VM-PLOT, PC Measuring & Display Software
PC based measuring system using the IEPE / USB interfaces M302 or M312 and IEPE compatible sensors providing recording of RMS or peak values of slowly changing vibration signals
Features:
- Long-term recording and display of vibration level up to 24 hours
- Recorded data can be viewed using zoom and scroll functions
- RMS, positive/negative peak, peak-to-peak, instantaneous value with VM-PLOT+
- Measurement of vibration of velocity, displacement, acceleration and acoustic values in VM-PLOT+
- Synchronous display of up to four signals per window
- Two time axes: clock time and elapsed time
- High pass and low pass filters
- Export function as bitmap, EMF or text file
- Offline analysis of stored measuring data
Manufacturer: MMF
Quote
Datasheet
Models & Accessories
Downloads
Related Products
VM-PLOT - Models & Accessories
Models
| VM-PLOT | AC Voltage & Vibration Acceleration |
| VM-PLOT+ | AC Voltage, Vibration Acceleration, Velocity & Displacement |
| VM-PLOT SE | combined license VM-SE FMS and VM-PLOT |
Accessories
| M312B | VibroMetra USB sensor interface |
| VM-ADAM | VibroMetra license for event messenger via digital outputs |
| VM-MAIL | VibroMetra license for event messenger via email |
VM-PLOT - Downloads
VM-Plot & VM-Scope Vibration Monitoring Software Datasheet |
VM-PLOT - Related Products
- High dynamic range, good resolution
- Convenient calibration with sensor database
- Short training period due to modular software concept
- External messaging via email or radio control system
- Offline diagnosis with stored measuring data
- Frequency Range: 0.3 .. 2000 Hz (-3 dB)
- Input Ranges: ±10000 mV, ±1000 mV, ±100 mV
- A/D: 16 Bit, 10 kHz / Channel
| Input Type | Voltage |
| Analog Inputs | 2 |
| Digital Inputs | 2 |
- High dynamic range: 0.1 to 40,000 Hz
- A/D resolution: 24 bit
- Input Ranges: ±8000 mV, ±800 mV, ±80 mV
- TEDS: to IEEE 1451.4 standard
- Convenient calibration with sensor database
- Digital triggers: 2 at 0 .. 24 V, threshold: 1.5 V
| Input Type | Voltage |
| Analog Inputs | 2 |
| Digital Inputs | 2 |
- IEPE output: precision accelerometer with shear ceramics
- Sensitivity: 10mV/g to 100mV/g
- Well suited for Modal and Structural Analysis
- Maximum 8000 g
- Frequency Response: 0.2Hz to 16kHz, -3db
- Operating Temperature: -20 to 120 deg.C
- Clip Mounting in 3 directions
- TEDS
| Type | Voltage Mode (IEPE) |
| # of Axis | 1 |
| Full Scale | 50 g, 500 g |
| Output | 10 mV/g, 100 mV/g |
| Material | Stainless Steel |
| Connection | 10-32 Micro Coaxial |
- Output: IEPE with TEDS
- Sensitivity: 10mV/g & 100mV/g
- Linear Frequency Response: 0.15 to 22000 Hz
- Connector: 4 pins, 1/4-28 UNF, male
- Ranges: ±60g & ±600g
| Type | Voltage Mode (IEPE) |
| # of Axis | 3 |
| Full Scale | 50 g, 500 g |
| Output | 10 mV/g, 100 mV/g |
| Mounting | 1/4-28 Tapped Hole |
| Connection | 4-Pin Radial Connector |
- 10-32 UNF connectors
- M3 Subminiature Connectors
- Binder 711 & 713 straight & angled connectors
- 1/4-28, 4 pins, miniature connectors
- BNC connectors
- Flying Leads
MMF provide a comprehensive range of accessories for Charge & IEPE sensors that are flexible and reliable. There are a numerous cable combinations from sensor mating connectors to the instrumentation with flying leads or BNC connectors