1144/1146, Platinum Resistance Thermometer Simulation
The precision resistors of the models 1144 and 1146 consist of low-capacity and low-inductance wire coils made of MANGANIN®, which are cast in small plastic cylinder housings. Prior to comparison, the resistance bodies are exposed to a...
Features:
- More than 60 fixed temperature values from - 200 C... + 850 C are in stock
- Calibration in acc. with DIN EN 60751
- +/- 0.02% tolerance for the models 1144-Pt 100, 1144-Pt 500 and 1144-Pt 1000
- +/- 0.05% tolerance from the resistance value in the range - 200 C...- 50 C the model 1146-Pt 100
Manufacturer: Burster Praezisionsmesstechnik Gmbh
Quote
Datasheet
Description
Specifications
Applications
Models & Accessories
Downloads
Similar Products
1144/1146 - Description
The precision resistors of the models 1144 and 1146 consist of low-capacity and low-inductance wire coils made of MANGANIN®, which are cast in small plastic cylinder housings.
Prior to comparison, the resistance bodies are exposed to a meticulous artificial aging procedure. This special method and comparison at approximately only half of the nominal tolerance guarantee long-term stability of < 0.02 % over the course of years.
Prior to comparison, the resistance bodies are exposed to a meticulous artificial aging procedure. This special method and comparison at approximately only half of the nominal tolerance guarantee long-term stability of < 0.02 % over the course of years.
1144/1146 - Specifications
| Output Type | RTD |
1144/1146 - Applications
Today resistance thermometers are one of the important precision and operating measurement instruments of technical temperature measurement. Fast and easy testing of display, control and recording devices in measurement and process engineering is essential. Fixed temperature values can easily be simulated according to the characteristic curves of Pt100, Pt500 and Pt1000 using the precision resistors calibrated in °C (the inscription also includes the resistance value in Ω).
The small dimensions of the resistors allow the installation in measuring instruments or measuring circuits for comparison or control measurements.
Consideration of the ambient temperature is not necessary and the temperature coefficient of < 10 ppm of the used material MANGANIN® is negligible.
The small dimensions of the resistors allow the installation in measuring instruments or measuring circuits for comparison or control measurements.
Consideration of the ambient temperature is not necessary and the temperature coefficient of < 10 ppm of the used material MANGANIN® is negligible.
1144/1146 - Models & Accessories
Models
| 1144-Pt 100 | |
| 1144-Pt 500 | |
| 1144-Pt 1000 | |
| 1146-Pt 100 |
1144/1146 - Downloads
Platinum Resistance Thermo Series Datasheet |
1144/1146 - Similar Products
- Simulation range -100 °C up to +500 °C
- Resolution 0.1 °C
- Calibration in accordance to DIN EN 60751
- Simulation of line resistance 10 Ohms, 20 Ohms or 30 Ohms
- Compact, easy to handle aluminium-housing
| Output Type | RTD |
- 24 set temperature values
- Calibration per DIN EN 60751
- Resistor material: ZERANIN®
- Temperature coefficient ≤ 2 ppm/K
- Pt 100, Pt 500, Pt 1000
| Output Type | RTD |
- Range: -200°C ...+850°C (Accuracy: 0.02°C)
- Simulation of Pt100, Pt200,Pt500, Pt1000, Ni100 & Ni1000 Sensors
- Temperature scales: ITS 90 & IPTS 68
- Manual or remote control via RS232/IEEE488
- A sturdy aluminium housing
| Output Type | RTD |
- Wide Range of Inputs and Outputs all in one Digistant
- Simulate and Measure
- Vdc: 1mV up to 20V
- Current: 1mA up to 24mA
- Resistance: 5Ω up to 4000Ω & HART: 250Ω
- Frequency/Pulse: 2 CPM up to 10KHz
- RTD: Pt100 l 1000, Ni
- TC: J, K, T, E, R, S, B, C
| Input Type | DC Voltage, DC Current, Thermocouple, RTD |
| Output Type | DC Voltage, DC Current, Thermocouple, RTD |
| Interface | USB |
| Supply | Battery, 230 V AC |
- DC voltage up to ±100.0000 V, ±0.002 %
- DC current up to ±50.0000 mA, ±0.005 %
- Thermocouple simulation of R, S, B, J, T, E, K, N, M, C, D, G2
- 32 Automatic sequence functions ( ramp function, max. of 100 steps )
- can be operated both via the keypad or via the Ethernet & USB interfaces
- RTD Simulation Pt100 ... Pt1000, Ni100 ... Ni1000 (optional)
- True ohmic resistance simulation 10 Ω ... 300 kΩ (optional)
- Frequency simulation 0.01 Hz ... 15 kHz (optional)
| Input Type | DC Voltage, DC Current, Thermocouple, RTD |
| Output Type | DC Voltage, DC Current, Thermocouple, RTD |
| Interface | USB, Ethernet TCP/IP |