MC8, Force and Torque Sensor
- High-capacity, six-axis transducer designed to quantify loads up to 30,000
- Manufactured from high strength 17-4 stainless steel
- Elastomeric 0-ring seals protect the strain gauges and wiring
Channels | 6 (Fx, Fy, Fz, Mx, My, Mz) |
Full Scale (Fz) | 10000 lbs |
20000 lbs | |
30000 lbs | |
Non-Linearity | ± 0.2 % FS |
Dimensions | 203 x 203 x 203 mm |
Body Material | Stainless Steel |
Min Temperature | -18 °C |
Max Temperature | 52 °C |
MC8-10000 | Fz Range: 10000 lbs |
MC8-20000 | Fz Range: 20000 lbs |
MC8-30000 | Fz Range: 30000 lbs |
MC8 Force and Torque Sensor Datasheet |
- Designed for accurate underwater force measurement
- Surfaces are equipped with threaded holes
- Operation underwater with little effect on the force and moment outputs due to water pressure
Channels | 6 (Fx, Fy, Fz, Mx, My, Mz) |
Full Scale (Fz) | 100 lbs, 250 lbs, 500 lbs, 1000 lbs |
Non-Linearity | ± 0.2 % FS |
Dimensions | 88.9 x 75.44 mm |
Body Material | Stainless Steel |
Min Temperature | -18 °C |
- Compact and waterproof six-axis sensor
- Body of the load cell is manufactured from heat treated 17-4 PH stainless steel
Channels | 6 (Fx, Fy, Fz, Mx, My, Mz) |
Full Scale (Fz) | 250 lbs, 500 lbs |
Non-Linearity | ± 0.2 % FS |
Dimensions | 82.55 x 25.4 mm |
Body Material | Stainless Steel |
Min Temperature | -18 °C |
- Compact six-component force sensor
- Stainless steel body and an oil-filled pressure compensation bladder to enable short-term (<24 hours) continuous submersion in fresh water
Channels | 6 (Fx, Fy, Fz, Mx, My, Mz) |
Full Scale (Fz) | 1000 lbs, 2000 lbs |
Non-Linearity | ± 0.2 % FS |
Dimensions | 63.5 x 63.5 mm |
Body Material | Stainless Steel |
Min Temperature | -18 °C |
- Compact six-component force sensor
- Ability to be submersed in fresh water (<24 hours)
Channels | 6 (Fx, Fy, Fz, Mx, My, Mz) |
Full Scale (Fz) | 1000 lbs, 2000 lbs |
Non-Linearity | ± 0.2 % FS |
Dimensions | 64 x 64 mm |
Body Material | Stainless Steel |
Min Temperature | -18 °C |