SI-USB3, 2 & 4 Channel Data Acquisition Module
- Input ranges for mV/V, V and mA
- Input Types; Load Cells, Potentiometer, Temperature Probes, Quadrature Encoders
- Input Types can be intermixed
- 16 bit A/D with sample of up to 5kHz
- Digitally selectable analogue input filters, 30, 300 & 3000 Hz
- Synchronicity of measuring input channels
- Adjustment and control signal activation via software
- LabVIEW and DLL-drivers available
SI-USB3-DAS Module Selection Chart
Input Type | Voltage |
Current | |
Strain Gauge | |
Thermocouple/RTD | |
Digital | |
Frequency | |
Encoder | |
Analog Inputs | 1 |
2 | |
4 | |
Digital Inputs | 2 |
Typical Applications
- Mobile test measurements using a laptop
- Experimental setups in test laboratories
- Secondary measurements of control devices
- PC-based recordings of strain characteristics
- measurements in chemical & biotechnology industries
Many standard sensors, such as force-, torque-, displacement- and pressure sensors, linear potentiometers, temperature probes PT100 etc., can be used with the SI-USB3. The sensor parameters can be stored in the SI-USB3. After a single parameterization, each sensor is automatically recognized by the software.
The voltage supply of the SI-USB3 is provided by an external 110Vac adapter, or by a 10 to 30 Vdc Power Supply. The connected sensors are directly supplied with voltage through the measuring amplifier which eliminates the need for separate sensor supply voltage. The low-pass filter second order allows filtration of unwanted frequencies. Here you can distinguish between four cutoff frequencies.
The connection to LabVIEW or integration into own programs is possible with the available driver package.
If a control signal is integrated in the sensor, an automatic adjustment can be carried out and checked at any time (measuring chain monitoring).
The following Sensor output signals can be digitally converted and conveniently displayed and evaluated via the free evaluation software:
- Load, Torque, Strain or Pressure Input range ±3 mV/V (Excitation 4V ≤20 mA)
- Process Signal or Sensor Input range ±5V/±10V (Sensor supply 12V ≤80 mA)
- Process Transmitter or Sensor Input range 0/4 ... 20 mA (Sensor supply 12V ≤80 mA)
- Linear or Rotary Potentiometer Input range 0 ... 5V (Sensor supply 5V ≤170 mA)
- RTD - PT100 Input range -200 ... 860 °C (Sensor supply 4V ≤20 mA)
- Quadrature Encoder for speed /angle measurement Input range 5V TTL (Sensor supply 5V ≤85 mA)
SI-USB3 | Base Unit for up to 4 Input Channels |
SI-USB3/DMS | Strain Gauge Sensor Input Module, +/-3mV/V, 4 Vdc Exc. |
SI-USB3/4.5 mV/V | Strain Gauge Sensor Input Module, +/-4.5mV/V, 4 Vdc Exc. |
SI-USB3/U5 | 5 Vdc Input Module, 12 Vdc Exc. |
SI-USB3/U10 | 10 Vdc Input Module, 12 Vdc Exc. |
SI-USB3/I0 | 0 to 20 mA input module , 12 Vdc Exc. |
SI-USB3/I4 | 4 to 20 mA Input Module, 12 Vdc Exc. |
SI-USB3/I10 | Current Input of 10 mA +/- 10mA, 12 Vdc Exc. |
SI-USB3/I12 | Current Input of 12 mA +/- 8mA, 12 Vdc Exc. |
SI-USB3/LP | Potentiometer or 0-5 Vdc Input Module, 5 Vdc Exc. |
SI-USB3/PT100 | RTD Input Module for -200 ... 860 deg.C. |
SI-USB3/TTL | Encoder or Frequency, 5V TTL Input Module, 5 Vdc Exc. |
SI-USB3-DAS Input Module Order Codes
SI-USB3-DAS Module Input Pin Connections
SI-USB3 4Chn USB Data Acquisition System Datasheet |
- Fast Measurement of up to 2500/s
- Up to 16 Bit Resolution
- Full Synchronism of both Measuring Channels
- Input Ranges for mV, V and mA
- Input Ranges combinable with each other
- Adjustment and Control Trigger via PC Software (USB)
Input Type | Voltage, Current, Strain Gauge |
Analog Inputs | 2 |
- USB-Sensor-Interface with Configuration and Evaluation Software
- Supply of the MeasuringSystem via PC USB Port
- Fast Measurement of up to 5000 Measurements/s
- Up to 16 bit Resolution
- Input Ranges for mV, V and mA
- Integrable in large Sensors as Board
- Adjustment and Control Signal Switch via Software
- High Level of Protection IP67
Input Type | Voltage, Current, Strain Gauge |
Analog Inputs | 1 |
- Input ranges for mV/V, V and mA
- Input Types; Load Cells, Potentiometer, Temperature Probes, Quadrature Encoders
- Input Types can be intermixed
- 16 bit A/D with sample of up to 5kHz
- Digitally selectable analogue input filters
- Adjustment and control signal activation via software
- LabVIEW and DLL-drivers available
- Protection Level of IP67
Input Type | Voltage, Current, Strain Gauge, Thermocouple/RTD, Digital, Frequency, Encoder |
Analog Inputs | 1, 2 |
Digital Inputs | 2 |
- High dynamic range, good resolution
- Convenient calibration with sensor database
- Short training period due to modular software concept
- External messaging via email or radio control system
- Offline diagnosis with stored measuring data
- Frequency Range: 0.3 .. 2000 Hz (-3 dB)
- Input Ranges: ±10000 mV, ±1000 mV, ±100 mV
- A/D: 16 Bit, 10 kHz / Channel
Input Type | Voltage |
Analog Inputs | 2 |
Digital Inputs | 2 |
- High dynamic range: 0.1 to 40,000 Hz
- A/D resolution: 24 bit
- Input Ranges: ±8000 mV, ±800 mV, ±80 mV
- TEDS: to IEEE 1451.4 standard
- Convenient calibration with sensor database
- Digital triggers: 2 at 0 .. 24 V, threshold: 1.5 V
Input Type | Voltage |
Analog Inputs | 2 |
Digital Inputs | 2 |