KS74C, General Purpose - Industrial Accelerometer
These piezoelectric vibration sensors have been designed for application under rough environmental conditions. They are dust and water protected and their mounting base is insulated to avoid ground loops.
Features:
- 10 mV/g to 100 mV/g
- acceleration and velocity transmitters
- Sealed to IP67
- Cabling for high temperature, Water & Oil Resistant
- Linear Frequency of 0.13 to 22000 Hz
Manufacturer: MMF
Quote
Datasheet
Specifications
Models & Accessories
Downloads
Related Products
Similar Products
KS74C - Specifications
| Type | Voltage Mode (IEPE) |
| # of Axis | 1 |
| Full Scale | 5 g |
| 50 g | |
| 500 g | |
| Output | 10 mV/g |
| 100 mV/g | |
| Material | Stainless Steel |
| Mounting | Tapped Hole |
| M5 Thread | |
| Min Temperature | -20 °C |
| Max Temperature | 120 °C |
KS74C - Models & Accessories
Accessories
| 010-TNC-BNC-1.5 | low noise, TNC / BNC, 1.5 m, Ø 2,7 mm, 120 °C |
| Model 003 | Threaded Mounting Stud, M5 |
| Model 045 | Threaded Adapter, M5 to 10-32 |
KS74C - Downloads
KS74C -KS80D_KS81B_Accelerometer Datasheet |
KS74C - Related Products
- High dynamic range, good resolution
- Convenient calibration with sensor database
- Short training period due to modular software concept
- External messaging via email or radio control system
- Offline diagnosis with stored measuring data
- Frequency Range: 0.3 .. 2000 Hz (-3 dB)
- Input Ranges: ±10000 mV, ±1000 mV, ±100 mV
- A/D: 16 Bit, 10 kHz / Channel
| Input Type | Voltage |
| Analog Inputs | 2 |
| Digital Inputs | 2 |
- High dynamic range: 0.1 to 40,000 Hz
- A/D resolution: 24 bit
- Input Ranges: ±8000 mV, ±800 mV, ±80 mV
- TEDS: to IEEE 1451.4 standard
- Convenient calibration with sensor database
- Digital triggers: 2 at 0 .. 24 V, threshold: 1.5 V
| Input Type | Voltage |
| Analog Inputs | 2 |
| Digital Inputs | 2 |
- 8 Analog Input Channels
- 4 Analog Output Channels
- 4 Counter Input Channels
- 16 Digital I/O Channels
- Voltage or Current Inputs
- CANbus Interface with 2 Nodes
- Onboard Computation & Control Logic
- Aluminum Profile Housing
| Family | imc C-Series |
| Unit Type | Base , Standalone |
| Max Throughput | 400 kS/s |
| Input Type | Voltage, Current, ICP, Digital, Frequency, Encoder |
| Analog Inputs | 8 |
| Digital Inputs | 12 |
KS74C - Similar Products
- Extremely sensitive piezo system provides high resolution & low noise
- High sensitivity-to-mass ratio, excellent for low frequencies
- Full Range is +/-0.6g with a 200g over-range protection
- IEPE voltage output
- Operating Temperature: -20 to 120 degC.
| Type | Voltage Mode (IEPE) |
| # of Axis | 1 |
| Full Scale | 5 g |
| Output | 1000 mV/g |
| Material | Stainless Steel |
| Mounting | Tapped Hole, M5 Thread, M10 Thread |
- IEPE output: precision accelerometer with shear ceramics
- Sensitivity: 10mV/g to 100mV/g
- Well suited for Modal and Structural Analysis
- Frequency Response: 0.2Hz to 46kHz, -3db
- Operating Temperature: -20 to 120 deg.C
- Easy mounting by cubic case with M3 thread
- Versions with vertical and horizontal output
- TEDS
| Type | Voltage Mode (IEPE) |
| # of Axis | 1 |
| Full Scale | 50 g, 500 g |
| Output | 10 mV/g, 100 mV/g |
| Material | Stainless Steel, Aluminum |
| Mounting | Adhesive |
- IEPE output
- Compact design, round housing
- For adhesive, clamp or tube mounting
- UNF 10-32 socket (Microdot) Connector
| Type | Voltage Mode (IEPE) |
| # of Axis | 1 |
| Full Scale | 50 g, 500 g |
| Output | 10 mV/g, 100 mV/g |
| Material | Stainless Steel |
| Mounting | Adhesive |