8413, Burster Load Cell, Subminiature
- High Resonance Frequencies
- Compression
- Accuracy: Range ≤ 5 N: < ±0.50% F.S.
- Accuracy: Range ≥ 10 N: < ±0.25% F.S.
- Outer Diameter: 9.7mm - 19.1mm
- Height: 3.4mm - 6.4mm
- Connection: 1.5m Integral Cable
- Stainless Steel
The Burster sub-miniature compression load cells are flat, cylindrical with covered bottoms. The load application button for receiving the compression forces is an integrated part of the top, which is the sensor's membrane. The strain gauges are applied on the back and wired to a full Wheat-stone bridge, which results in voltage output proportional to the load applied. The connecting cable of the load cell features a covered correction network on a small board. The sensor's temperature compensation is installed here. Due to its extremely small dimensions, this model is perfect for use in applications with limited space. The small diameters result in high resonance frequencies.
Type | Load Button |
Application | Compression |
Full Scale | 0.55 lbs |
1.1 lbs | |
2.2 lbs | |
4.5 lbs | |
11.2 lbs | |
22 lbs | |
45 lbs | |
112 lbs | |
220 lbs | |
450 lbs | |
1120 lbs | |
Output | 1.5 mV/V |
2 mV/V | |
15 mV/V | |
Precision | ±0.25 % FS |
±0.5 % FS | |
Excitation | 5 V DC |
IP Rating | IP54 |
Min Temperature | -55 °C |
Max Temperature | 120 °C |
These Burster subminiature compression load cells have to be installed very carefully. They must be mounted on a flat and even surface using contact adhesive, wax or a small laminated spring to hold the sensor body down. Pre-loads which could have a direct impact on the sensor body, and clamping the sensor on its sheath are to be avoided. The measuring force has to be applied centrically and free from lateral forces which have to be kept away from the sensor using levers or guide ways. Mounting must always be performed manually without use of power tools. Overload damage during the mounting process can be passively prevented by electrically connecting the sensor and displaying the force value.
8413-2.5 | |
8413-5 | |
8413-10 | |
8413-20 | |
8413-100 | |
8413-50 | |
8413-200 | |
8413-500 | |
8413-1000 | |
8413-2000 | |
8413-5000 |
8413 and 8414, Subminiature Compression Load Cell Datasheet |
8413-2_5 Drawings |
8413-2_5-v010 Drawings |
8413-5 Drawings |
8413-5-v010 Drawings |
8413-10 Drawings |
8413-10-v010 Drawings |
8413-20 Drawings |
8413-20-v010 Drawings |
8413-50 Drawings |
8413-50-v010 Drawings |
8413-100 Drawings |
8413-100-v010 Drawings |
8413-200 Drawings |
8413-200-v010 Drawings |
8413-500 Drawings |
8413-500-v010 Drawings |
8413-1000 Drawings |
8413-1000-v010 Drawings |
8413-2000 Drawings |
8413-2000-v010 Drawings |
8413-5000 Drawings |
8413-5000-v010 Drawings |
- High Resonance Frequencies
- Compression
- Accuracy: Range ≤ 5 N: < ±0.50% F.S.
- Accuracy: Range ≥ 10 N: < ±0.25% F.S.
- Overload Protection
- Outer Diameter: 9.4mm
- Height: 6.4mm
- Connection: 1.5m Integral Cable
Type | Load Button |
Application | Compression |
Full Scale | 0.55 lbs, 1.1 lbs, 2.2 lbs, 4.5 lbs, 11.2 lbs, 22 lbs |
Output | 1 mV/V, 12 mV/V |
Precision | ±0.25 % FS, ±0.5 % FS |
Excitation | 5 V DC |
- With Standardized Output Signal
- Compression
- Accuracy: Range 1 kN: ±0.75% F.S.
- Accuracy: Range > 1 kN: ±0.50% F.S.
- Outer Diameter: 12.7mm - 44.0mm
- Height: 9.6 mm - 38.0 mm
- Connection: 2m Integral Cable
- Stainless Steel
Type | Load Button |
Application | Compression |
Full Scale | 220 lbs, 450 lbs, 1120 lbs, 2200 lbs, 4500 lbs, 11200 lbs, 22000 lbs |
Output | 1.5 mV/V |
Precision | ±0.5 % FS, ±0.75 % FS |
Excitation | 3 V DC |
- High Resonance Frequency
- Tension & Compression
- Accuracy: Better than ±0.5% of F.S.
- Outer Diameter: 12.7mm - 19.1mm
- Height: 16.6mm - 25.1mm
- Stainless Steel
- Connection: 1.5m Integral Cable
Type | Rod Type |
Application | Tension & Compression |
Full Scale | 0.55 lbs, 1.1 lbs, 2.2 lbs, 4.5 lbs, 11.2 lbs, 22 lbs, 45 lbs, 112 lbs, 220 lbs, 450 lbs, 1120 lbs |
Output | 2 mV/V, 15 mV/V |
Precision | ±0.5 % FS |
Excitation | 5 V DC |
- 0-10 N to 0-5 kN [0-2.25 lbf to 0-1.12 klbf]
- Diameter 25mm [0.98”]
- For Static and Dynamic Applications
- Strain Relief Spring
- Load Washer Model
- Flat sensor
- Temperature compensated
Type | Load Button |
Application | Compression |
Full Scale | 2.2 lbs, 4.5 lbs, 11.2 lbs, 22.5 lbs, 45 lbs, 112 lbs, 225 lbs, 450 lbs, 1124 lbs |
Output | 15 mV/V |
Precision | ±0.5 % FS |
Excitation | 10 V DC |
- Compression
- Accuracy: Range ≤ 2000 N: < ±0.50% F.S.
- Accuracy: Range 5000 N: < ±0.75% F.S.
- Outer Diameter: 20mm
- Height: 7mm - 9mm
- Connection: 2m Integral Cable
- Stainless Steel
Type | Load Button |
Application | Compression |
Full Scale | 45 lbs, 112 lbs, 220 lbs, 450 lbs, 1120 lbs |
Output | 1 mV/V |
Precision | ±0.5 % FS, ±0.75 % FS |
Excitation | 5 V DC |