 g |
| Output | 10 mV/g, 100 mV/g |
| Material | Stainless Steel |
| Mounting | Tapped Hole, M5 Thread |
- IEPE
- Lightweight
- 10 mV/g or 100 mV/g sensitivity
- 50g or 500g range
- 1 to 10,000 Hz frequency range (±5%)
- 10-32 axial connector
- 10-32 stud mount or adhesive mount
- Titanium
| Type | Voltage Mode (IEPE) |
| # of Axis | 1 |
| Full Scale | 50 g, 500 g |
| Output | 10 mV/g, 100 mV/g |
| Excitation | 18 - 30 V DC |
| Material | Titanium |
- Cost effective
- IEPE
- 10 mV/g sensitivity
- 500g range
- 1 to 10,000 Hz (±10%)
- Integral cable
- Adhesive mount
- Max. vibration: ± 600 G
| Type | Voltage Mode (IEPE) |
| # of Axis | 1 |
| Full Scale | 500 g |
| Output | 10 mV/g |
| Excitation | 18 - 30 V DC |
| Material | Stainless Steel |