VM-BAL, VibroMetra Vibration & Balancing Software
Up to six correction methods of Balancing of long and disk-shaped rotors in one or two planes. Available as kit including all necessary hardware and software as
VM-BAL Kit One for one plane or VM-BAL Kit Two for two planes.
Features:
- Automatic operation by rotary speed detection
- Display of measuring results as polar graphic and numbers
- Very simple installation and operation
- User guidance by clear text instructions
- Extremely compact - VM-BAL fits into a small carrying case
- Versatile instrument at an economic price
Manufacturer: MMF
Quote
Datasheet
Description
Models & Accessories
Downloads
Related Products
VM-BAL - Description
The VM-BAL software module, part of the VibroMetra vibration measurement system, is engineered for precise on-the-spot balancing of both long and disk-shaped rotors under operational conditions, aimed at vibration reduction. It supports one or two-plane balancing with features like automatic operation via rotary speed detection, simple setup, and user-friendly instructions for ease of operation. The software's ability to save and continue measuring runs later, along with auxiliary functions like test mass and RPM recommendations, enhance user support.
Features for VM-BAL Models
| VM-BAL |
| Mass correction by adding mass |
| Balancing aim unbalance/mass |
| Vibration measurands: v |
| VM-BAL+ |
| Mass correction by adding mass |
| Mass correction by removing mass |
| Mass correction at fixed positions: 3 to 99 |
| Balancing aim unbalance/mass |
| Vibration measurands: v |
| VM-BAL++ |
| Mass correction by adding mass |
| Mass correction by removing mass |
| Mass correction by drilling or milling |
| Mass correction by rotary rings |
| Mass correction by sliding blocks or set screws |
| Mass correction at fixed positions: 3 to 99 |
| Mass correction with a list of mass pieces |
| Balancing aim unbalance/mass |
| Balancing aim balance quality |
| Balancing aim vibration amplitude |
| Rotary speed recommendation |
| Creating a defined unbalance |
| Test mass recommendation |
| Leave test mass at rotor |
| Combine correction masses of several balancing runs |
| Saving rotor data |
| Saving balancing runs |
| Vibration measurands : a; v; d |
You can find a step-by-step process for precision balancing, for VM-BAL MMF in this video:
VM-BAL - Models & Accessories
Models
| VM-BAL | VM-BAL, Balancing Collection & Analysis Software |
| VM-BAL+ | Balancing System, for adding and removing mass |
| VM-BAL++ | Balancing System, for adding & removing mass, Radial Drilling, Milling, etc. |
Accessories
| M312B | VibroMetra USB sensor interface |
| VM-PS | Photoelectrir reflex switch with magnetic stand |
VM-BAL - Downloads
VM-BAL-VibraMetra Balancing System Datasheet |
AN31e-vm-Balance Software Application Note App Note |
AN33e-vm-Balance Software Application Note App Note |
vm Balance Software quickstart manual Tech Note |
VM-BAL - Related Products
- High dynamic range, good resolution
- Convenient calibration with sensor database
- Short training period due to modular software concept
- External messaging via email or radio control system
- Offline diagnosis with stored measuring data
- Frequency Range: 0.3 .. 2000 Hz (-3 dB)
- Input Ranges: ±10000 mV, ±1000 mV, ±100 mV
- A/D: 16 Bit, 10 kHz / Channel
| Input Type | Voltage |
| Analog Inputs | 2 |
| Digital Inputs | 2 |
- High dynamic range: 0.1 to 40,000 Hz
- A/D resolution: 24 bit
- Input Ranges: ±8000 mV, ±800 mV, ±80 mV
- TEDS: to IEEE 1451.4 standard
- Convenient calibration with sensor database
- Digital triggers: 2 at 0 .. 24 V, threshold: 1.5 V
| Input Type | Voltage |
| Analog Inputs | 2 |
| Digital Inputs | 2 |
- IEPE output: precision accelerometer with shear ceramics
- Sensitivity: 10mV/g to 100mV/g
- Well suited for Modal and Structural Analysis
- Maximum 8000 g
- Frequency Response: 0.2Hz to 16kHz, -3db
- Operating Temperature: -20 to 120 deg.C
- Clip Mounting in 3 directions
- TEDS
| Type | Voltage Mode (IEPE) |
| # of Axis | 1 |
| Full Scale | 50 g, 500 g |
| Output | 10 mV/g, 100 mV/g |
| Material | Stainless Steel |
| Connection | 10-32 Micro Coaxial |
- 10 mV/g to 100 mV/g
- acceleration and velocity transmitters
- Sealed to IP67
- Cabling for high temperature, Water & Oil Resistant
- Linear Frequency of 0.13 to 22000 Hz
| Type | Voltage Mode (IEPE) |
| # of Axis | 1 |
| Full Scale | 5 g, 50 g, 500 g |
| Output | 10 mV/g, 100 mV/g |
| Material | Stainless Steel |
| Mounting | Tapped Hole, M5 Thread |