KS963B, Triaxial Accelerometer
These rugged Tri-axial Accelerometers are Low Mass, as such are particularly well suited for testing light objects.
Features:
- Output: IEPE with optional TEDS
- Sensitivity: 10mV/g & 100mV/g
- Connector: 4 pin, 1/4-28 UNF, male
- Linear frequency range: 0.2 to 18000Hz (-3 dB)
- Weight: 8.5 gms & 11 gms
Manufacturer: MMF
Quote
Datasheet
Specifications
Models & Accessories
Downloads
Related Products
Similar Products
KS963B - Specifications
| Type | Voltage Mode (IEPE) |
| # of Axis | 3 |
| Full Scale | 50 g |
| 500 g | |
| Output | 10 mV/g |
| 100 mV/g | |
| Material | Aluminum |
| Mounting | Thru Hole |
| Max Temperature | 120 °C |
KS963B - Models & Accessories
Models
| KS963B10 | Range 500g |
| KS963B100 | Range 60g |
Accessories
| 027 | Calibration adapter for the triaxial accelerometers KS963 / KS973 |
| 034-B711f-BNC: | Adapter cable from Binder 711 to 3 BNC plugs, 0.5 m |
| 038 | Instant glue |
| 091-CMR-B711-3 | IEPE cable for triaxial accelerometers with 1/4″-28 UNF and Binder 711 connectors |
| 141B | Adapter for measurements with accelerometers on curved surfaces |
| 143B | Hand-held adapter for measurements on curved surfaces, M2,5 screw attachment |
| 308 | Magnetic base M3, large |
| 329 | Isolated mounting pad for adhesive attachment M3, large |
| M208A | 8-channel IEPE conditioner |
| M29 | IEPE supply module |
| M72A3 | Charge Amplifier / IEPE Amplifier |
KS963B - Downloads
KS963B Tri-axial Accelerometer Datasheet |
KS963B - Related Products
- Binder 711 female Connector on Sensor end
- BNC connector on Instrument end
- Temp. Range is -20 to 80 °C
- Cable Ø - 2,7 mm
- Quick delivery on quantity of 1 to 10.
This cable is for IEPE, can be provided in lengths from 3 ft. (1 m) up to 15 ft. (5 m).
- 1/4-28, 4 pins female connector on Sensor end
- Binder 711 male connector on Instrument end
- Temp. Range is -20 to 120 °C
- Cable Ø - 2,1 mm
- Quick delivery on quantity of 1 to 10.
This cable is for IEPE, can be provided in lengths of 10 ft. (3 m).
- Measurement and display of RMS and peak values.
- Wide frequency range (Bandwidth) from 0.1 Hz to 100 kHz
- Incremental gain of 0.1 to 1000 for input / transducer sensitivity.
- Vibration monitoring with relay outputs.
- Relay output with adjustable trip levels
- Remote measurement via Ethernet interface and web browser.
- TEDS support IEEE 1451.4 with automatic transducer sensitivity normalization
- Bench top or 19" rack mounting enclosure
| Input Type | Piezoelectric (IEPE) |
| # of Inputs | 8 |
| Output Type | ±10 V DC |
| Max Bandwidth | 100 kHz |
| Supply Power | 10 - 28 VDC |
| Min Temperature | -10°C |
- Unity Gain
- BNC Input & Output Connectors
- Powered from 5 .. 28 VDC,
- Modules join together for powering multiple channels
| Input Type | 0 - 10 V AC, IEPE |
| # of Inputs | 1 |
| Output Type | ±10 V DC |
| Bandwidth | 20 kHz |
| Supply Power | 5 V DC, 10 - 30 V DC |
Quote
Datasheet
M72A1 / M72A3 / M72S1 - 1 – 3 channel Desktop / Rack Mount charge or IEPE Signal Conditioners - Gain Selections: 0,1 / 1 / 10 / 100 / 1000 mV/pC; 0 / 20 / 40 / 60 dB
- Single and Double Integrators
- Low pass filters: 0.1 / 1 / 10 / 50 kHz
- High pass filters: 0.1 / 3 Hz
- 4 digit mV or pC LED display(s)
- Input & Output BNC connectors
- USB interface on M72S8, Rack Case
- Power Supply: 7-30Vdc, 115 Vac Adaptor
| Input Type | 0 - 10 V AC, Piezoelectric (IEPE) |
| # of Inputs | 1, 3 |
| Output Type | ±10 V DC |
| Max Bandwidth | 50 kHz |
| Supply Power | 9 V DC (Battery), 24 - 30 V DC, 115 V AC |
| Min Temperature | -10°C |
- High dynamic range, good resolution
- Convenient calibration with sensor database
- Short training period due to modular software concept
- External messaging via email or radio control system
- Offline diagnosis with stored measuring data
- Frequency Range: 0.3 .. 2000 Hz (-3 dB)
- Input Ranges: ±10000 mV, ±1000 mV, ±100 mV
- A/D: 16 Bit, 10 kHz / Channel
| Input Type | Voltage |
| Analog Inputs | 2 |
| Digital Inputs | 2 |
- High dynamic range: 0.1 to 40,000 Hz
- A/D resolution: 24 bit
- Input Ranges: ±8000 mV, ±800 mV, ±80 mV
- TEDS: to IEEE 1451.4 standard
- Convenient calibration with sensor database
- Digital triggers: 2 at 0 .. 24 V, threshold: 1.5 V
| Input Type | Voltage |
| Analog Inputs | 2 |
| Digital Inputs | 2 |
- Synchronous display of up to four spectra per window
- High frequency resolution
- Five window functions
- Two measuring cursors with magnitude and frequency display - Peak and RMS analysis
- Measurement of vibration velocity, displacement & acceleration in VM-FFT+
- Power spectral density (PSD) in VM-FFT+
- Envelope spectrum for roller bearing monitoring in VM-FFT+
- Limit curve with external alarms in VM-FFT+
PC based measuring system software using the IEPE / USB interfaces M302/M312 and IEPE compatible accelerometers or microphones.
