TEL1-PCM, Strain Gauge Telemetry System
This is a Single Channel Digital Telemetry System for Strain Gage Applications on Rotating Shafts and Moving Structures. The measurements are digitally transmitted and regenerated as an Analog Output.
Features:
- Easy to assemble and operate
- Full- and half bridge Strain Gauge configurations
- Auto-Zero adjustment can be Set on the receiver
- Gain: 250-8000 can be Set on the receiver side
- Transmitter Distance to Receiver up to 25mm (35mm Optional)
- Signal bandwidth 0…1200Hz (-3dB)
- Output +/-10V and digital for interface (Option)
Quote
Brochure
Specifications
Applications
Models & Accessories
Downloads
Similar Products
TEL1-PCM - Specifications
| Input Types | Strain Gauge |
| Temperature | |
| No. of Inputs | 1-2 |
| Output | Analog |
TEL1-PCM - Applications
Telemetry for Wind Energy Applications
Optimized for telemetry applications on wind turbines. For non-contact measurement of torque and power transmission, rotor and generator shafts, bending and torsion on rotor blades.
With inductive power supply for continuous and simultaneous measurements, time-synchronous transmission of up to 256 channels and a data transfer rate up to 10 Mbit/s.
Whether low speeds and high torque on the rotor or high speeds with low torque to the generator, KMT provides the optimum solution for every application for continuous operation, even under extreme conditions.
- Torque, speed of gear, rotor and generator shafts
- Bending and twisting moments on rotor blades
- Vibration analysis of rotor blades
- Pressure and tension loads of individual components of the drive train
- Temperature monitoring of heat-sensitive components
Installation examples, Battery Powered ( for short duration tests) and Inductive Powered ( for long duration tests)
Battery Powered TEL1 Inductive Powered TEL1 Inductive Powered TEL1
TEL1-PCM - Models & Accessories
Models
| TEL1 | Single Channel Strain Gauge Telemetry Transmitter |
| TEL1-PCM | Single Channel Strain Gauge Telemetry System |
| TEL1-PCM-TH-K | K Type Thermocouple Transmitter |
| TEL1-PCM-PHPU-L | Inductive data pickup and power head L & 5m Cable |
| TEL1-PCM-SET-1_STG | Telemetry System for strain gages on a shaft diameter < 400 mm, Inductive Power Head 7 Signal Pickup not included |
| TEL1-PCM-SET-2_THK-C | Telemetry System for K type TC for shaft diameter < 400 mm, Inductive Power Head 7 Signal Pickup not included |
| TEL1-SP-H-D15-30mm | Split Housing, epoxy resin, 2 half rings for shaft O.D. from 15 mm to 30 mm |
| TEL1-SP-H-D31-50mm | Split Housing, epoxy resin, 2 half rings for shaft O.D. from 31 mm to 50 mm |
| TEL1-SP-H-D51-100mm | Split Housing, epoxy resin, 2 half rings for shaft O.D. from 51 mm to 100 mm |
| TEL1-SP-H-D101-150mm | Split Housing, epoxy resin, 2 half rings for shaft O.D. from 101 mm to 150 mm |
| TEL1-SP-H-D151-250mm | Split Housing, epoxy resin, 2 half rings for shaft O.D. from 151 mm to 250 mm |
| TEL1-SP-H-D251-350mm | Split Housing, epoxy resin, 2 half rings for shaft O.D. from 251 mm to 350 mm |
| TEL1-SP-H-D351-500mm | Split Housing, epoxy resin, 2 half rings for shaft O.D. from 351 mm to 500 mm |
| TEL1-SP-H-D501-800mm | Split Housing, epoxy resin, 2 half rings for shaft O.D. from 501 mm to 800 mm |
TEL1-PCM - Downloads
TEL1-PCM-IND_datasheet_ATI_2018 Brochure |
KMT-Wind Energy Hydropower Telemetry Application examples App Note |
TEL1-PCM - Similar Products
- Torque, Force, Strain, Pressure measurements in restricted spaces
- Well suitable for high rpm of shafts
- Full & Half Bridge Strain Gauge configurations
- Digital Transmission achieved inductively
- Signal bandwidth 0…1200Hz (-3dB)
- Multiple Systems can operated at the same time
| Input Types | Strain Gauge, Temperature |
| No. of Inputs | 1-2 |
| Output | Analog |
Quote
Datasheet
CLSx - Steering Effort Sensor - Steering Effort Sensor-Top accuracy, ultra slim shape - Ultra slim sensor body design for seamless integration with minimal extension of steering column
- All functions of the steering wheel are preserved
- Steering torque range ±100 Nm or ±200 Nm
- Steering angle range ±1475°
- Rotational velocity range ±1000°/sec
- Acceleration in x, y, z direction (optional)
- Rotational acceleration (optional)
- Data output: CAN and analog
| Input Types | Strain Gauge, Vdc |
| No. of Inputs | 1-2 |
| Output | Analog, Ethernet, CANbus |
- Static & Dynamic measurements up to 24,000 Hz
- 2 to 64 channel systems
- Inputs for Strain Gauges, Temperature, ICP sensors or Voltages
- 4 Vdc Excitation & Gains selectable, 125, 250, 500, 1000 or 2000
- 16 bit ADC, simultaneous sampling
- Full software programmable & Auto Zero calibration
- Inductive or battery powered
- Rugged, water proof housing
| Input Types | Strain Gauge, Vdc, Temperature |
| No. of Inputs | 8 +, 2-20 |
| Output | Analog |
- Up to six analog inputs per transmitter unit: strain gauges, temperatures, analog signals, freely programmable
- Sampling rate up to 4,8 kHz (16 bit) per channel
- Synchronous data collection and processing of up to 4 transmitters (SCTs)
- Integrated standard interfaces: Analog, CAN, Ethernet
- Extended Temperature available -40 °C to +125 °C (Dx-HT)
- Measurement value output in physical units available
- No authorization required for radio transmission (2.4 GHz band)
- Convenient parametrization by RemusLAB software or web browser
| Input Types | Strain Gauge, Vdc, Temperature, Frequency |
| No. of Inputs | 2-20 |
| Output | Analog, CANbus |
- Measurement of driving and breaking torques
- sealed IP67 (waterproof)
- Transmitter electronics integrated in sensor
- My = 3.000 Nm (4.500 Nm optional)
- Power supply: rechargeable battery (approx. 50 h operating time)
- Working temperature (Sensor): -10°C … +60°C
- Programmable amplifiers with autozero function
- Convenient parameterization by RemusLAB or webbrowser
| Input Types | Strain Gauge, Temperature |
| No. of Inputs | 2-20 |
| Output | Analog, Ethernet, CANbus |