8435, Burster Load Cell, Miniature Tension Compression
- Tension & Compression
- Accuracy: ±0.60% F.S.
- Outer Diameter: 29.0mm
- Height: 18.0mm
- Connection: 2m Integral Cable
- Stainless Steel
- Simple Mounting
This model of load cell uses proven strain gauge technology to perform measurements. Strain gauges are applied to the sensitive element and connected to form a full bridge. The electrical resistance of this full bridge increases with the load acting on it, so that the bridge supplies an output voltage proportional to the measurement variable.
This model allows the force application of two kinds: compression via the load application button and tension via the centric internal thread. The measurement range of 0 ... 5000 N is supplied exclusively with the integrated load application button. The sensor has to be mounted on a level surface using screws fitted through the three bore holes in the outer ring.
To achieve the highest possible measurement accuracy, the sensor should not be subject to lateral forces. A strain-relief and an anti-bend mechanism for the connection cable are integrated in the sensor housing.
Load introduction button, Model 8580-V004
Installation Example
Type | Load Button |
Application | Tension & Compression |
Full Scale | 45 lbs |
112 lbs | |
220 lbs | |
450 lbs | |
1120 lbs | |
Output | 1 mV/V |
Precision | ±0.60 % FS |
Excitation | 5 V DC |
IP Rating | IP54 |
Min Temperature | -30 °C |
Max Temperature | 80 °C |
This tension and compression load cell is designed as a compact and universal sensor, which provides a high level of precision at a low price.
The sensor has small dimensions and allows easy assembly in existing structures where static and dynamic forces need to be measured.
Burster's 8435 Miniature Load Cell is typically used for measuring forces, weights, coefficients of friction, sliding friction and adhesion on fitting devices, handling gear, coupling mechanisms, loading machines and operating devices.
A load-centering plate is offered as an accessory for simple installation of the load cell in a girder assembly.
8435-6005 | |
8435-6002 | |
8435-6001 | |
8435-5500 | |
8435-5200 |
8435, Miniature Tension-Compression Datasheet |
8435-5200 CAD Drawing Drawings |
8435-5200-v008 CAD Drawing Drawings |
8435-5500 CAD Drawing Drawings |
8435-5500-v008 CAD Drawing Drawings |
8435-6001 CAD Drawing Drawings |
8435-6001-v008 CAD Drawing Drawings |
8435-6002 CAD Drawing Drawings |
8435-6002-v008 CAD Drawing Drawings |
8435-6005 CAD Drawing Drawings |
8435-6005-v008 CAD Drawing Drawings |
- With Standardized Output Signal
- Compression
- Accuracy: Range 1 kN: ±0.75% F.S.
- Accuracy: Range > 1 kN: ±0.50% F.S.
- Outer Diameter: 12.7mm - 44.0mm
- Height: 9.6 mm - 38.0 mm
- Connection: 2m Integral Cable
- Stainless Steel
Type | Load Button |
Application | Compression |
Full Scale | 220 lbs, 450 lbs, 1120 lbs, 2200 lbs, 4500 lbs, 11200 lbs, 22000 lbs |
Output | 1.5 mV/V |
Precision | ±0.5 % FS, ±0.75 % FS |
Excitation | 3 V DC |
- Compression
- Accuracy: Range ≤ 2000 N: < ±0.50% F.S.
- Accuracy: Range 5000 N: < ±0.75% F.S.
- Outer Diameter: 20mm
- Height: 7mm - 9mm
- Connection: 2m Integral Cable
- Stainless Steel
Type | Load Button |
Application | Compression |
Full Scale | 45 lbs, 112 lbs, 220 lbs, 450 lbs, 1120 lbs |
Output | 1 mV/V |
Precision | ±0.5 % FS, ±0.75 % FS |
Excitation | 5 V DC |
- Dragchain Cable
- Compression
- Accuracy: < ±0.85% F.S.
- Outer Diameter: 10.6mm - 12.6mm
- Height: 5.0mm - 7.5mm
- Connection: 2m Integral Cable
- Stainless Steel
Type | Load Button |
Application | Compression |
Full Scale | 4.5 lbs, 11.2 lbs, 22 lbs, 45 lbs, 112 lbs, 220 lbs, 450 lbs, 1120 lbs |
Output | 0.8 mV/V, 5 - 30 mV/V |
Precision | ±0.85 % FS |
Excitation | 5 V DC |
- Simple Screw Mounting
- Tension & Compression
- Accuracy: Range ≤ 500 N: < ±0.9% F.S.
- Accuracy: Range ≥ 1000 N: < ±0.5% F.S.
- Outer Diameter: 12.0mm - 20.0mm
- Height: 28.0mm - 40.0mm
- Connection: 2m Integral Cable
- Stainless Steel
Type | Rod Type |
Application | Tension & Compression |
Full Scale | 11.2 lbs, 22 lbs, 45 lbs, 112 lbs, 220 lbs, 450 lbs, 1120 lbs |
Output | 1.2 mV/V, 5 - 30 mV/V |
Precision | ±0.5 % FS, ±0.9 % FS |
Excitation | 5 V DC |
- Minimum Lateral Sensitivity
- Tension & Compression
- Accuracy: Range: ±0.5% F.S.
- Outer Diameter: 30mm - 50mm
- Height: 34mm - 62mm
- Connection: 1.1m Integral Cable
- Stainless Steel
Type | Rod Type |
Application | Tension & Compression |
Full Scale | 4.5 lbs, 11.2 lbs, 22 lbs, 45 lbs, 112 lbs, 220 lbs, 450 lbs, 1120 lbs, 2200 lbs |
Output | 1 mV/V |
Precision | ±0.5 % FS, ±0.75 % FS |
Excitation | 5 V DC, 5 V AC |