- Condition monitoring of rotating and reciprocating machines to ISO 20816-1, ISO 10816-6, IEC 60034-14, etc.
- Electronic identification of measurement points with VMID points via the sensor base
- USB interface, PC software for measuring point management to MIMOSA convention and measuring data archiving
- Spectral analysis (FFT) for acceleration and velocity
- General vibration measurement in laboratory and industry
- Vibration Velocity; 0.1 - 1000 mm/s; 10 - 1000 Hz
General Vibration Measurements, Signal Processing & Numerical / Graphical Display for Quality Control and Industrial Process Monitoring. The display is a Brilliant, power-saving colored OLED.
- Long-term recording and display of vibration level up to 24 hours
- Recorded data can be viewed using zoom and scroll functions
- RMS, positive/negative peak, peak-to-peak, instantaneous value with VM-PLOT+
- Measurement of vibration of velocity, displacement, acceleration and acoustic values in VM-PLOT+
- Synchronous display of up to four signals per window
- Two time axes: clock time and elapsed time
- High pass and low pass filters
- Export function as bitmap, EMF or text file
PC based measuring system using the IEPE / USB interfaces M302 or M312 and IEPE compatible sensors providing recording of RMS or peak values of slowly changing vibration signals
- Automatic operation by rotary speed detection
- Display of measuring results as polar graphic and numbers
- Very simple installation and operation
- User guidance by clear text instructions
- Extremely compact - VM-BAL fits into a small carrying case
- Versatile instrument at an economic price
Up to six correction methods of Balancing of long and disk-shaped rotors in one or two planes. Available as kit including all necessary hardware and software as
VM-BAL Kit One for one plane or VM-BAL Kit Two for two planes.
KS963B - Similar Products
- Output: IEPE with optional TEDS
- Sensitivity: 10mV/g & 100mV/g
- Connector: 4 pin, Binder 707
- Linear frequency range: 0.2 to 22000Hz (-3 dB)
- Weight: 16 gms
| Type | Voltage Mode (IEPE) |
| # of Axis | 3 |
| Full Scale | 50 g, 250 g, 500 g |
| Output | 10 mV/g, 14 mV/g, 100 mV/g |
| Material | Stainless Steel, Aluminum |
| Mounting | Thru Hole |
- IEPE output: precision accelerometer with shear ceramics
- Sensitivity: 10mV/g to 100mV/g
- Well suited for Modal and Structural Analysis
- Frequency Response: 0.2Hz to 46kHz, -3db
- Operating Temperature: -20 to 120 deg.C
- Easy mounting by cubic case with M3 thread
- Versions with vertical and horizontal output
- TEDS
| Type | Voltage Mode (IEPE) |
| # of Axis | 1 |
| Full Scale | 50 g, 500 g |
| Output | 10 mV/g, 100 mV/g |
| Material | Stainless Steel, Aluminum |
| Mounting | Adhesive |
- Output: IEPE with TEDS
- Sensitivity: 10mV/g & 100mV/g
- Linear Frequency Response: 0.15 to 22000 Hz
- Connector: 4 pins, 1/4-28 UNF, male
- Ranges: ±60g & ±600g
| Type | Voltage Mode (IEPE) |
| # of Axis | 3 |
| Full Scale | 50 g, 500 g |
| Output | 10 mV/g, 100 mV/g |
| Mounting | 1/4-28 Tapped Hole |
| Connection | 4-Pin Radial Connector |
- IEPE
- Triaxial
- 360° cable orientation
- Low profile
- 10 mV/g, 50 mV/g, or 100 mV/g sensitivity available
- 50g, 100g or 500g range available
- 0.5 to 3,000 Hz frequency range (±5%)
- 4-pin 1/4-28 radial connector
| Type | Voltage Mode (IEPE) |
| # of Axis | 3 |
| Full Scale | 50 g, 100 g, 500 g |
| Output | 10 mV/g, 50 mV/g, 100 mV/g |
| Excitation | 18 - 30 V DC |
| Material | Titanium |
- Compatible with standard aircraft on-board power supplies (+20 to +32 VDC)
- 360° cable orientation
- 10 mV/g and 100 mV/g sensitivity available
- 50g and 500g range available
- 4 to 2,000 Hz frequency range (±5%)
- 1/4-28 4-pin radial connector
- Ø.14 thru hole mount
- Weight: 10 grams
| Type | Voltage Mode (IEPE) |
| # of Axis | 1 |
| Full Scale | 50 g, 500 g |
| Output | 10 mV/g, 100 mV/g |
| Excitation | 20 - 32 V DC |
| Material | Titanium |