KS901B10, Universal Accelerometer
- OEM transducer for drill hole mounting
- Low-cost transducer for mass production
- Two sensitivity versions (10 and 100 mV/g)
These OEM accelerometers are suitable for applications in customer products.
Preferred mounting method is gluing into a hole.
Type | Voltage Mode (IEPE) |
Output | 10 mV/g |
Material | Stainless Steel |
Mounting | Adhesive |
Connection | Axial |
UNF 10-32 | |
Min Temperature | -30 °C |
Max Temperature | 120 °C |
Lower frequency limit (3 dB) | 0.35 Hz |
Upper frequency limit (3 dB) | 28 kHz |
002 | Adhesive wax |
009-UNF-BNC-1,5 | Low-noise cable UNF 10-32 / BNC; 1,5 m |
009-UNF-UNF-1,5 | Low noise cable UNF 10-32 / UNF 10-32; 1,5 m |
010-UNF-BNC-10 | Low-noise cable UNF 10-32 / BNC; 10 m |
010-UNF-BNC-5 | low noise, UNF 10-32 to BNC, 5 m, Ø 2,7 mm, 120 °C |
016 | Coupler 2 x UNF 10-32 |
017 | Adapter UNF 10-32 (fem.) to BNC (male) |
025 | Adapter UNF 10-32 to TNC |
038 | Instant glue |
117 | Adapter UNF 10-32 to BNC |
M29 | IEPE supply module |
KS901B10 Datasheet |
- IEPE voltage output for low mass test objects
- Wide dynamic range
- Low temperature coefficient
- High resonant frequency
- Connector with replaceable cable
- insulated base avoiding ground loops
Type | Voltage Mode (IEPE) |
# of Axis | 1 |
Full Scale | 500 g |
Output | 10 mV/g |
Material | Stainless Steel |
Mounting | Adhesive |
- OEM transducer for drill hole mounting
- Low-cost transducer for mass production
- Two sensitivity versions (10 and 100 mV/g)
Type | Voltage Mode (IEPE) |
Material | Stainless Steel |
Mounting | Adhesive |
Connection | Axial, UNF 10-32 |
Min Temperature | -30 °C |
Max Temperature | 100 °C |