KS77C100, Universal Accelerometer
The accelerometers on this page are appropriate for standard applications in laboratory and industry.
Features:
- Shear-type accelerometer with IEPE output
- Two sensitivity versions (10 and 100 mV/g)
- Low sensitivity to temperature transients
- Low influence of base bending effects
- High linear band width
- Low noise, high resolution
- Rugged stainless steel housing
Manufacturer: MMF
Quote
Datasheet
Description
Specifications
Models & Accessories
Downloads
Similar Products
KS77C100 - Description
The accelerometers on this page are suitable for standard applications in laboratory and industry.
KS77C100 - Specifications
| Type | Voltage Mode (IEPE) |
| # of Axis | 5 |
| Material | Stainless Steel |
| Mounting | M5 Thread |
| Connection | Radial |
| UNF 10-32 | |
| Min Temperature | -40 °C |
| Max Temperature | 120 °C |
| Lower frequency limit (3 dB) | 0.13 Hz |
| Upper frequency limit (3 dB) | 24 kHz |
KS77C100 - Models & Accessories
Accessories
| 001 | Hand-held probe M5 (male) |
| 003 | Stud bolt M5 x 8 |
| 006 | Insulating flange 2 x M5 (male) |
| 008 | Rare-earth magnetic base, M5 (male) |
| 009-UNF-BNC-1,5 | Low-noise cable UNF 10-32 / BNC; 1,5 m |
| 009-UNF-UNF-1,5 | Low noise cable UNF 10-32 / UNF 10-32; 1,5 m |
| 010-UNF-BNC-10 | Low-noise cable UNF 10-32 / BNC; 10 m |
| 010-UNF-BNC-5 | low noise, UNF 10-32 to BNC, 5 m, Ø 2,7 mm, 120 °C |
| 016 | Coupler 2 x UNF 10-32 |
| 017 | Adapter UNF 10-32 (fem.) to BNC (male) |
| 025 | Adapter UNF 10-32 to TNC |
| M29 | IEPE supply module |
| 029 | Adhesive pad, insulating, M5 (male) |
| 030 | Triaxial mounting cube 3 x M5 |
| 045 | Stud adapter M5 (male) / UNF 10-32 (male) |
| 046 | Stud adapter M5 (male) / 1/4″-28 (male) |
| 117 | Adapter UNF 10-32 to BNC |
| M208A | 8-channel IEPE conditioner |
| M72A1 | Charge Amplifier / IEPE Amplifier |
KS77C100 - Downloads
KS77C100 Datasheet |
KS77C100 - Similar Products
- Uniaxial accelerometer
- Shear-type accelerometer with IEPE output
- Available in two sensitivity versions (10 and 100 mV/g)
- Low sensitivity to temperature transients and base bending effects
- High linear bandwidth
- Low noise with high resolution
- Rugged stainless steel housing
- Temperature range: -40 to 120°C
| Type | Voltage Mode (IEPE) |
| # of Axis | 1 |
| Output | 100 mV/g |
| Mounting | M5 Thread |
| Connection | Axial, UNF 10-32 |
| Min Temperature | -40 °C |
- Uniaxial accelerometer
- Shear-type accelerometer with IEPE output
- Available in two sensitivity versions (10 and 100 mV/g)
- Low sensitivity to temperature transients and base bending effects
- High linear bandwidth up to 33 kHz
- Low noise with high resolution
- Rugged stainless steel housing
- Temperature range: -40 to 130°C
| Type | Voltage Mode (IEPE) |
| # of Axis | 1 |
| Output | 10 mV/g |
| Material | Stainless Steel |
| Mounting | M5 Thread |
| Connection | Radial, UNF 10-32 |
- Low-cost shear type IEPE accelerometer
- Two sensitivity versions (10 and 100 mV/g)
- Includes electronic data sheet (TEDS; IEEE 1451.4; Template 25 w. DS2431)
- Suitable for light test objects
- Insulated base against ground loops
| Type | Voltage Mode (IEPE) |
| Full Scale | 60 g |
| Material | Stainless Steel |
| Mounting | M5 Thread |
| Connection | Axial, UNF 10-32 |
| Min Temperature | -40 °C |
- Uniaxial accelerometer
- Shear-type accelerometer with IEPE output
- Available in two sensitivity versions (10 and 100 mV/g)
- Low sensitivity to temperature transients and base bending effects
- High linear bandwidth up to 37 kHz
- Low noise with high resolution
- Rugged stainless steel housing
- Temperature range: -40 to 130°C
| Type | Voltage Mode (IEPE) |
| # of Axis | 1 |
| Output | 10 mV/g |
| Material | Stainless Steel |
| Mounting | M5 Thread |
| Connection | Axial, UNF 10-32 |
- Well suited for modal and structural analysis
- Wide dynamic range
- Low amplitude and phase error
- Easy mounting by cubic case with M3 thread
- Sensitive axis transverse to connector
- Two sensitivity versions (10 and 100 mV/g)
- Includes electronic data sheet (TEDS; IEEE 1451.4; Template 25 w. DS2431)
| Type | Voltage Mode (IEPE) |
| Material | Stainless Steel, Aluminum |
| Mounting | M3 |
| Connection | Radial, UNF 10-32 |
| Min Temperature | -40 °C |
| Max Temperature | 100 °C |